In stock
Zetasinter Alumina Tube (previous tubular furnace)
Replacement alumina tube for the earlier Zetasinter tubular furnace.
- ✔ Fits the previous-generation Zetasinter tubular furnace, not the 4L
- ✔ Genuine Zetamix by Nanoe component
- ✔ Confirm your furnace generation before ordering — we will check it with you
$2,142
The right tube depends on which Zetasinter generation you run
Made for the earlier furnace
This alumina tube fits the previous-generation Zetasinter tubular furnace, not the 4L. Using the genuine Zetamix by Nanoe part for your generation keeps the fit and thermal envelope your process relies on.
We check your generation
Send us your furnace serial or part number and we confirm you are on the tubular furnace and ordering the correct tube. It ships from California, invoiced in USD, with a typical lead time of 10 to 20 business days.
Replacement alumina tube for the earlier Zetasinter tubular furnace — the previous generation, not the 4L. A direct-fit part built by Zetamix by Nanoe.
Why source it through Additive Plus
A genuine Zetamix by Nanoe part, matched to your furnace generation and shipped from stock in the United States.
OEM alumina tube built to spec for the previous-generation Zetasinter tubular furnace.
Send your furnace serial and we confirm the tube matches your furnace generation before you order.
Stocked and shipped from California, invoiced in USD, typical lead time 10 to 20 business days.
Compatibility & specifications
- Fits the previous-generation Zetasinter tubular furnace, not the 4L
- Replacement alumina furnace tube
- Genuine Zetamix by Nanoe component
- Typical lead time 10–20 business days depending on order queue
- Shipped from California, invoiced in USD
Before you order
This tube fits the previous-generation Zetasinter tubular furnace, not the Zetasinter 4L. Confirm your furnace generation before ordering — send us your furnace serial and we will check it with you before you order.
| Brand | Zetamix by Nanoe |
Other products teams run alongside Zetasinter Alumina Tube (previous tubular furnace)
Airtight syringe-barrel end caps for the Sygnis F-NIS 3D printer — seal filled or pre-filled barrels for clean storage and transport.
- ✓ Airtight seal keeps contaminants out during storage and transport
- ✓ Lets you pre-fill syringe barrels — less waste, faster changeovers
- ✓ Sold in packs · in stock and ships fast
In stock
· 2 Business Days
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement outer vat container for the Nexa3D XiP Pro — the rigid tray that holds the resin vat and membrane assembly in place. A cracked or resin-fouled container compromises the seal and the vat above it; this genuine replacement drops straight back in.
- ✓ Rigid outer container for the XiP Pro resin vat assembly
- ✓ Direct fit for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Single heating resistance for the Zetasinter chamber furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Replacement tool kit for the Nexa3D XiP — the hand tools Nexa3D supplies for everyday operation and maintenance, from part removal to routine upkeep. A handy set to replace lost tools or equip a second workstation.
- ✓ Genuine Nexa3D XiP hand-tool set
- ✓ For part removal and routine XiP maintenance
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Luer-lock tip caps for Sygnis F-NIS syringe barrels — they form an airtight seal so you can pre-fill barrels, cut waste and protect material from contamination during storage and transport. Compatible with all F-NIS barrel sizes.
- ✓ Airtight luer-lock seal — pre-fill and store without waste
- ✓ Fits all F-NIS barrel sizes · $12.80 per pack of 20
- ✓ In US stock · order by request — use the quote button
In stock
· 2 Business Days
Dual-head frame reinforcement for the 3DCeram M.A.T. — mount two FFF or two DPE heads for bi-material printing.
- ✓ Two heads mounted simultaneously
- ✓ Bi-material printing in a single build
- ✓ Specified & fitted by Additive Plus
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
How is this different from the 4L furnace tube?
When does the alumina tube need replacing?
How do I confirm this is the right part?
Place your order, or talk to an engineer first
Order Zetasinter Alumina Tube (previous tubular furnace) direct, or talk to materials engineer