In stock
Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container
Replacement wash bucket for the Nexa3D XiP Wash+Cure station — the container that holds the cleaning solvent your printed parts are rinsed in. Swap a cracked or heavily fouled bucket to keep the wash cycle clean and contained.
- ✓ Solvent wash container for the XiP Wash+Cure
- ✓ Direct fit for the Nexa3D XiP Wash+Cure station
- ✓ Genuine Nexa3D part · ships in 2 business days
$87
The wash bucket is where cured-resin parts get their solvent rinse in the Nexa3D Wash+Cure. Over time buckets crack or foul with cured resin, and a compromised container makes for a messy, less effective wash. This genuine replacement drops straight back into the station.
Compatibility & Specifications
- Type: solvent wash container / bucket
- Function: holds the cleaning solvent during the wash cycle
- Compatible station: Nexa3D XiP Wash+Cure
- Part: genuine Nexa3D Wash+Cure bucket (XIP_WC1_BUCKET)
- Replace when: cracked, leaking or heavily fouled with cured resin
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. A second bucket also lets you run different solvents without cross-contamination. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container
Replacement tool kit for the Nexa3D NX Pro, NXD and NXE printers — the hand tools Nexa3D supplies for operating and maintaining the machine, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D hand-tool set for NX Pro / NXD / NXE
- ✓ For part removal and routine maintenance
- ✓ Genuine Nexa3D kit (P/N 11083) · ships in 2 business days
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Replacement activated-carbon cartridge for the Nexa3D XiP AiR air-filtration accessory. It captures resin odour and VOCs from the XiP's exhaust, so a saturated cartridge should be swapped to keep the AiR unit filtering effectively.
- ✓ Activated-carbon odour / VOC capture cartridge
- ✓ Fits the Nexa3D XiP AiR filtration unit
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D XiP Alignment Kit for build-plate leveling on the Nexa3D XiP desktop resin 3D printer — part 12347-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D alignment kit — part 12347-01 (Rev A)
- ✓ Levels and aligns the XiP build platform for flat first layers
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
Made to order
· Made to order — typically ships in 1–2 weeks
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which station is this wash bucket for?
Is this a genuine Nexa3D part?
When should the bucket be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container direct, or talk to materials engineer