All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 353–360 of 671 Items

3D Lab

The ATO Passivation Module is an automated safety system that passivates reactive metal powder — dosing controlled oxygen into the sealed container to build a protective oxide layer before it is opened.

✓ Controlled oxygen dosing builds a uniform protective oxide layer
✓ No ignition or explosion risk when the container is opened
✓ Automated, hands-off 1–2 hour cycle · works with ATO containers
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Pure | Ultrasonic Metal Powder Cleaning & Drying System

ATO Pure is an ultrasonic cleaning-and-drying station that reconditions used or freshly atomized metal powder — removing sub-5 µm fines, surface films and moisture, then drying it for reuse.

✓ Ultrasonic cleaning + integrated drying in one automated cycle
✓ Removes ultra-fine particles while preserving particle sphericity
✓ Recovers degraded powder — extends lifecycle, cuts material cost
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Wipe | Ultrasonic Feedstock Cleaning System for Metal Powder Production

ATO Wipe is an ultrasonic wire-and-rod cleaning station that prepares feedstock for ultrasonic atomization — stripping oils, oxides and residues before the metal reaches the melt.

✓ Ultrasonic + mechanical brushing for deep surface decontamination
✓ Wire and rod compatible · automatic and manual modes
✓ Native to the ATO suite — feeds ATO Lab Plus, ATO Sparq and rod feeders
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab

ATO Multi Rod Feeding System

The ATO Multi Rod Feeding System feeds multiple round rods — 4 to 10 mm diameter in self-locking collets, up to 1200 mm total length — into an ATO ultrasonic atomizer for longer, less-attended runs.

✓ Up to 1200 mm total rod length in an extended tube container
✓ Round rods 4–10 mm in self-locking collets (4, 6, 8, 10 mm)
✓ Longer runs, fewer reloads than single-rod feeding
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab

ATO Single Rod Feeding System

The ATO Single Rod Feeding System feeds rod feedstock — 1 to 10 mm diameter, up to 110 mm long, including cast rods — directly into an ATO ultrasonic atomizer.

✓ Atomizes rods 1–10 mm diameter (best on 4–6 mm), up to 110 mm long
✓ Works with cast rods — atomize as-cast alloys directly
✓ Upgradeable to a Custom Shape Feeder for non-standard feedstock
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab

ATO Wire Feeding System

The ATO Wire Feeding System feeds wire feedstock into an ATO ultrasonic atomizer in a continuous, automated process — for reactive and non-reactive alloys, using standard welding-market wire.

✓ Continuous, automated wire feed for stable powder output
✓ Long-spool compatibility — fewer changes, higher uptime
✓ Accepts standard welding-market wire — no feedstock lock-in
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

3D Lab

ATO Induction Melting System for Ultrasonic Atomization

The ATO Induction Melting System (IMS) is an optional module designed to atomize materials and minimize evaporation of low melting point elements.

Get quote

On backorder

· Configured to order — request lead time

3D Lab · Ultrasonic Sieving

ATO Sieve Ultrasonic Powder Sieving Station – Inert Argon Atmosphere | 3D Lab

The ATO Sieve is an ultrasonic powder sieving station that screens reactive and non-reactive metal AM powder inside an inert argon atmosphere — the same ATO container transfers powder straight from an ATO atomizer, so it never sees oxygen.

✓ High-frequency ultrasonic vibration — prevents mesh clogging, keeps throughput high
✓ Sieves under inert argon; optional oxygen sensor for reactive metals (Ti, Al, Zr)
✓ Direct ATO-container transfer from ATO Lab Plus / ATO Sparq — no air exposure
✓ Various screens, optional mesh sizes — configured to your target cut
✓ Lead time: configured to order — request current lead time

Get quote

On backorder

· Configured to order — request lead time

Equipment

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)