What are the PSX injection‑molding product models and their key specifications?

Currently, the PSX series does not have widely published specifications for multiple models. The APSX‑PIM line, which is a well-documented desktop injection molding machine, has a compact footprint, electric drive, approximately 5 tons of clamp force, a shot size of about 30 cm³, and can process plastics at temperatures up to approximately 315 °C. Once the exact PSX models are confirmed, their key specifications can be documented in terms of clamp force, shot size, platen area, cycle capability, and compatible materials.

How do PSX and APSX desktop injection machines compare?

APSX‑PIM machines are fully automatic, all-electric desktop injection presses designed for prototyping and low-volume production with a compact footprint and minimal infrastructure requirements. Compared to PSX machines, which may be more manual or semi-automatic, APSX machines offer higher levels of integration, ease of use, and repeatability. APSX machines typically deliver faster setup, easier experimentation, and more consistent output, making them suitable for applications requiring rapid design iteration and reliable part production.

What are the recommended mold sizes and mold materials for APSX machines?

The APSX‑PIM machine supports mold sizes up to approximately 6 inches in height and 4.8 inches in width. Recommended mold materials include aluminum or steel, which are suitable for the machine's clamp force and shot volume. The desktop format favors molds that are lighter and easier to change than full-size production molds. PSX machines, if similar in scale, would typically have comparable mold size and material recommendations.

What is a typical cycle time and throughput for APSX machines?

Cycle times on APSX‑PIM machines generally range from 45 to 90 seconds, depending on part geometry, plastic material, cooling time, and mold design. This translates to roughly 40 to 80 parts per hour for a single-cavity mold. Desktop injection machines are primarily intended for prototyping or low-volume production, where the focus is on rapid iteration and flexibility rather than mass production.

APSX Plastic Injection Molding Solutions

3D Printers

200+ qualified systems across every additive technology — including AO Metal, the LPBF printer we design and build ourselves.

All printers (200+) →

Technology

LPBF / DMLS · AO Metal FFF / FDM SLA DLP SLS FGF XiP — Nexa3D LFAM DED WAAM DIW Binder Jetting SLA Ceramic

Atomizers — ATO Lab

Make your own metal powder in-house, or have us run a custom alloy batch in 3–4 weeks.

All atomizers →

Systems

ATO Lab benchtop ATO Sparq ATO Noble — gas atomizer Ultrasonic atomizers

Powder services

Custom alloy batches 3–4 wk Powder QA & PSD Re-atomization & recycling

3D Scanners

Capture parts for reverse engineering, inspection, and repair.

All scanners →

Hardware

Handheld scanners Metrology-grade scanners Structured-light scanners

Bundles

Reverse-engineering kit Inspection software Scan-to-CAD service

Post-Processing

Everything between a green part and a finished, qualified part.

All post-processing →

Equipment

Depowdering stations Wash & cure Support removal

Finishing

Surface finishing Heat treatment Media blasting

Furnaces

Debind and sinter green parts into fully dense, qualified components.

All furnaces →

Furnaces

Debind & sinter furnaces Vacuum furnaces Bound-metal sintering

Heat treatment

Stress relief HIP partners Atmosphere control

Industrial Vacuum

Metal-safe powder handling and shop air, kept clean and compliant.

All vacuums →

Vacuums

Metal-safe vacuums ATEX-rated units Combustible-dust certified

Air & safety

Fume & filtration Powder recovery HEPA capture

Particle Analysis — Microtrac

Measure powder size and morphology so every build is repeatable.

All analysers →

Instruments

Laser diffraction Dynamic image analysis Sieve analysis

Outputs

PSD & D-values Sphericity / morphology Lot-to-lot QA

Plastic Injection — APSX

Bridge from printed prototypes to short-run injection molding.

All PIM →

Machines

APSX-PIM Benchtop molders

Tooling

Molds & inserts Pellets & resin

Not sure which system?

We'll narrow 200+ systems to 2 in 20 minutes.

A named applications engineer scopes your part and budget — no sales rep, no obligation.

Free demo on the shortlist
Install + training included

Talk to an engineer →Just want parts printed? Get an instant price →

Metal powders

Gas-atomized, lot-traceable, with COA and process parameters in every order.

All metal powders →

Stainless & steel

316L stainless From $35 17-4 PH stainless $54/kg Maraging / tool steel

Ti / Ni / Al

Ti-6Al-4V Grade 23 Inconel 718 AlSi10Mg Custom alloys ATO Lab

Polymers & resins

Validated profiles for the printers we sell — load and print.

All polymers & resins →

Powders & filaments

Nylon / PA (SLS)Advanced plastics — PEEK FDM filaments Ceramic filaments Metal filaments

Resins

Standard resin Castable resin Engineering & ceramic resin

Consumables

The supporting kit so the first build runs clean.

All consumables →

Build & handling

Build plates — alloy-matched Sieves & handling Inert gas & filters Membranes

Qualify first

Sample packs — 1 kg Post-processing supplies

Custom alloys — ATO Lab

Need a powder we don't stock? We atomize it in-house in 3–4 weeks.

Request a batch →

We atomize

Biocompatible alloys Refractory metals Proprietary blends

Every batch

Full COA PSD to spec Print parameters

Guides & datasheets

Pick the right material with confidence.

Resource library →

Choose

Materials selection guide Printer compatibility

Reference

Datasheets & COA library Storage & handling

120+ SKUs · stocked in L.A.

Order today, it ships today.

COA and process parameters in every order, so you can reorder without re-qualifying.

Ships same day before 2pm PT
COA + parameters included

Browse materials store →Prefer us to print it? Get an instant price →

Order a print

Print by material

Know your material? Pick it, upload your file, and get a price instantly from our online calculator — no waiting.

Open the price calculator →

Metals

Stainless steel — 316L / 17-4 Instant price Titanium — Ti-6Al-4V Instant price Aluminum — AlSi10Mg Instant price Inconel 718 Instant price

Plastics, resin & ceramic

Nylon / PA — SLS Instant price Plastic — FDM Instant price Advanced plastic — PEEK Instant price Resin — SLA / DLP Instant price Silicone Quote 24h Ceramic Quote 24h

Print by process

Prefer to choose the technology yourself? Quote across all 8.

Compare processes →

Metal & large-format

Metal — LPBF / DMLS Metal — DED Metal — WAAM Large-format — LFAM Large polymer — FGF

Polymer, resin & ceramic

Resin — SLA / DLP Nylon — SLS Plastic — FDM Ceramic — SLA Ceramic

Engineering services

From a sketch to a qualified part — we cover the gaps.

All services →

Before the print

DfAM review Free CAD design & redraw 3D scanning & reverse engineering

After the print

Finishing & post-processing Small-batch production Inspection & COA

By industry

Workflows tuned to your standards and lead times.

All industries →

Regulated

Aerospace Medical Defense

Commercial & R&D

Automotive Research & education

Resources

Learn the trade-offs before you commit.

Resource library →

Guides

Materials guide Technology guide Industry guide

Proof & shop

Case studies 3D printed parts & models Exclusive parts

Two ways to order

Get a price now — or have an engineer quote it.

Common materials price instantly in our online calculator. Tricky part? Upload it and a named engineer quotes in 24h.

Instant price on common materials
Upload STL · STEP · IGES
NDA on every project

Get an instant price Upload a part for an engineer quote →

APSX

APSX offers compact, affordable, and production-ready plastic injection molding solutions designed for innovators, engineers, and small manufacturers. From the APSX-PIM injection molding machine to precision-machined molds, holders, and accessories, every component is built for durability, accuracy, and seamless operation.

Perfect for rapid prototyping and low-volume manufacturing, APSX products let you create real parts fast—right from your desktop or lab. Explore our full range of molds, stands, and accessories, and order your APSX equipment today to bring injection molding in-house with speed, precision, and control.

36 systems From $2.5 17 made in USA

APSX

Not sure which APSX? We'll narrow 8 to 2 in 20 min.

Browse other printer types

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)