Sygnis · DIW / SLE hybrid paste extrusion
Sygnis Sygpast Hybrid DIW 3D Printer – 1K/2K Pastes with Supports
A hybrid Direct Ink Writing printer that prints one- and two-component pastes with thermoplastic supports and cures them with UV and IR during the print — for R&D and production of soft and functional parts.
- 250 × 250 × 250 mm build · platform heated to 120 °C
- SLE1 / SLE2 paste heads + FFF support head to 280 °C
- UV 365 / 405 nm and IR curing · profilometer and IR camera
- Built on demand, 12–14 weeks · remote commissioning and training · 12-month warranty
Build 9.8×9.8×9.8 in / 250×250×250 mm
Prints Ceramics, Conductive / battery materials, Pastes & gels, Polyurethanes (1K & 2K), Silicones
Made to order
· Ships in 12–14 weeks — built to order
3DCeram · CERAMIC SLA
3DCeram C1000 FLEXMATIC Industrial Ceramic SLA 3D Printer – Serial Production | 320×320×200 mm
Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.
- 320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
- 7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
- Lead time: configured to order — install, training & debind/sinter support from California.
Build 12.6×12.6×7.9 in / 320×320×200 mm
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
3DCeram · CERAMIC SLA
3DCeram C101 EASY LAB Ceramic SLA 3D Printer – Lab & Material Development | 100×100×150 mm
Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Open parameters — qualify new ceramics & formulations, not just vendor recipes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Build 3.9×3.9×5.9 in / 100×100×150 mm
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
3DCeram · Multi-material Ceramic SLA
3DCeram C900 HYBRID Multi-Material Ceramic SLA 3D Printer – Up to 4 Materials | 300×300×100 mm
Production-scale multi-material ceramic SLA system: alongside the base ceramic it deposits up to three additional materials in one part, via dispensers from needle valve to micro-distribution, all in CPS 2.0. On an 11.8×11.8×3.9 in / 300×300×100 mm platform with a fine 35 µm UV laser. Full print → debind → co-sinter workflow supported by Additive Plus.
- Up to 4 materials in one part — base ceramic + 3 dispensed materials.
- Fine 35 µm UV laser — 355 nm, detail across the 300×300 mm platform.
- Lead time: configured to order — material-set & co-sinter support from California.
Build 11.8×11.8×3.9 in / 300×300×100 mm
Prints ATZ, Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Tricalcium Phosphate, Zirconia 8Y
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
