All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 345–352 of 538 Items

Farsoon Technologies · Metal LPBF

Farsoon FS422M CAMS LPBF Metal 3D Printer – Continuous Production | 16.7×16.7×16.5 in / 425×425×420 mm

The Farsoon FS422M CAMS is a metal LPBF 3D printer with a 16.7×16.7×16.5 in / 425×425×420 mm build envelope, running a single 500 W laser or quad 500 W lasers.

✓ 150 cm³/h — volume build rate
✓ 16.7×16.7×16.5 in / 425×425×420 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×425×420 mm (16.7×16.7×16.5 in)

Prints 316L, AlMgScZr, AlSi10Mg, CuSn10, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS621M LPBF Metal 3D Printer – Four Configurations up to 1.7 m Tall | 24.4×24.4×43.3 in / 620×620×1100 mm

The Farsoon FS621M is a metal LPBF 3D printer with a 24.4×24.4×43.3 in / 620×620×1100 mm build envelope, running four or six lasers at 500 W or 1000 W depending on configuration.

✓ 4 — configurations supplied
✓ 24.4×24.4×43.3 in / 620×620×1100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 620×620×1100 mm (24.4×24.4×43.3 in)

Prints 316L, AlSi10Mg, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS721M LPBF Metal 3D Printer – Up to Eight 1000 W Lasers | 28.3×16.5×16.5 in / 720×420×420 mm

The Farsoon FS721M is a metal LPBF 3D printer with a 28.3×16.5×16.5 in / 720×420×420 mm build envelope, running two or four 500 W lasers, or eight 1000 W lasers.

✓ 8×1000 W — top laser configuration
✓ 28.3×16.5×16.5 in / 720×420×420 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 720×420×420 mm (28.3×16.5×16.5 in)

Prints 316L, AlSi10Mg, HX, IN718, TA15, Ti-6Al-4V, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · SLS

Farsoon FLIGHT® HT1001P Large-Format Fiber SLS 3D Printer – High-Temperature Polymer | 1000×500×450 mm

Large-format, high-temperature fiber-laser SLS system with a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build. Two to four 300 W fiber lasers and a 220 °C chamber run high-performance and glass-filled polymers at production scale, with fully open parameters and a modular build-station architecture. Sold, installed and supported in the US by Additive Plus.

Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
2–4 fiber lasers · 220 °C — high-performance, glass-filled & TPU polymers.
Lead time: configured to order — US install, training & validated profiles from California.

Build 1000×500×450 mm, 39.4×19.7×17.7 in

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.

Farsoon Technologies · SLS

Farsoon HT1001P-2 Large-Format SLS 3D Printer – Dual-CO₂ High-Throughput Polymer | 1000×500×450 mm

Large-format, high-throughput SLS system: dual 100 W CO₂ lasers drive build rates up to 15 L/h across a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build, with a 220 °C chamber for high-performance polymers. Open platform, modular build-station architecture. Sold, installed and supported in the US by Additive Plus.

Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
Dual CO₂ · up to 15 L/h — high-volume production; 220 °C chamber, broad materials.
Lead time: configured to order — US install, training & validated profiles from California.

Build 1000×500×450 mm, 39.4×19.7×17.7 in

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.

3DCeram · CERAMIC SLA

Fused Silica 3D Printing Paste

Print leachable fused-silica investment-casting cores on 3DCeram's Ceramaker laser-SLA platform for complex internal casting geometries.

✓ 40% porosity, excellent leachability — cleanly removed after casting
✓ Very low expansion (0.07% max dilatation to 1500 °C) holds core dimension through the pour
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Fused Silica (SiO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Additive Plus

EOS M280 HIPed Ti64 Build Plate | M280 HIPed Ti64 Build Platform for Metal 3D Printing

The M280 HIPed Ti64 Build Platform is a high-performance titanium build plate produced via HIP (hot isostatic pressing), engineered for EOS M280 systems. Designed for aerospace, medical, and high-value titanium 3D printing, this HIPed platform ensures material homogeneity, thermal stability, and exceptional first-layer precision for critical LPBF applications.

Need a HIPed titanium build platform for a different printer model or custom dimensions? Request a custom quote — we manufacture precision HIPed titanium build plates and additive manufacturing platforms for most metal AM systems.

Other materials available upon request.

Prints Ti-6Al-4V

From $1,450

Get quote

In stock

· 4-5 weeks

Additive Plus

EOS M400 HIPed Ti64 Build Plate | M400 HIPed Ti64 Build Platform

The M400 HIPed Ti64 Build Platform is a high-density titanium build plate manufactured via hot isostatic pressing (HIP) for EOS M400 systems. Engineered for aerospace, medical, and certified industrial LPBF production, this titanium HIPed build platform ensures zero contamination, superior fatigue resistance, and exceptional dimensional stability. Need a HIPed titanium build platform for another printer model or custom dimensions? Request a custom quote — we manufacture precision HIPed titanium build plates for most industrial metal AM systems.

Prints Ti-6Al-4V

Get quote

In stock

· 6-8 weeks

Equipment

Have a CAD? Have a quote in 24h.