Made to order
Sygnis F-NIS Upgrade Kit to Version D – Cooled Platform −15 °C
Turn the F-NIS 23151 already in your lab into Version D: a cooled build platform from −15 °C to ambient.
- Cooled platform, −15 °C to ambient
- Version D also carries UV 365/405 nm and the 60 °C heated 10 ml head
- Compatibility confirmed by your machine's serial number before the order
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
$4,970
- Cooled build platform that runs from −15 °C to ambient temperature — the defining part of Version D
- Compatibility check against your machine’s version and serial number before the order
- Remote commissioning and operator training with the Additive Plus team and Sygnis
What the Version D upgrade is
Version D of the Sygnis F-NIS 23151 keeps the pneumatic printhead, the heated 10 ml cartridge and the UV 365/405 nm module of Version C and replaces the heated glass bed with a cooled platform that holds from −15 °C up to ambient temperature. The upgrade kit brings an existing F-NIS to that configuration, so you keep your machine, your slicer profiles and your calibrated materials and add the option of printing onto a cold platform.
Specifications
| Fits | Sygnis F-NIS 23151, compatibility confirmed by serial number |
| Platform | cooled, −15 °C to ambient |
| Printhead on Version D | pneumatic, heated 10 ml cartridge to 60 °C; 30/55 ml cartridges |
| UV on Version D | 365 / 405 nm, controlled by the post-processor |
| Operating pressure | up to 4 bar |
| Nozzles | Luer Lock, e.g. 0.11–1.60 mm |
| Work area on Version D | confirmed in writing before the order |
| Installation and training | remote, online |
| Warranty | 12 months |
| Lead time | 2–3 weeks |
F-NIS versions A–E
| A | B | C | D | E | |
| Heads | 1 | 1 | 1 | 1 | 2 |
| Cartridges | 30/55 ml | 30/55 ml | 30/55 + 10 ml | 30/55 + 10 ml | any two of 30/55 or 10 ml |
| Heated cartridge | — | — | to 60 °C | to 60 °C | to 60 °C, each independently |
| UV 365/405 nm | — | ✓ | ✓ | ✓ | ✓, shared at the second head |
| Platform | glass, to 120 °C | glass, to 120 °C | glass, to 120 °C | cooled, −15 °C to ambient | glass, to 120 °C |
From the Sygnis F-NIS version comparison. All versions: pneumatic dosing to 4 bar, Luer Lock nozzles, closed working chamber, Sygnis post-processor for Simplify3D or PrusaSlicer G-code.
Where the kit stops — and what to take instead
On Version D the platform cools; according to the Sygnis comparison it does not heat to 120 °C as the glass bed of Versions A, B, C and E does. If your materials need a hot bed as well, ask us before you order. Version D includes the UV module and the heated 10 ml head; on an A or B machine these come as the UV module and the Heat module, and we confirm what your machine needs before the order. If you do not own an F-NIS yet, order Version D directly on the F-NIS 23151 card. For two materials in one print, look at the upgrade to Version E; for two-component pastes and thermoplastic supports, at the Sygpast.
Availability, payment and delivery
Why buy it through Additive Plus
What usually stops people — and the honest answer
Ready when you are
| Brand | Sygnis |
More from the Sygnis line
A hybrid Direct Ink Writing printer that prints one- and two-component pastes with thermoplastic supports and cures them with UV and IR during the print — for R&D…
One desktop machine for 3D printing, two-material printing, CNC milling and paste extrusion — four toolheads, swapped in about a minute.Single and Dual FFF printing, 235 × 250…
Add UV curing to your Sygnis F-NIS 23151: the UV Module with 365 nm and 405 nm diodes turns a Version A into a Version B, fitted by…
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.Heated…
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.Two pneumatic heads, independent pressure for each cartridgeIndependent…
Transparent luer-lock syringe barrels for the Sygnis F-NIS 23151 silicone & paste 3D printer — the material cartridges you fill, lock in the printhead and print from. Pack…
General-purpose pistons for Sygnis F-NIS syringe barrels: the tapered face spreads the air pressure evenly and the wiper keeps the barrel wall clean.Pack of 20 · $55 (10…
Electropolished stainless dispensing tips for the Sygnis F-NIS 23151 — six color-coded diameters from 0.20 to 1.50 mm, luer-lock, free of silicones and chlorides.Pack of 20 of one…
Teflon-lined 0.25 mm dispensing tips for the Sygnis F-NIS 23151 — the PTFE lining resists clogging with filled and multi-phase pastes.Pack of 20 · $1200.25 mm bore, PTFE-lined…
What our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
What does the Version D upgrade kit do?
How much does it cost?
Will it fit my F-NIS?
What else is on a Version D machine?
Does the platform still heat to 120 °C?
I own a Version A or B. Can I upgrade to D?
What is the lead time and warranty?
How is it installed?
Should I buy a new Version D instead?
How is Version D different from Version E?
Place your order, or talk to an engineer first
Order Sygnis F-NIS Upgrade Kit to Version D – Cooled Platform −15 °C direct, or talk to materials engineer