Made to order
- Validated cure profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
ALTANA Cubic Ink Rigid 300 VP High Resolution – Fine-Detail Precision Resin (DLP/LCD/mSLA)
Rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
- ✓ Ultra-thin layers & crisp XY resolution — fine-detail precision parts
- ✓ 37 MPa tensile · 1900 MPa modulus · 8% elongation — rigid yet not brittle
- ✓ Very low water uptake (0.3%) & strong chemical resistance
- ✓ Fast printing thanks to high reactivity
What your process engineer actually checks
Resolution and stability we can validate
The ultra-thin depth of penetration, 37 MPa tensile and 0.3% water uptake come straight from the ALTANA TDS. We help set exposure and post-cure so fine features print crisp and stay dimensionally stable.
A materials engineer on the line
Factory-trained support, not a remote ticket queue. We help you dial in fine detail on your printer. Sub-24h reply, NDA standard.
ALTANA Cubic Ink Rigid 300 VP High Resolution is a rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
Why engineers choose Rigid 300 VP
Fine-detail precision without brittleness.
Outstanding resolution
Ultra-thin layers and crisp XY detail (Dp 0.08–0.10 mm) for fine features and smooth surfaces.
Rigid yet not brittle
37 MPa tensile strength, 1900 MPa modulus, 8% elongation and 9.4% deflection at fracture.
Stable in fluids
Very low 0.3% water uptake and strong chemical resistance (mostly under 0.1% mass gain).
Fast printing
High reactivity enables quick exposure and high throughput on DLP/LCD systems.
Technical properties
Measured on yellow resin (TDS v2). Post-cured 2×30 min UV, Prusa CW1s.
| Property | Value | Method |
|---|---|---|
| Viscosity (25 °C) | 170 mPa·s | DIN EN ISO 3219 |
| Density | 1.05 g/mL | DIN EN ISO 15212-1 |
| Depth of penetration (405 / 385 nm) | 0.08 / 0.10 mm | — |
| Ultimate tensile strength | 37 MPa | DIN EN ISO 527-5A |
| Tensile modulus | 1900 MPa | DIN EN ISO 527-5A |
| Elongation at break | 8.0 % | DIN EN ISO 527-5A |
| Flexural strength / modulus | 57 / 1800 MPa | DIN EN ISO 178 |
| Izod, notched | 17 J/m | DIN EN ISO 180 |
| Shore hardness | 80 D | DIN EN ISO 7619 |
| HDT-B | 52 °C | DIN EN ISO 75 |
| Water uptake (24 h) | 0.3 % | Internal |
| Color | Translucent yellow | — |
A similar option to Loctite PRO9274
Same fine-detail class, with higher strength and modulus.
| Property | Loctite PRO9274 | Cubic Ink Rigid 300 VP HR |
|---|---|---|
| Ultimate tensile strength | 33 MPa | 37 MPa |
| Tensile modulus | 1500 MPa | 1900 MPa |
| Elongation at break | 7 % | 8.0 % |
| HDT (0.45 MPa) | 52 °C | 52 °C |
| Shore hardness | 80 D | 80 D |
Higher tensile strength, modulus and elongation at the same hardness and HDT. Talk to us about the best fine-detail fit for your parts.
Typical applications
Where fine detail matters.
How you run it
Print → wash → UV post-cure.
LCD / DLP / mSLA at 385 or 405 nm, ultra-thin layers. Stir before use.
Wash
Cubic Ink Cleaner 400 or IPA; dry with compressed air.
Post-cure
UV post-cure (2×30 min, Prusa CW1s or equivalent) for full properties.
| Size | 1 kg, 5 kg |
| Brand | ALTANA Cubic Ink |
We formulate and qualify. Custom variants on request.
Need a tuned resin, a filled or castable formulation, or a profile for a printer we don't list yet? Our materials team qualifies custom formulations and prints test specimens before you commit. Typical lead 2–4 weeks.
Complete the workflow
The Axtra3D Revox X1 is a production-grade 4K DLP resin 3D printer — the same chassis and TruLayer separation as the flagship Lumia X1, at an entry price point for teams that can work within DLP part quality on a 9.8×5.5×19.5 in / 249×140×495 mm build volume.
- ✔ Production 4K DLP at 405 nm — 65 µm XY resolution
- ✔ TruLayer separation runs large cross-sections and filled, viscous resins
- ✔ Open or closed 405 nm material configurations
- ✔ Lead time: configured to order — request a quote for delivery & installation
Desktop automated station that removes dissolvable support material from FDM and PolyJet 3D-printed parts in a heated, agitated water-detergent bath — no IPA, no hand-picking.
- ✓ Automated heated soluble-support removal (50–85 °C) for FDM & PolyJet
- ✓ 46 L tank · 10×10×12 in basket · quiet desktop footprint
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
Other products teams run alongside ALTANA Cubic Ink Rigid 300 VP High Resolution – Fine-Detail Precision Resin (DLP/LCD/mSLA)
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
In stock
· Express 2–3 wks · Standard 6–8 wks
Fast-calibration black resin (3x speed!) for professional finishes on SLA/DLP printers.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.
- ✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
- ✓ Compatible with thousands of commercial injection materials, including reinforced grades
- ✓ Fully dissolvable — undercuts and internal features release without side actions
- ✓ Genuine Nexa3D · 5 kg · in stock — ships within 5–7 business days
Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →
In stock
· Ships in 1–2 business days from US stock.
Bring a composition the catalog doesn’t cover — we ultrasonically atomize your alloy into fine, spherical, low-oxygen metal powder at a target 20–120 µm PSD, characterize every batch, and ship it print-ready with the measured powder data.
- ✔ Reactive, refractory, intermetallic or high-entropy — from rod, wire, ingot or scrap
- ✔ Frequency-selected particle size for LPBF, DED, MIM or binder jetting
- ✔ Every batch characterized — measured PSD, chemistry, O₂ and flow shared with you
- ✔ NDA standard · feasibility check first · quoted per composition
Made to order
· Lead time confirmed per composition — request a quote.
Print titanium parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, high-strength, lightweight metal.
- ✔ Rp0.2 844 MPa, Rm 940 MPa at 4.33 g/cc after sintering — tested to ASTM E8/E8M
- ✔ Debind and sinter parameters plus the full datasheet included with every spool
- ✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review
In stock
· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.
Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.
- ✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
xMODEL17-Clear is a high-clarity prototyping resin from Nexa3D — fine feature detail and transparency at very high print speed.
- ✓ High optical clarity for see-through models, fluidics, and light-transmitting prototypes
- ✓ Fine feature resolution with fast throughput on the Nexa3D XiP
- ✓ Genuine Nexa3D resin for the XiP · 1.5 kg · ships from US stock in 2 business days
In stock
· 2 Business Days
Extreme heat. Oxidation-proof. Non-magnetic. Genuine Carpenter PowderRange® X (Hastelloy® X) nickel superalloy for LPBF & EBM metal 3D printing.
- ✓ Strength & oxidation resistance to 2200°F (1204°C)
- ✓ Low crack susceptibility — wrought-equivalent as-processed
- ✓ Full COA on every lot · small volumes · in US stock, ready to ship
In stock
· In US stock · ready to shipCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is Rigid 300 VP High Resolution for?
How fine is the resolution?
Is it stable in contact with fluids?
How is it processed?
Place your order, or talk to an engineer first
Order ALTANA Cubic Ink Rigid 300 VP High Resolution – Fine-Detail Precision Resin (DLP/LCD/mSLA) direct, or talk to materials engineer