In stock
Nexa3D Threaded-Stud Rubber Bumper with Steel Base Plate for XiP – OEM Spare | P/N 52269-01
OEM threaded-stud rubber bumper with a steel base plate for the Nexa3D XiP desktop resin 3D printer — the genuine vibration-damping foot that supports and stabilises the machine, supplied to Nexa3D part number 52269-01 (Rev A).
- ✓ Genuine Nexa3D spare · P/N 52269-01-RevA
- ✓ Threaded-stud mount · steel base plate · rubber damping
- ✓ For the Nexa3D XiP · in US stock · ships in 2 business days
$20
Looking for Nexa3D resins? They are discontinued. See current replacements →
Compatibility & Specifications
The threaded-stud rubber bumper with steel base plate is the genuine Nexa3D replacement support foot for the Nexa3D XiP desktop resin 3D printer. The rubber body damps vibration while the bonded steel base plate and threaded stud give a secure mounting point, helping keep the printer stable and level during operation. It is supplied to Nexa3D part number 52269-01 (revision A).
- Part number: 52269-01-RevA
- Type: Threaded-stud rubber bumper / anti-vibration foot with steel base plate
- Compatibility: Nexa3D XiP desktop resin 3D printer
- Brand: Nexa3D (OEM)
Why Source Through Additive Plus
Additive Plus stocks genuine Nexa3D spare parts in US inventory and ships in two business days — no overseas lead time on a simple wear part. We support the Nexa3D systems we sell. Ordering for a department or need a purchase order? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | XiP |
Other products teams run alongside Nexa3D Threaded-Stud Rubber Bumper with Steel Base Plate for XiP – OEM Spare | P/N 52269-01
The genuine Nexa3D Everlast-2 membrane keeps your XiP producing clean, consistent parts — print after print.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — second-generation interface for sharp feature definition
- ✔ Ships from our Los Angeles warehouse in 5–15 business days
Order a spare today — a worn membrane shouldn’t cost you a print day.
In stock
· 5–15 Business Days
OEM-grade LCD interface DisplayPort board for Nexa3D NX 3D printers — genuine light-engine interface board (part 32032-01), in US stock and ships in 2 business days.
- ✓ Routes the DisplayPort signal to the LE5 light-engine LCD — Nexa3D part 32032-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
OEM-grade industrial control computer for Nexa3D NX-platform 3D printers — genuine embedded controller PC (part 50294-01), in US stock and ships in 2 business days.
- ✓ Embedded controller PC for NX-platform printers — Nexa3D part 50294-01
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D replacement resin vat container for the XiP desktop resin 3D printer — the rigid outer tray that holds the Everlast membrane and resin during printing. In stock at our US facility, ships in 2 business days.
- ✓ Outer vat container / tray for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part — pairs with the XiP Everlast membrane
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D 160 W external power supply for the XiP platform — regulated 24 V DC output through a 4-pin DIN connector.
- ✓ OEM Nexa3D P/N 52040-01 Rev A — XiP platform
- ✓ 160 W · 24 V DC output · 4-pin DIN connector
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at OrderWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer does this bumper fit?
What does the bumper do?
Is it a genuine Nexa3D part?
Place your order, or talk to an engineer first
Order Nexa3D Threaded-Stud Rubber Bumper with Steel Base Plate for XiP – OEM Spare | P/N 52269-01 direct, or talk to materials engineer