Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
Hardware Maintenance
Nexa3D xWASH Power Entry Module – Mains Inlet for xWASH Parts Washer | P/N 92008-01
Genuine Nexa3D power entry module (P/N 92008-01 Rev A) for the xWASH automated parts washer — the filtered mains inlet where the power cord connects.
- ✓ OEM Nexa3D P/N 92008-01 Rev A — xWASH parts washer
- ✓ Filtered IEC mains inlet · integrates line fuse · direct replacement
- ✓ In stock — ships in 2 business days from US inventory
$115
Price held 7 days after order.
Genuine parts, no overseas wait
The exact xWASH mains inlet
The power entry module (P/N 92008-01) is the genuine Nexa3D mains inlet for the xWASH parts washer — a filtered IEC socket with an integrated line fuse, so it drops in as a direct replacement with no rewiring.
An applications engineer on the line
Not sure which xWASH electrical part failed? Our engineers support the Nexa3D systems we sell — sub-4h reply, NDA standard.
About this product
Compatibility & Specifications
This power entry module (P/N 92008-01 Rev A) is the genuine Nexa3D mains inlet for the xWASH automated parts washer. It is the filtered IEC socket where the power cord connects and mains power enters the wash station, integrating the line fuse. Fit it as a direct replacement for a damaged inlet, a loose or scorched connector, or a blown line fuse — no substitute wiring required.
Why Source Through Additive Plus
Genuine Nexa3D hardware, stocked and supported in the US for the machines we sell. Ships in 2 business days — no overseas lead time on maintenance parts — with a response in under 24 hours.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | xWASH |
Other products teams run alongside Nexa3D xWASH Power Entry Module – Mains Inlet for xWASH Parts Washer | P/N 92008-01
Hardware Maintenance
Nexa3D Dual-Output Power Supply for NX-Platform 3D Printers – 12 V/150 W + 24 V/150 W | P/N 50149-01
OEM-grade dual-output power supply for Nexa3D NX-platform 3D printers — 12 V/150 W and 24 V/150 W modules in one unit (part 50149-01), in US stock and ships in 2 business days.
- ✓ Two regulated rails: 12 V / 150 W and 24 V / 150 W — Nexa3D part 50149-01
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $784
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D LE Blower Service Kit (1 Fan) for NXE Light Engine – P/N 11179-01
OEM-grade LE blower service kit (1 fan) for Nexa3D NX 3D printers — genuine light-engine cooling blower kit (part 11179-01), in US stock and ships in 2 business days.
- ✓ Single-fan cooling blower for the light engine — Nexa3D part 11179-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $29
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Camera Assembly for NXE 400 / 400Pro – Build Monitoring Camera | 11095-01 Rev A
OEM-grade camera assembly for Nexa3D NXE 400 and NXE 400Pro industrial resin printers — the in-chamber build monitoring camera, genuine part 11095-01 Rev A.
- ✓ Genuine Nexa3D 11095-01 — complete camera assembly
- ✓ Restores remote build monitoring
- ✓ In stock — ships in 2 business days from US inventory
From $176
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Industrial Control Computer for NX-Platform 3D Printers – P/N 50294-01
OEM-grade industrial control computer for Nexa3D NX-platform 3D printers — genuine embedded controller PC (part 50294-01), in US stock and ships in 2 business days.
- ✓ Embedded controller PC for NX-platform printers — Nexa3D part 50294-01
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $2107
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D DPDT Relay, 8 A / 12 V, for NX-Platform Resin 3D Printers – P/N 50382-01
Genuine Nexa3D DPDT relay rated 8 A at 12 V (P/N 50382-01) — a switching relay used in the electronics of NX-platform resin 3D printers. In stock at our US facility, ships in 2 business days.
- ✓ DPDT relay, 8 A / 12 V — genuine Nexa3D service part
- ✓ For Nexa3D NX-platform printer electronics, P/N 50382-01
- ✓ In US stock · ships in 2 business days
From $29
Add to cart
In stock
· 2 Business Days — in stock at our US facility
Hardware Maintenance
Nexa3D Sensors PCB for NX-Platform Resin 3D Printers – P/N 30059-01
Genuine Nexa3D Sensors PCB (P/N 30059-01) — the sensor interface board used in NX-platform resin 3D printers. In stock at our US facility, ships in 2 business days.
- ✓ Sensor interface board for Nexa3D NX-platform printers
- ✓ Genuine Nexa3D service part, P/N 30059-01
- ✓ In US stock · ships in 2 business days
From $540
Add to cart
In stock
· 2 Business Days — in stock at our US facility
Hardware Maintenance
Nexa3D xWASH Arms for XiP Pro & NXE Build Plates – Wash Station Suspension Arms
Genuine Nexa3D xWASH suspension arms — hold the XiP Pro build plate and NXE build plates in the xWASH tank through the wash cycle.
- ✓ OEM Nexa3D part (xWASH_XiPPro_ARM_KIT) — fits the xWASH parts washer
- ✓ Compatible with the XiP Pro build plate and NXE build plates
- ✓ In stock — ships in 2 business days from US inventory
From $215
Add to cart
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machine is this power entry module for?
The power entry module (P/N 92008-01 Rev A) is a genuine Nexa3D part for the xWASH automated parts washer. It is the mains inlet on the wash station and installs as a direct replacement for the original module.
What does the power entry module do?
It is the filtered IEC inlet where the power cord plugs into the xWASH and mains power enters the wash station. It carries the line fuse, so a blown fuse or a damaged inlet is a common reason to replace this module rather than the whole electrical assembly.
Is it an OEM part and how fast does it ship?
It is a genuine Nexa3D OEM power entry module for the xWASH parts washer. It is in stock at our US facility and ships within 2 business days; contact us for multiple units or a purchase order.
Place your order, or talk to an engineer first
Order Nexa3D xWASH Power Entry Module – Mains Inlet for xWASH Parts Washer | P/N 92008-01 direct, or talk to materials engineer