Made to order
- Install & operator training AxtraVolume + HPS Slicer setup, on-site
- Resin & exposure tuning for your validated materials
Axtra3D Lumia X1 HPS Industrial Resin 3D Printer – Laser + 4K DLP | 249×140×499 mm
The Axtra3D Lumia X1 is an industrial resin 3D printer built on Hybrid PhotoSynthesis (HPS) — a 4K DLP projector and a laser working the same 405 nm layer, delivering SLA-grade resolution at 2×–20× the throughput of conventional resin printers on an open 249×140×499 mm platform.
- ✔ HPS: laser + 4K DLP on one layer — speed and SLA-grade detail together
- ✔ TruLayer separation runs large cross-sections and filled, viscous resins
- ✔ Open 405 nm system — Henkel Loctite, BASF Forward AM, Arkema and more
- ✔ Lead time: configured to order — request a quote for delivery & installation
What your production engineer actually checks
Resolution without the speed penalty
HPS runs a laser and 4K DLP on the same layer, so you don't trade detail for throughput. Wall and feature accuracy stay SLA-grade while the DLP fills the bulk at 2×–20× conventional speed.
An applications engineer on the line
Factory-trained engineers, not a ticket queue. Resin selection, exposure tuning and production support in under 24h — we run resin production ourselves. NDA standard.
The Axtra3D Lumia X1 is an industrial resin 3D printer built on Hybrid PhotoSynthesis (HPS) — a 4K DLP projector and a laser working the same 405 nm layer, so you get SLA-grade resolution at 2×–20× the throughput of conventional resin printers, on an open material system.
Why engineers choose the Lumia X1
Hybrid PhotoSynthesis removes the resin-printing trade-off between speed, resolution and part size.
HPS: laser + 4K DLP together
Hybrid PhotoSynthesis fires a 4K DLP projector and a laser on the same 405 nm layer — DLP cures the bulk fast while the laser traces walls and detail at a 60 µm spot. Speed and SLA-grade resolution at once.
TruLayer adaptive separation
Sensors in a glass plate below the vat detach each cured layer and cancel suction forces — so large cross-sections and highly filled, viscous resins print without the size limit LCD and DLP systems hit.
2×–20× throughput
2× to 20× the throughput of conventional SLA / DLP / LCD, and the gain doesn’t fall away as parts grow — a full plate of molds prints as efficiently as one jewelry piece.
Open 405 nm material system
Axtra OpenAccess runs filled and unfilled 405 nm resins across a wide viscosity range — validated with Henkel Loctite, BASF Forward AM, Arkema and more. No cartridge lock-in.
How Additive Plus delivers it
Matched to your resins and parts, installed by engineers who run these systems.
Match resins & parts
We confirm the right validated resins and build modes (Extreme Quality, High Quality, DLP) for your parts before you commit.
Install & train on-site
Engineers install the Lumia X1, set up AxtraVolume software and the HPS Slicer, and train your team on the workflow.
Dial in & support
We help tune exposure and post-cure for your materials and stay on the line for production support — sub-4h reply, NDA standard.
Compatible Materials
Open 405 nm ecosystem — filled and unfilled resins across a wide viscosity range. Any biocompatibility or dental clearance comes from the validated resin, not the printer.
- Validated partners: Henkel Loctite, BASF Forward AM, Arkema, INFINAM (Evonik), 3D Systems, NextDent, Keystone, pro3dure, Spectroplast
- Modes: OpenAccess (open) and Axtra Solutions (turnkey validated profiles)
- Types: engineering / tooling, dental and medical resins (via partner certifications), high-viscosity and filled formulations
System & Process Specifications
- Build volume: 9.8×5.5×19.6 in / 249×140×499 mm
- Light engine: HPS — simultaneous laser + 4K DLP, 405 nm
- Resolution: up to 50 µm XY; laser spot 60 µm ±15%; double Z-axis, 5 µm step
- Layer thickness: 25–200 µm (material / design dependent)
- Footprint / weight: 31.5×31.5×70.9 in / 800×800×1800 mm; ~617 lb / 280 kg
- Software: AxtraVolume + HPS Slicer · Regulatory: CE / FDA / RoHS compliant, NRTL ready · See the full Specifications tab below.
Where the Lumia X1 runs
Production-grade resin parts across industries.
Not sure the Lumia X1 is the right printer?
Compare it with the DLP-only sibling and other industrial resin systems.
LSPcNexa3D XiP ProCompare printer →
As a serviceSLA parts serviceGet a quote →
Why Source the Lumia X1 Through Additive Plus
- Application engineering from a team that runs resin production in-house
- Resin and build-mode selection matched to your parts
- Install, software setup and operator training included with the system
- Leasing and financing available for capital equipment
- <24h response · 200+ AM systems delivered across 23 countries
| Brand | Axtra3D |
| Build Volume | 9.8×5.5×19.6 in / 249×140×499 mm |
| Technology | Hybrid PhotoSynthesis (HPS) — laser + 4K DLP |
| Light source | Laser + 4K DLP |
| Wavelength | 405 nm |
| Layer thickness | 25–200 µm |
| Material | Open 405 nm resins (filled & unfilled) |
| Dimensions | 31.5×31.5×70.9 in / 800×800×1800 mm |
| Weight | ~617 lb / 280 kg |
| Certification | CE, FDA, RoHS compliant, NRTL ready |
| Country of origin | USA |
Product videos
Send us your STL and target resin — we'll print a benchmark on HPS and share detail, surface finish and cycle time before you commit to a system.
Other products teams run alongside Axtra3D Lumia X1 HPS Industrial Resin 3D Printer – Laser + 4K DLP | 249×140×499 mm
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for long single-piece parts — automotive patterns, extended trim, one-piece molds — without stitching or Z-seam artifacts.
- ✓ 47×32×24 in / 1200×800×600 mm build chamber — a full-length bumper pattern in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
Flagship hybrid additive + subtractive pellet 3D printer — 138×94×39 in / 3500×2400×1000 mm bed with integrated 5-axis CNC milling, raw polymer granules, 3–16 mm nozzles, up to 30 kg/h. Optional 450°C nozzle. Material cost 5–10× lower than filament.
- ✓ Print + 5-axis finish-machine in one setup — no crane move to a separate mill
- ✓ 138×94×39 in / 3.5×2.4×1.0 m bed — the largest one-piece molds Kings builds
- ✓ Lead time: 2–3 months — configured to order, installed and trained on-site
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.
- 320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
- 7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
- Lead time: configured to order — install, training & debind/sinter support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
The Farsoon FS1521M is a metre-scale LPBF metal 3D printer for serial production — a 1530 × 1530 mm platform with 16 × 500 W fiber lasers as standard, scaling to as many as 32 lasers and an 1650 mm Z-height (3,862 L) on the FS1521M-U.
- ✓ Metre-scale 1530 × 1530 mm platform · up to 32 × 500 W fiber lasers
- ✓ Titanium, nickel superalloy, stainless and aluminium alloys
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Request a build slot
The highest-throughput system in the 403 class: two 300 W fiber lasers scanning in parallel push build rates up to 9 L/h on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for serious polymer production, running high-performance nylons and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Dual 300 W fiber lasers — up to 9 L/h, the fastest 403-class throughput.
- High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Large-format, high-temperature fiber-laser SLS system with a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build. Two to four 300 W fiber lasers and a 220 °C chamber run high-performance and glass-filled polymers at production scale, with fully open parameters and a modular build-station architecture. Sold, installed and supported in the US by Additive Plus.
- Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
- 2–4 fiber lasers · 220 °C — high-performance, glass-filled & TPU polymers.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.
The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.
- ✓ 2×500 W — dual fiber lasers
- ✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Made to order
· Built to order
Multi-material ceramic SLA printer that prints two materials in the same layer — ceramic plus a second ceramic, metal or polymer — on a 3.9×3.9×5.9 in / 100×100×150 mm platform. It makes functionally graded and multi-material ceramic parts single-material printing can't. Full print → debind → co-sinter workflow supported by Additive Plus.
- Two materials in one layer — ceramic + ceramic, metal or polymer.
- Open-parameter R&D — 100×100×150 mm build, cartridges from 60 mL.
- Lead time: configured to order — material-pair & co-sinter support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is Hybrid PhotoSynthesis (HPS)?
How much faster is the Lumia X1 than a standard SLA or DLP printer?
What resins can the Lumia X1 run — is it open or closed?
What resolution and part size does the Lumia X1 achieve?
Is the Lumia X1 suitable for dental or medical parts?
What post-processing does the Lumia X1 need?
What lead time and support come with the Lumia X1?
Place your order, or talk to an engineer first
Order Axtra3D Lumia X1 HPS Industrial Resin 3D Printer – Laser + 4K DLP | 249×140×499 mm direct, or talk to materials engineer