Made to order
- Install & operator training SYGPRINT slicer setup, on-site
- Material parameter support for your pastes and inks
Sygnis Sygpast Hybrid DIW 3D Printer – 1K/2K Pastes with Supports
A hybrid Direct Ink Writing printer that prints one- and two-component pastes with thermoplastic supports and cures them with UV and IR during the print — for R&D and production of soft and functional parts.
- 250 × 250 × 250 mm build · platform heated to 120 °C
- SLE1 / SLE2 paste heads + FFF support head to 280 °C
- UV 365 / 405 nm and IR curing · profilometer and IR camera
- Built on demand, 12–14 weeks · remote commissioning and training · 12-month warranty
$84,885
What your R&D engineer actually checks
Print soft materials that actually hold shape
In-line UV 365/405 nm and IR curing set silicones, polyurethanes and ceramics during the print, while thermoplastic supports hold overhangs — complex soft geometries come off the bed ready, not slumped.
A materials engineer on the line
Factory-trained engineers, not a ticket queue. Parameter development for new pastes, silicones and ceramics, and troubleshooting in under 24h. NDA standard.
- SYGPAST hybrid printer, 250 × 250 × 250 mm build, platform heated to 120 °C
- SLE liquid printhead modules: SLE1 for one-component and SLE2 for two-component materials
- FFF head for thermoplastic supports, heated to 280 °C
- Curing during the print: UV 365 nm, UV 405 nm and IR
- Profilometer and IR camera with Sygnis quality-control algorithms
- SYGPRINT slicer with The Hull automatic supports
What the SYGPAST is
The SYGPAST is a professional Direct Ink Writing printer made by Sygnis S.A. in Poland under its DIW3D line. It combines two technologies in one process: an SLE printhead extrudes a semi-liquid material — one-component with the SLE1 module, two-component with SLE2 — while an FFF head prints thermoplastic support structures around it. That support is what lets soft, wet material hold an overhang or a cavity until it has set.
Curing happens on the machine. UV light at 365 nm and 405 nm and an IR source cure or heat the material mid-print, so a part is usable when the print ends. A profilometer and an IR camera watch the build, with Sygnis’s own quality-control algorithms. Sygnis wrote its own slicer for the process, SYGPRINT, because the combination of SLE, FFF and three exposure options needs one program to plan all of it; SYGPRINT also generates The Hull, Sygnis’s automatic support for complex semi-liquid objects. The print parameters stay open, so research teams can test their own materials and admixtures in the final shape rather than in a fixed process. Sygnis states that a SYGPAST is running in a live installation in Qatar.
Specifications
| Manufacturer | Sygnis S.A., Gdańsk, Poland (DIW3D) |
| Technology | Hybrid Direct Ink Writing: SLE liquid extrusion + FFF supports |
| Printheads | 2 — one interchangeable SLE printhead and one FFF head |
| SLE modules | SLE1 one-component · SLE2 two-component |
| Build volume | 250 × 250 × 250 mm (9.8 × 9.8 × 9.8 in) |
| Platform | heated, up to 120 °C |
| Print material | any one- or two-component paste or semi-liquid material |
| Support material | thermoplastic filament, FFF head up to 280 °C |
| Curing module | UV 365 nm, UV 405 nm, IR |
| Quality control | profilometer and IR camera with proprietary algorithms |
| Software | SYGPRINT dedicated slicer · The Hull automatic supports |
| Shipping crate | wooden, approx. 120 × 80 × 95 cm (47 × 31 × 37 in), approx. 150 kg (330 lb) — Sygnis estimate |
| Footprint, power, resolution | not in the published specification; Sygnis confirms them for your order |
| Price | $84,885, delivered in the US (DDP) |
| Warranty | 12 months (Sygnis) |
| Installation and training | remote — online commissioning and operator training; on-site installation available on request |
| Lead time | 12–14 weeks, built on demand |
Where Sygnis sees it used
Sygnis built the SYGPAST for research and for production. These are the uses it names:
| Space | demanding satellite components |
| Aerospace | fine turbine tooling |
| Energy | specialized seals |
| Chemical and materials labs | validating newly made materials in a final shape, and printing fixtures for research |
| Production lines | adapters, fixtures and safety devices when a line is re-tooled for new operating conditions |
What the materials have in common: they are pastes or semi-liquids that flow, need support while wet and set by light, heat or reaction. Silicones and ceramic pastes are typical; two-component systems that react after mixing need the SLE2 module.
Three technologies in one print
SYGPAST or F-NIS 23151?
| Feature | SYGPAST | F-NIS 23151 |
| Build volume | 250 × 250 × 250 mm | 230 × 150 × 150 mm |
| Materials | one- and two-component pastes | one-component pastes |
| Supports | thermoplastic, from a second head | none |
| Curing during the print | UV 365 / 405 nm and IR | UV 365 / 405 nm, Versions B–E |
| Quality control | profilometer and IR camera | — |
| Software | SYGPRINT slicer | post-processor for common slicers |
| Price | $84,885 | from $11,210 |
| Lead time | 12–14 weeks | 2–3 weeks |
Where the SYGPAST stops — and what to take instead
The SYGPAST is a capital machine built on demand: $84,885 and 12–14 weeks. If your work is one-component pastes on a desk-sized part and you do not need supports, two-component printing or in-print IR, the Sygnis F-NIS 23151 does that from $11,210 and ships in 2–3 weeks. For filament printing, CNC milling and thick-paste extrusion on one machine, look at the Zmorph FAB 4in1, now produced by the Sygnis Group. Sygnis does not publish the footprint, electrical supply, viscosity range or resolution of the SYGPAST; we get those figures from Sygnis for your site before you order. The crate is about 120 × 80 × 95 cm and 150 kg, so plan for a pallet jack or forklift at receiving. Sygnis does not sell printing materials: you print your own or third-party pastes, and ceramic green parts still need your own debinding and sintering.
In pictures
Availability, payment and delivery
Why buy it through Additive Plus
What usually stops people — and the honest answer
Ready when you are
| Brand | Sygnis |
| Technology | DIW / SLE hybrid paste extrusion |
| Build Volume | 9.8×9.8×9.8 in / 250×250×250 mm |
| No. of printing heads | 2 (SLE liquid + FFF support) |
| Bed Temperature | heated platform to 120 °C |
| Material | Ceramics, Conductive / battery materials, Pastes & gels, Polyurethanes (1K & 2K), Silicones |
| Country of origin | Poland |
Other products teams run alongside Sygnis Sygpast Hybrid DIW 3D Printer – 1K/2K Pastes with Supports
Large-format, high-temperature fiber-laser SLS system with a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build. Two to four 300 W fiber lasers and a 220 °C chamber run high-performance and glass-filled polymers at production scale, with fully open parameters and a modular build-station architecture. Sold, installed and supported in the US by Additive Plus.
- Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
- 2–4 fiber lasers · 220 °C — high-performance, glass-filled & TPU polymers.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
Large-format industrial SLA. Marble frame. Vacuum recoating. A fast, reliable platform for automotive patterns, one-piece molds, footwear lasts and architectural forms — without stitching or Z-seam artifacts.
- ✓ 31×31×20 in / 800×800×500 mm build chamber — a fascia pattern or a batch of shoe lasts in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
Mid-format industrial SLA. Marble frame. Vacuum recoating. Built for high-volume printing of footwear lasts, dental arch batches, engineering prototypes and patterns — without stitching or Z-seam artifacts.
- ✓ 26×26×16 in / 650×650×400 mm build chamber — nests a full tray of lasts or arches per run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for shoe molds, automotive patterns, dental models, and architectural forms — without stitching or Z-seam artifacts.
- ✓ 450 × 450 × 350 mm build chamber — fits a standard shoe last or full fascia panel in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.08–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame (720 kg) — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
Metal & technical ceramics, printed by extrusion — even silicon carbide.
- FFF · pellet · paste + 3-axis CNC in one machine
- No laser, no loose powder — lab-safe, single-phase
- Official 3DCeram US representative · 12-mo warranty
From $63,000 · Core: FFF + CNC (add Pellet/Paste heads) · made to order, ~3-month build · leasing available
Request a quote Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
In stock
The Axtra3D Revox X1 is a production-grade 4K DLP resin 3D printer — the same chassis and TruLayer separation as the flagship Lumia X1, at an entry price point for teams that can work within DLP part quality on a 9.8×5.5×19.5 in / 249×140×495 mm build volume.
- ✔ Production 4K DLP at 405 nm — 65 µm XY resolution
- ✔ TruLayer separation runs large cross-sections and filled, viscous resins
- ✔ Open or closed 405 nm material configurations
- ✔ Lead time: configured to order — request a quote for delivery & installation
Made to order
· Lead time: configured to order — request a quote for delivery and installation.
The Farsoon FS191M is a metal LPBF 3D printer with a ø7.5×7.8 in / ø191×199 mm build envelope, running a single 500 W fiber laser.
- ✓ ø7.5×7.8 in — build cylinder
- ✓ ø7.5×7.8 in / ø191×199 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Made to order
· Built to orderWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is the Sygnis SYGPAST?
How much does the SYGPAST cost?
What is the lead time?
What does the SYGPAST include?
Is installation and training included?
What materials can the SYGPAST print?
What makes it a hybrid printer?
How do the curing and quality control work?
How does the SYGPAST compare with the Sygnis F-NIS 23151?
What are the footprint, weight and power requirements?
What is the warranty?
Where is the SYGPAST used?
Can you print a test part from our material first?
Place your order, or talk to an engineer first
Order Sygnis Sygpast Hybrid DIW 3D Printer – 1K/2K Pastes with Supports direct, or talk to materials engineer