Made to order
Sygnis F-NIS Upgrade Kit to Version E – Dual Printhead
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.
- Two pneumatic heads, independent pressure for each cartridge
- Independent heating up to 60 °C for each cartridge
- Shared UV 365/405 nm · 120 °C glass platform kept
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
$4,115
- Second pneumatic printhead — two cartridges in one job
- Independent heating (up to 60 °C) and independent pressure control for each cartridge
- UV 365/405 nm shared at the second head
- Compatibility check against your machine’s version and serial number before the order
- Remote commissioning and operator training with the Additive Plus team and Sygnis
What the Version E upgrade is
Version E is the two-head configuration of the Sygnis F-NIS 23151. Next to the heated pneumatic head it carries a second pneumatic head, and each of the two cartridges has its own heating block and its own pressure control, so two materials with different flow behavior can be laid down in one job without taking the part off the platform. The UV module is shared by both heads, and the platform remains the tempered glass bed heated to 120 °C. The kit brings an F-NIS already in your lab to this configuration.
Specifications
| Fits | Sygnis F-NIS 23151, compatibility confirmed by serial number |
| Heads on Version E | 2 pneumatic heads |
| Cartridges | any two of 30/55 ml or 10 ml |
| Cartridge heating | up to 60 °C, independent block for each cartridge |
| Pneumatic control | independent for each cartridge; up to 4 bar |
| UV | 365 / 405 nm, shared at the second head |
| Platform | tempered glass, heated to 120 °C |
| Work field | 230 × 150 × 150 mm |
| Nozzles | Luer Lock, e.g. 0.11–1.60 mm |
| Software | Sygnis post-processor for Simplify3D or PrusaSlicer G-code |
| Installation and training | remote, online |
| Warranty | 12 months |
| Lead time | 2–3 weeks |
F-NIS versions A–E
| A | B | C | D | E | |
| Heads | 1 | 1 | 1 | 1 | 2 |
| Cartridges | 30/55 ml | 30/55 ml | 30/55 + 10 ml | 30/55 + 10 ml | any two of 30/55 or 10 ml |
| Heated cartridge | — | — | to 60 °C | to 60 °C | to 60 °C, each independently |
| UV 365/405 nm | — | ✓ | ✓ | ✓ | ✓, shared at the second head |
| Platform | glass, to 120 °C | glass, to 120 °C | glass, to 120 °C | cooled, −15 °C to ambient | glass, to 120 °C |
From the Sygnis F-NIS version comparison. All versions: pneumatic dosing to 4 bar, Luer Lock nozzles, closed working chamber.
Where the kit stops — and what to take instead
Version E prints two materials side by side or layer on layer; it does not mix them. Each cartridge is a one-component paste or semi-liquid. If you need to print reactive two-component systems mixed at the head, or soft parts that need thermoplastic supports, look at the Sygpast. If you need a cold build platform rather than a second head, see the upgrade to Version D. And if you do not own an F-NIS yet, order Version E directly on the F-NIS 23151 card.
Availability, payment and delivery
Why buy it through Additive Plus
What usually stops people — and the honest answer
Ready when you are
| Brand | Sygnis |
More from the Sygnis line
A hybrid Direct Ink Writing printer that prints one- and two-component pastes with thermoplastic supports and cures them with UV and IR during the print — for R&D…
One desktop machine for 3D printing, two-material printing, CNC milling and paste extrusion — four toolheads, swapped in about a minute.Single and Dual FFF printing, 235 × 250…
Add UV curing to your Sygnis F-NIS 23151: the UV Module with 365 nm and 405 nm diodes turns a Version A into a Version B, fitted by…
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.Heated…
Turn the F-NIS 23151 already in your lab into Version D: a cooled build platform from −15 °C to ambient.Cooled platform, −15 °C to ambientVersion D also carries…
Transparent luer-lock syringe barrels for the Sygnis F-NIS 23151 silicone & paste 3D printer — the material cartridges you fill, lock in the printhead and print from. Pack…
General-purpose pistons for Sygnis F-NIS syringe barrels: the tapered face spreads the air pressure evenly and the wiper keeps the barrel wall clean.Pack of 20 · $55 (10…
Electropolished stainless dispensing tips for the Sygnis F-NIS 23151 — six color-coded diameters from 0.20 to 1.50 mm, luer-lock, free of silicones and chlorides.Pack of 20 of one…
Teflon-lined 0.25 mm dispensing tips for the Sygnis F-NIS 23151 — the PTFE lining resists clogging with filled and multi-phase pastes.Pack of 20 · $1200.25 mm bore, PTFE-lined…
What our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
What does the Version E upgrade kit do?
How much does it cost?
Will it fit my F-NIS?
Which cartridges can I use?
Can Version E mix two components?
Does Version E keep the heated platform?
What is the lead time and warranty?
How is it installed?
Should I buy a new Version E instead?
How is Version E different from Version D?
Place your order, or talk to an engineer first
Order Sygnis F-NIS Upgrade Kit to Version E – Dual Printhead direct, or talk to materials engineer