In stock
Nexa3D Replacement LED Module for XiP Pro – Light Engine
Replacement LED module for the Nexa3D XiP Pro — the UV light source that cures resin through the masking LCD. As LEDs age, output drops and cures become uneven or slow; a fresh module restores consistent, full-area curing.
- ✓ UV LED light-engine module for the XiP Pro
- ✓ Direct replacement for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
$3,100
Looking for Nexa3D resins? They are discontinued. See current replacements →
The LED module is the XiP Pro’s UV engine — the light source that cures resin through the masking LCD. As LEDs age their output falls, and cures turn slow or uneven across the build area. A fresh module restores consistent, full-area curing to a production printer.
Compatibility & Specifications
- Type: UV LED light-engine module
- Function: supplies the curing energy behind the masking LCD
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro LED module
- Replace when: weak or uneven cures, longer print times or reduced light output
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Because the light engine affects every print, keeping a spare protects XiP Pro uptime. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Replacement LED Module for XiP Pro – Light Engine
Luer-lock tip caps for Sygnis F-NIS syringe barrels — an airtight seal so you can pre-fill, store and ship barrels without waste.
- Pack of 20 · $30
- One cap fits 10, 30 and 55 ml barrels
- Airtight luer-lock seal
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
OEM pour spout for the 1 L (1 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-02 (Rev B).
- ✓ Genuine Nexa3D spare · P/N 12053-02-RevB
- ✓ Fits the 1 L (1 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Teflon-lined 0.25 mm dispensing tips for the Sygnis F-NIS 23151 — the PTFE lining resists clogging with filled and multi-phase pastes.
- Pack of 20 · $120
- 0.25 mm bore, PTFE-lined stainless cannula
- Luer-lock — fits every F-NIS barrel
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Slotted, chamfered replacement build plate assembly for the Nexa3D NX Pro and NXD (NXE 400 series). The slots ease resin drainage and peel forces; the chamfer aids part release. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted chamfer platform — drainage and easier release
- ✓ Fits Nexa3D NX Pro / NXD (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12389) · ships in 2 business days
In stock
· 2 Business Days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
A physical sample kit of parts printed on Nexa3D's ultrafast LSPc resin printers — twelve materials in one box, so your team can judge real surface finish, detail and material behaviour before committing to a resin.
- ✓ 12 printed sample parts across the Nexa3D resin range
- ✓ Model, engineering, flexible, ceramic-filled, flame-retardant and high-temp resins
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facilityWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
What does the LED module do?
Which printer is it for, and is it genuine?
When should the LED module be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Replacement LED Module for XiP Pro – Light Engine direct, or talk to materials engineer