In stock
- Lot-matched resin sealed and batch-traceable for repeatable prints
- Validated LSPc profile exposure and cure settings for your Nexa3D printer
Nexa3D xMODEL15-White Resin – High-Detail Model Photopolymer for XiP | 1.5 kg
$96
What your process engineer actually checks
Sealed cartridges with lot traceability
Every xMODEL15-White cartridge ships sealed with its batch number recorded, so a print that drifts can be traced back to a lot instead of guessed at. Validated LSPc exposure and cure settings for XiP and XiP Pro come with the order.
A materials engineer on the line
Questions on cure settings, finishing or switching from another resin? Our engineers run Nexa3D LSPc resins in-house. Sub-4h reply, NDA standard.
Nexa3D xMODEL15-White is an economical 405 nm LSPc photopolymer for fast, high-detail concept and appearance models. The white base takes primer, paint and plating, and shows fine geometry crisply under studio lighting.
Why engineers choose xMODEL15-White
A low-cost model resin that still prints sharp edges and survives handling.
Fine detail in white
White pigment holds crisp edges, small text and thin ribs, so review models read clearly under studio lighting.
Built for 405 nm LSPc
Viscosity of 200–300 mPa·s at 30 °C keeps the membrane fed, so full plates finish at LSPc layer rates.
Rigid enough to handle
55 MPa tensile strength, 1800 MPa modulus and 78–80 D Shore hardness stand up to sanding, drilling and passing around a table.
Paint and plating base
The white body needs less primer than dark resins and hides seam lines, which shortens the route to a finished appearance model.
How we supply xMODEL15-White
From formulation to a cured part on your bench.
Formulated & tested
Genuine Nexa3D 405 nm LSPc photopolymer, characterised against the ASTM and GB/T methods listed in the property table below.
Stocked & lot-matched
1.5 kg cartridges are held in US stock, sealed and batch-traceable, and dispatched in 2 business days.
Print, wash & cure
Wash in xClean then IPA in under five minutes, dry the part, then UV post-cure to reach the published properties.
Physical and mechanical properties
| Property | Method | Value |
|---|---|---|
| Viscosity, 30 °C | GB/T 22235 | 200–300 mPa·s |
| Modulus of elasticity | ASTM D638 | 1800 MPa |
| Tensile strength | ASTM D638 | 55 MPa |
| Elongation at break | ASTM D638 | 10% |
| Shore hardness (0s, 3s) | ASTM D2240 | 78–80 D |
| HDT @ 0.45 MPa | ASTM D648 | 58.3 °C |
| HDT @ 1.82 MPa | ASTM D648 | 53.3 °C |
| Water absorption (24 h) | ASTM D570 | 0.7% |
| Density | GB/T 4472 | 1.09–1.10 g/cc |
Printed properties depend on part geometry, orientation and post-cure. Values are typical, not a specification.
Typical applications
Where teams put xMODEL15-White to work.
Compatible printers & post-processing
This 1.5 kg cartridge is the format for the Nexa3D XiP and XiP Pro desktop LSPc printers. The same resin is also offered as a 5 kg bottle for the NXE 400 and NXE 400 Pro, so a model shop can keep one material across desktop and production frames. Post-processing is short: wash in xClean followed by an IPA rinse, keeping total wash time under about five minutes, dry the part fully, then UV post-cure. Longer solvent soaks are not needed and can soften fine features, so hold the wash time and let the cure do the work.
Not sure xMODEL15-White is the right resin?
Three neighbours in the Nexa3D LSPc line.
Why source xMODEL15-White through Additive Plus
- Genuine Nexa3D xMODEL15-White in the 1.5 kg cartridge — lot-matched, US stock, ships in 2 business days.
- Validated LSPc exposure and cure profiles for XiP and XiP Pro, supplied with the order.
- Materials engineers who run Nexa3D LSPc resins in-house — sub-4h reply, NDA standard.
- Volume pricing and official purchase orders supported for production accounts.
Downloads
| Brand | Nexa3D |
| Available colors | White |
| Weight | 1.5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Technology | LSPc |
| Package | 1.5 kg cartridge |
| Material form | Liquid photopolymer resin |
| Printer | XiP, XiP Pro |
| Tensile Strength | 55 MPa |
| Tensile Modulus (MPa) | 1800 MPa |
| Elongation at Break (%) | 10% |
| Shore Hardness (3s) | 78–80 D |
| [email protected] MPA (°C) | 58.3 °C |
| Water Absorption (24hr) % | 0.7% |
| Resin Type | General |
| Application | Engineering, Manufacturing |
Product videos
We stock the full Nexa3D LSPc resin line and support official purchase orders and volume pricing. Tell us your printer and monthly volume and we'll match the right resin and quantity.
Other products teams run alongside Nexa3D xMODEL15-White Resin – High-Detail Model Photopolymer for XiP | 1.5 kg
- ✔ Specialty technical ceramic produced on an everyday FFF machine
- ✔ Print → debind → sinter to dense ceramic, no powder system required
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
HDT100°C ABS/PP alternative: Tough end-use parts & tooling. High impact/elongation.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
Washing solvent for rinsing uncured resin off SLA and LSPc 3D-printed parts — holds around 3× the dissolved resin of IPA and has a higher flash point, so it is safer to handle and lasts longer between changes.
- ✓ ~3× the resin capacity of IPA — fewer changeouts, less waste
- ✓ Higher flash point than IPA · leaves no greasy residue · water-rinse after
- ✓ 5 L · US-made · available on request (not in stock)
Out of stock
· Not in stock — available on request
x45 Clear is a tough, durable resin for models and functional prototypes needing high strength — at print speeds beyond 15 cm/hr.
- ✓ High strength and durability for functional prototypes and rugged models
- ✓ Very fast printing — vertical build speed exceeding 15 cm/hr on Nexa3D systems
- ✓ Genuine Nexa3D resin for NXE-series printers · 5 kg
Made to order
· Currently on backorder — contact us for lead time
The most accessible resin on our Cubic Ink shelf — $119 per kg ($111.80/kg in the 5 kg canister). High Performance 2-1400 VP-SLA is the material ALTANA builds for laser SLA machines, supplied in translucent blue, with 10 kg canisters available on request — the only Cubic Ink resin offered that way.
New in the September 2026 range: ask us for the technical datasheet and print parameters for your machine, and we will send them the same day we have your printer model.
Made to order
- 1K continuous carbon fiber engineered for FibreSeeker 3 co-extrusion
- ~60% fiber volume fraction, tensile strength up to 900 MPa
- Continuous load paths for strong, lightweight structural parts
In stock
· In stock · ships from the US
xDENT341-Beige is Nexa3D's precision model resin for LSPc printers — 93% dimensional accuracy at 50 µm deviation, built for removable die models with the margins and contacts crown and bridge work depends on.
- ✓ 93% accuracy at 50 µm — against a dental-industry norm nearer 65%
- ✓ Removable dies that seat and return to position · Shore 84 D keeps margins crisp
- ✓ Traditional beige reads like stone for margin and contact assessment
- ✓ Genuine Nexa3D · 1.5 kg cartridge for XiP · ships in 1–2 business days
In stock
· Ships in 1–2 business days from US stock.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers does Nexa3D xMODEL15-White work with?
What colors and pack sizes does xMODEL15 come in?
How do I wash and post-cure parts printed in xMODEL15-White?
What is xMODEL15-White best suited for?
How should xMODEL15-White be stored?
Does xMODEL15-White carry any certifications?
Can I test xMODEL15-White before committing to volume?
Place your order, or talk to an engineer first
Order Nexa3D xMODEL15-White Resin – High-Detail Model Photopolymer for XiP | 1.5 kg direct, or talk to materials engineer