| Additive Plus

Application

Browse additive manufacturing materials by application — engineering, manufacturing, medical, dental, jigs and fixtures, and composite tooling. Each group gathers the polymers, resins, composites, and metals qualified for that use, so you can move from your application straight to the right feedstock.

106 products From $20

Showing 73–80 of 106 Application

Sygnis · DIW

Printing Ceramic Pastes on the Sygnis F-NIS and Sygpast – DIW Guide

Print your own ceramic paste — the Sygnis F-NIS 23151 and Sygpast are open DIW platforms for alumina, zirconia, SiC and other pastes you formulate or buy.

Al₂O₃, YSZ, ZrO₂, SiC, aluminosilicate, TiO₂ and zeolite pastes
Pneumatic extrusion up to 4 bar, Luer Lock nozzles 0.10–1.50 mm
Print seals and insulation straight onto a component
You source the paste and fire the green parts in your own furnace

Choose your F-NIS →

Prints Alumina (Al2O3), Titania (TiO2), Silicon Carbide (SiC), Zirconia (ZrO2)

Get quote

Made to order

· Free DIW guide · not sold as a material

Sygnis · DIW

Printing Silicones on the Sygnis F-NIS and Sygpast – DIW Guide

Print your own silicone — the Sygnis F-NIS 23151 and Sygpast are open DIW platforms for one- and two-component silicones you formulate or buy.

One-component, moisture-curing and UV-curing silicones on the F-NIS
UV 365/405 nm, 60 °C heated cartridge, cooled platform or two heads by version
Two-component silicones and supported soft parts on the Sygpast
K2 silicone in the box for calibration · you source the production material

Choose your F-NIS →

Get quote

In stock

· Free DIW guide · not sold as a material

3DCeram · CERAMIC SLA

Tricalcium Phosphate 3D Printing Paste

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Tricalcium Phosphate (TCP)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Nexa3D · LSPc, DLP, XiP

Nexa3D xMOLD Dissolvable Freeform Injection Molding Resin – LSPc for XiP | 5 kg

xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.

✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
✓ Compatible with thousands of commercial injection materials, including reinforced grades
✓ Fully dissolvable — undercuts and internal features release without side actions
✓ Genuine Nexa3D · 5 kg · in stock — ships in 5–15 business days

Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →

From $2,495

Add to cart

In stock

· 5–15 Business Days

3DCeram · CERAMIC SLA

Zirconia 3Y 3D Printing Paste

Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.

✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 8Y 3D Printing Paste

Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.

✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

CreatBot

CreatBot ABS Filament - 1kg

ABS engineering filament for FDM 3D printing — high impact strength, 78°C HDT (0.45 MPa, ISO 75), and a validated CreatBot F430 print profile for functional prototypes and production tooling.

✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
✓ Validated print profile + datasheet included
✓ In stock, ships in 1–2 business days

From $20

Add to cart

In stock

· 1–2 Business Days

CreatBot

CreatBot ASA Filament - 1kg

ASA filament for FDM 3D printing — ABS-grade strength with the UV, weather, and color stability sunlight doesn't fade, plus a 90°C HDT for outdoor housings, automotive exterior parts, and signage.

✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
✓ Validated CreatBot F430 print profile + datasheet included
✓ In stock, ships in 1–2 business days

From $30

Add to cart

In stock

Application

Not sure which material?

Browse other material types

Have a CAD? Have a quote in 24h.