Out of stock
- Genuine Henkel Loctite Cleaner C lot-traceable, 18 kg
- Per-resin wash guidance times and validated workflow
Loctite 3D Cleaner C — IPA-Free Resin Cleaner for SLA/DLP Parts | 18 kg
- ✓ Holds >15% dissolved resin vs IPA under 10% — fewer changeouts
- ✓ IPA-free, high flash point (75 °C), water-rinseable
- ✓ 18 kg · currently not in stock — ask us for an equivalent cleaner
Availability: currently not in stock. Leave a request and we will suggest an equivalent cleaner for your resin and printer. Cubic Ink equivalents →
$297
What your process engineer actually checks
Cleaner than IPA, safer to store
Cleaner C is IPA-free and holds more than 15% dissolved resin before it needs changing — versus under 10% for IPA — so a bath lasts longer and you swap solvent less often. With a 75 °C flash point it is non-flammable at ambient temperature, unlike IPA, which simplifies storage and handling.
A materials engineer on the line
Not a ticket queue. We run resin post-processing in-house, so wash-time and rinse advice per resin comes from the floor. Sub-4h reply, NDA on request.
Loctite 3D Cleaner C is an IPA-free cleaning liquid that removes uncured resin from SLA and DLP 3D-printed parts before UV curing. It holds more than 15% dissolved resin — versus under 10% for IPA — is non-flammable at ambient temperature, and rinses off in water.
Why labs switch from IPA to Cleaner C
A longer-lasting, non-flammable, water-rinseable resin wash.
IPA-free, non-flammable at ambient
A 75 °C flash point means Cleaner C is non-flammable at ambient temperature — unlike IPA, whose low flash point makes it a fire and storage hazard. Simpler storage, no flammable-cabinet requirement.
Holds more resin, changes less
Cleaner C dissolves more than 15% resin before it needs replacing, against under 10% for IPA. The bath cleans more parts between changeouts, which cuts solvent consumption, waste and running cost.
Water-rinseable, clean finish
After the Cleaner C bath, a short rinse in clean water removes residual cleaner and resin, leaving a clean surface ready for UV curing — no greasy film to interfere with the cure.
Reaches intricate features
At 14 cP it flows into fine channels and detailed geometry to lift uncured resin from the places hand-wiping and thicker solvents miss — right for jewelry, dental models and detailed engineering parts.
How to wash with Cleaner C
A two-bath immerse, rinse and dry — then cure.
Immerse & agitate
Wash parts in Cleaner C at 20–50 °C for about 2–4 minutes with agitation, ideally in a two-bath setup (used first bath, fresh second bath).
Rinse in water
Rinse in clean DI water for 1–2 minutes with agitation to remove residual cleaner and dissolved resin from the part.
Dry, then cure
Dry the parts — typically about 60 minutes at 20–25 °C — before UV post-curing, so the cure starts on a clean, dry surface.
Where Cleaner C fits
Standard resin cleaning, IPA-free, at ambient-to-warm temperatures.
Key specifications
- Type: IPA-free glycol-ether cleaning liquid for SLA/DLP resin parts · clear
- Flash point: 75 °C (167 °F) — non-flammable at ambient · initial boiling point: 190 °C (374 °F)
- Viscosity: 14 cP at 20 °C · resin capacity: >15% (IPA <10%)
- Use: 20–50 °C bath, 2–4 min immerse + water rinse, dry ~60 min before UV cure
- Container: 18 kg · Henkel IDH 2582488
See the Specifications tab and the resin TDS for validated wash times.
Not sure Cleaner C is the right cleaner?
Match the cleaner to your resin, temperature and ecosystem.
Why buy Cleaner C through Additive Plus
- Authorized Henkel Loctite reseller — genuine, lot-traceable material
- Lead time confirmed by email on every order
- Per-resin wash-time and workflow guidance from a team that runs it in-house
- <24h response · 120+ materials supported across 23 countries
| Brand | Henkel Loctite |
| Available colors | Clear |
| Viscosity at 25°C (77°F) cP | 14 |
| Flash point °C (°F) | 75 (167) |
| Initial Boiling Point °C (°F) | 190 (374) |
| Vapour pressure at 20 °C | 0.2 / 0.15 hPa/mm Hg |
| Vapour pressure at 50 °C | 1.7 / 1.28 hPa/mm Hg |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
Tell us your resins and whether your wash bath is heated — a materials engineer will confirm whether Cleaner C or the hot-bath Cleaner T fits your workflow, with per-resin wash times.
Other products teams run alongside Loctite 3D Cleaner C — IPA-Free Resin Cleaner for SLA/DLP Parts | 18 kg
- 10 kg sealed package · $75/kg · in stock
- Fine ~50 µm powder · narrow PSD · high reusability
- Materials engineer on call · setup recommendations · NDA on request
For CO₂ / infrared SLS systems · order direct below or talk to an engineer first.
In stock
xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.
- ✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
- ✓ Compatible with thousands of commercial injection materials, including reinforced grades
- ✓ Fully dissolvable — undercuts and internal features release without side actions
- ✓ Genuine Nexa3D · 5 kg · in stock — ships within 5–7 business days
Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →
In stock
· Ships in 1–2 business days from US stock.
Need a HIPed titanium build platform for a different printer model or custom dimensions? Request a custom quote — we manufacture precision HIPed titanium build plates and additive manufacturing platforms for most metal AM systems.
Other materials available upon request.Made to order
· 4-5 weeks
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
- ✓ High tensile, fatigue & creep strength to 1300°F (704°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on request · in US stock, ready to ship
In stock
· In US stock · ready to ship
- ✔ High strength and hardness (precipitation-hardenable), good corrosion resistance
- ✔ Print → debind → sinter to dense metal — ideal for functional and tooling parts
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- 1K continuous glass fiber for FibreSeeker 3 co-extrusion
- Up to 714 MPa tensile strength, balanced mechanical performance
- Electrically insulating — for non-conductive structures
In stock
· In stock · ships from the US
Fast, easy-to-print functional resin with a strong balance of toughness, impact resistance and HDT — robust enough for drilling, grinding and real functional parts.
- ✓ High impact resistance — 36 J/m notched Izod, 12% elongation, 380 J/m unnotched
- ✓ 73 MPa tensile · 2800 MPa modulus · 84 Shore D — stiff yet not brittle
- ✓ Post-machinable (drill, grind); uncolored, black & custom colors
- ✓ A cost-effective alternative to Loctite IND403 HDT80
Made to order
· Ships in 5–10 business daysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
What is Loctite 3D Cleaner C and what does it clean?
Is it really non-flammable, and is it IPA-free?
How does its cleaning capacity compare to IPA?
How do I use it in the wash workflow?
Which resins and printers is it for?
Do I still need to rinse after using Cleaner C?
What size does it come in and how fast does it ship?
Place your order, or talk to an engineer first
Order Loctite 3D Cleaner C — IPA-Free Resin Cleaner for SLA/DLP Parts | 18 kg direct, or talk to materials engineer
