In stock
Nexa3D Material Changeover Kit for NXD – P/N 11276
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
$169
Switching resins on an automated system is only clean if you change the parts that touch the material. This kit supplies the consumables the NXD needs for a proper material changeover, so traces of the previous resin do not carry into the next one and each material keeps performing to spec.
Compatibility & Specifications
- Type: material changeover consumable kit
- Function: clean switch between resins on the automated resin system
- Compatible machine: Nexa3D NXD
- Part number: 11276 (genuine Nexa3D kit)
- Use: one kit per material changeover
Why Source Through Additive Plus
Genuine Nexa3D consumables, stocked in the US and shipped in about two business days. If you run several materials, keeping a few kits on hand means a resin switch never waits on a parts order. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NXD, NXE |
Other products teams run alongside Nexa3D Material Changeover Kit for NXD – P/N 11276
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
Replacement tool kit for the Nexa3D NX Pro, NXD and NXE printers — the hand tools Nexa3D supplies for operating and maintaining the machine, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D hand-tool set for NX Pro / NXD / NXE
- ✓ For part removal and routine maintenance
- ✓ Genuine Nexa3D kit (P/N 11083) · ships in 2 business days
In stock
· 2 Business Days
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement activated-carbon air filters for the Nexa3D XiP Pro. They capture resin odour and VOCs from the printer's airflow, keeping the enclosure and production floor cleaner. Swap them on schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Sized for the Nexa3D XiP Pro (not the standard XiP)
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Replacement 9.3-inch 4K monochrome LCD for the Nexa3D XiP — the masking screen that projects each layer through the light engine. A worn or failing LCD shows up as dim areas, stuck pixels or incomplete cures; this drop-in module restores full-resolution printing.
- ✓ 9.3″ 4K monochrome masking LCD
- ✓ Direct replacement for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
QATM QPREP Solution Boxes bundle every grinding and polishing consumable needed to prepare a specific material for metallographic analysis — an evaluated step-by-step preparation guide plus grinding disc, grinding paper, diamond suspension and polishing cloth in one box.
- ✓ Complete, evaluated prep recipe for one material — guide + all media
- ✓ 11 material-specific boxes · media for Ø250 mm and Ø300 mm systems
- ✓ Ideal for unknown specimens and labs new to preparation
In stock
· Contact for lead timeCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machine is this changeover kit for?
Why use a dedicated changeover kit?
When do I need one?
Place your order, or talk to an engineer first
Order Nexa3D Material Changeover Kit for NXD – P/N 11276 direct, or talk to materials engineer