In stock
- Material certification included
- Mutual NDA before any file or spec review
EOS M400 Ti-6Al-4V Build Plate | M400 Ti64 Build Platform for Metal 3D Printing
Need a titanium build platform for a different printer model or custom dimensions? Request a custom quote — we manufacture precision titanium build plates and additive manufacturing platforms for most metal AM systems.
What your process engineer actually checks
Flat, stable, and ready for production
Every build plate is manufactured from certified material, precision-machined, and inspected before shipment. Critical dimensions, flatness, thickness, and mounting features are verified to ensure reliable installation and repeatable print results.
Machine-ready compatibility
Build plates are available for EOS, Renishaw, SLM Solutions, Nikon, Trumpf, Additive Industries, and other metal AM platforms. Need a custom mounting pattern or proprietary format? We can manufacture to your drawing.
The EOS M400 Ti64 Build Plate is a precision-machined Ti-6Al-4V titanium platform for EOS M400 laser powder bed fusion (LPBF) systems. Its 360×400×73.66 mm (14.17×15.75×2.9 in) profile is stress-relieved and ground flat for repeatable first-layer adhesion, and it ships in two build speeds — Express in 2–3 weeks or Standard in 6–8 weeks — from our California shop. From $4,750.
Why production teams choose this plate
Spec-backed reasons to run a machined, inspected plate over raw stock or a worn platform.
Dedicated titanium platform
Keeping Ti-6Al-4V on a matched titanium plate avoids iron pickup into the melt pool and keeps material certification clean for reactive-metal builds.
Ground flat for consistent first layers
CNC-machined and precision-ground to a tight flatness tolerance so the first fused layer bonds evenly across the full platform — fewer recoater collisions, fewer failed builds.
Substantial profile, more regrind life
A thick starting plate leaves more material to face off and re-flatten after each build cycle before it is retired — more usable life than a thin, single-use plate.
Machined to EOS M400 spec
Each plate is CNC-machined to the EOS M400 clamping and recoater mounting pattern, so it drops into your machine without field-lapping.
How we get it to your build chamber
Every plate ships as a finished, inspected platform — not raw stock.
Machine to spec
Each plate is CNC-machined from certified Ti-6Al-4V titanium stock to the EOS M400 clamping and recoater pattern.
Stress-relieve & grind
Every plate is stress-relieved, then precision-ground to a flatness tolerance before it ships — no field-lapping required on install.
Inspect & ship
Flatness is checked on the finished plate. Choose your speed at checkout — Express in 2–3 weeks, or Standard in 6–8 weeks at lower cost.
Typical applications
Where production teams run this plate.
Specifications
Full dimensions and attributes for this plate.
| Material | Ti-6Al-4V (Grade 5) |
| Plate thickness | 2.9 in / 73.66 mm |
| Platform size | 14.17×15.75 in / 360×400 mm |
| Compatible systems | EOS M400 |
| Country of origin | USA |
| Lead time | 2–3 wks (Express) or 6–8 wks (Standard) |
Related build plates
Same machine in another alloy, or this alloy on another platform.
| Brand | Additive Plus |
| Country of origin | USA |
| Material | Ti-6Al-4V |
| Platform | M400 |
| Delivery speed | Express (2–3 weeks), Standard (6–8 weeks) |
| Package | 1 plate, 10 plates, 5 plates, 50 plates |
| Dimensions | 14.173×15.748×2.9 in, 360×400×73.66 mm |
We manufacture custom build plates.
Custom dimensions, mounting holes, threaded features, alignment pins, edge chamfers, engraved identification, or special surface requirements. Production-ready custom plates delivered in as little as 2–3 weeks.
Complete the workflow
Lightweight. High-purity. Biocompatible. Genuine Amaero Ti64 Grade 23 (ELI) titanium for LPBF, EBM & DED metal 3D printing.
- ✓ Extra-low-interstitial — higher ductility & fracture toughness
- ✓ Gas-atomized (EIGA), full COA + PSD report on every lot (15–53 µm, 10 kg)
- ✓ Sold in small, workable volumes · in US stock, ready to ship
A-Powder Ti-6Al-4V Grade 23 ELI — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
Immersion-separation industrial vacuum for reactive metal powder — aluminium, titanium and similar alloys — in 3D printing and powder handling. Captures powder under liquid so it's never a dry, ignition-sensitive cloud. ATEX-rated, antistatic, single-phase.
- ✓ For reactive AM powder (Al, Ti, Mg) — the safe alternative to a dry vacuum
- ✓ Two-stage antistatic filtration + grounded construction · ATEX docs on request
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
Hose and tools are not part of the standard configuration. The Delfin KT1006 accessory kit ($721) fits this 2-inch inlet: 10 ft hose, wand, floor brush and nozzle.
The Farsoon FS350M is a multi-laser LPBF metal 3D printer for medium- to high-volume series production, supplied in 4×500 W, 4×1000 W or 6×500 W laser configurations on the same 17.1×14.1×15.7 in / 433×358×400 mm build cylinder.
- ✓ Three laser configurations — we supply and support all three
- ✓ 17.1×14.1×15.7 in / 433×358×400 mm build on a 65 sq ft / 6 m² class footprint
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Other products teams run alongside EOS M400 Ti-6Al-4V Build Plate | M400 Ti64 Build Platform for Metal 3D Printing
xPRO410 is a rigid, general-purpose LSPc photopolymer built on Henkel Loctite® PRO410 chemistry — extreme accuracy and an exceptional surface finish, optimized for the Nexa3D NXE 400 at up to 8 L/hour.
- ✓ Rigid general-purpose resin — 41 MPa tensile, Shore D 79
- ✓ Dimensional accuracy within 0.2% after xCURE post-cure
- ✓ 5 kg container for NXE 400 / 400Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
Printable liquid silicone for Direct Ink Writing (DIW) — low viscosity for clean extrusion and low-temperature curing, in a tunable 20–80 Shore A hardness range for flexible, durable printed parts.
- ✓ 20–80 Shore A · service range −50 °C to 200 °C
- ✓ Low viscosity, low-temperature cure · bonds to metal, glass, ceramic, plastic
- ✓ For DIW / paste-extrusion printing · priced per configuration
In stock
· Priced and shipped per configuration — hardness grade, pack size and lead time confirmed at quote.
Low-viscosity ESD resin with real toughness for final-part production — dissipative volume resistivity (5.5 × 10⁷ Ω·cm) plus 65 MPa strength and HDT-B 94 °C.
- ✓ ESD-dissipative — volume resistivity 5.5 × 10⁷ Ω·cm for static-safe parts
- ✓ Tough & strong — 65 MPa tensile, 2700 MPa modulus, 86 Shore D
- ✓ HDT-B 94 °C, excellent chemical resistance; easy low-viscosity processing
- ✓ A similar option to Loctite IND3380 ESD
Made to order
· Ships in <10 business days
In stock
· 2 Business Days
PP-like black resin: high elongation/impact for end-use jigs, housings & parts.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
In stock
In stock
· 1–2 Business Days
Low-viscosity, semi-translucent laser-SLA resin with a 135 °C glass transition — built for prototypes and quick molds that must hold their shape under heat.
- ✓ Tg 135 °C · 87 Shore D · 65 MPa tensile · 110 MPa flexural
- ✓ 340 cps low-viscosity · 0.08–0.12 mm layers on Kings industrial SLA (355 nm)
- ✓ In stock — ships in 1–2 business days from our Los Angeles warehouse
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
A-Powder 316L — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
Made to order
· Ship date confirmed after you orderCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
How does the M400 Ti64 Build Platform maintain material purity for titanium LPBF printing?
Can the M400 Ti64 Build Platform be used as a direct replacement EOS M400 build plate?
How does the 76.2mm thickness of the titanium build platform affect thermal stress?
Is the M400 Ti64 Build Platform suitable for batch production of titanium components?
How does the titanium build platform prevent cross-contamination?
Can the titanium building platform be resurfaced?
What industries benefit from the M400 Ti64 Build Platform?
Can custom titanium build platforms be made for other printer models?
Place your order, or talk to an engineer first
Order EOS M400 Ti-6Al-4V Build Plate | M400 Ti64 Build Platform for Metal 3D Printing direct, or talk to materials engineer