Made to order
3DVerkstan Olsson Ruby 0.8 mm Nozzle for 1.75 mm Filament – Wear-Resistant Abrasive Nozzle
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
$90
Built for abrasive materials
Ruby tip, brass body
The 0.8 mm orifice is synthetic ruby — hard enough for carbon fiber, glass fiber, steel-fill, and even boron carbide — set in a brass body that conducts heat for high throughput. One nozzle handles both standard and abrasive filaments.
A materials engineer on the line
Choosing a nozzle diameter or dialing in an abrasive composite? Our engineers run these materials — sub-4h reply, NDA standard.
Compatibility & Specifications
The 3DVerkstan Olsson Ruby is a 0.8 mm hardened nozzle for 1.75 mm filament, with a synthetic-ruby orifice set in a brass body. The ruby tip resists abrasion from filled and composite filaments, while the brass body keeps heat conductivity — and throughput — high. It uses the standard M6 nozzle thread, so it fits hotends built around the E3D V6 / Olsson geometry, including the Ultimaker 2 / 2+ (via the Olsson block) and V6-based printers. The 0.8 mm orifice suits faster printing and higher extrusion flow.
Built for Abrasive Materials
The ruby orifice was originally developed for printing boron carbide (B4C), one of the hardest known materials. In practice it prints PLA, ABS, CPE/PET and nylon, plus abrasive composites filled with carbon fiber, glass fiber, steel, wood, tungsten, and phosphorescent pigment — where a standard brass nozzle would wear open in hours. One nozzle covers both standard and abrasive jobs.
Why Source Through Additive Plus
Genuine 3DVerkstan Olsson Ruby, supported by a team that runs these materials. This is a made-to-order item — typically 1–2 weeks — and every order ships with a response in under 24 hours.
| Brand | 3DVerkstan |
Other products teams run alongside 3DVerkstan Olsson Ruby 0.8 mm Nozzle for 1.75 mm Filament – Wear-Resistant Abrasive Nozzle
September special: $448 (regular $527.40) — valid through September 30, 2026. Wash and cure station for post-processing parts printed on the Nexa3D XiP. Ordered on demand — availability and lead time are confirmed at order. This SKU is being discontinued by the supplier, so the offer runs while supplier stock lasts.
Made to order
Elongated conical polyethylene dispensing tips for medium- and high-viscosity fluids and pastes — the most versatile nozzle for initial material tests, color-coded by diameter for fast changeovers.
- ✓ Conical PE tips with UV-light-blocking additive, 31.75 mm length
- ✓ Color-coded by inner diameter · sold in multi-packs (see selected option)
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.
- ✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
- ✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
- ✓ Feeds filament straight into the printer while sealed
Made to order
· Currently on backorder — contact us for lead time
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
Replacement tool kit for the Nexa3D NX Pro, NXD and NXE printers — the hand tools Nexa3D supplies for operating and maintaining the machine, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D hand-tool set for NX Pro / NXD / NXE
- ✓ For part removal and routine maintenance
- ✓ Genuine Nexa3D kit (P/N 11083) · ships in 2 business days
In stock
· 2 Business Days
QATM QPREP Solution Boxes bundle every grinding and polishing consumable needed to prepare a specific material for metallographic analysis — an evaluated step-by-step preparation guide plus grinding disc, grinding paper, diamond suspension and polishing cloth in one box.
- ✓ Complete, evaluated prep recipe for one material — guide + all media
- ✓ 11 material-specific boxes · media for Ø250 mm and Ø300 mm systems
- ✓ Ideal for unknown specimens and labs new to preparation
In stock
· Contact for lead time
A physical sample kit of parts printed on Nexa3D's ultrafast LSPc resin printers — twelve materials in one box, so your team can judge real surface finish, detail and material behaviour before committing to a resin.
- ✓ 12 printed sample parts across the Nexa3D resin range
- ✓ Model, engineering, flexible, ceramic-filled, flame-retardant and high-temp resins
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facilityCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers is the Olsson Ruby 0.8 mm compatible with?
What materials can it print?
Why choose a ruby nozzle over hardened steel?
Place your order, or talk to an engineer first
Order 3DVerkstan Olsson Ruby 0.8 mm Nozzle for 1.75 mm Filament – Wear-Resistant Abrasive Nozzle direct, or talk to materials engineer