All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 345–352 of 671 Items

Avimetal · Metal LPBF

Ti64 Titanium Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

Lightweight. High strength-to-weight. Biocompatible. Genuine AVIMETAL Ti-6Al-4V (Grade 5) titanium for LPBF metal 3D printing.

✓ Gas-atomized, low-oxygen — full COA on every lot
✓ Strong value alternative, sold in small workable volumes
✓ Fast dispatch from Los Angeles (ELI / Grade 23 on request)

Prints Ti-6Al-4V Grade 23 (ELI), Ti-6Al-4V Grade 5 (TC4)

From $1280

Get quote

In stock

· 10–20 business days

3DCeram · CERAMIC SLA

Alumina 3D Printing Paste

Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.

✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Alumina Toughened Zirconia 3D Printing Paste

Print the strongest oxide in the range — alumina-toughened zirconia — on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense biocompatible ceramic.

✓ 1094 MPa 4-point bending strength at >5.2 g/cc — highest of the 3DCeram oxides
✓ Biocompatible and thermal-shock resistant — implants, dental and high-load wear parts
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Aluminium Nitride 3D Printing Paste

Print aluminium nitride (AlN) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a ceramic that conducts heat yet insulates electrically.

✓ 163 W/m·K thermal conductivity with electrical insulation — power-electronics substrates
✓ Print conformal cooling and channelled geometries not possible by pressing
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

APSX · PIM (Plastic Injection Molding)

APSX-PIM V3 Desktop Injection Molding Machine – 5-Ton Clamp | 30 cc Shot | Engineering Resins

5-ton (11,000 lbf) desktop injection molder — 1.83 cu-in / 30 cc shot, up to 626°F / 330°C, running PC, nylon, ABS, PP and other engineering thermoplastics on standard or custom aluminum molds.

✓ Fully automatic multi-mode with ejector molds — ~60 s cycle; manual single-mode with the included test mold
✓ Runs on a standard 115 V (US) or 230 V (EU) outlet — 250 lb benchtop footprint, mold swap in ~15 min
✓ Lead time: ships in about 1 week — made in Cincinnati, OH, with US-based support

From $13500

Get quote

In stock

· About 1 week

$ATO Lab Plus Ultrasonic Metal Powder Atomizer – Reactive & Refractory Alloys | 20–120 µm$

3D Lab · Ultrasonic atomization

ATO Lab Plus Ultrasonic Metal Powder Atomizer – Reactive & Refractory Alloys | 20–120 µm

Benchtop ultrasonic atomizer for reactive and refractory alloys — 20–120 µm frequency-tuned powder, up to 0.3 L/h, atomized in an inert argon atmosphere for low-oxygen AM feedstock.

✓ Produce your own Ti, Al, Zr, NiTi and HEA powder in-house
✓ Narrow PSD set by ultrasonic frequency · spherical, high-flow particles
✓ Lab-scale footprint on 400 V 3-phase — no dedicated powder facility
✓ Lead time: configured to order — request current lead time

Prints Aluminium, Copper, HEA alloys, Magnesium, Nickel, Reactive metals, Refactory metals, Stainless Steel, Titanium

Get quote

On backorder

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Sparq | AI-Powered Ultrasonic Metal Powder Atomizer

On-demand production of spherical metal powder — AI-assisted ultrasonic atomization.

ATO Sparq is an AI-powered ultrasonic metal powder atomizer for laboratories and production teams that need fast material qualification, repeatable powder quality, and full control over particle size distribution — reactive and non-reactive alloys, produced when you need them.

✓ AI-assisted process control for repeatable, on-demand batches
✓ Spherical powder with tight, frequency-selected PSD
✓ Reactive & non-reactive alloys in a low-oxygen argon atmosphere
✓ Lead time: configured to order — request lead time

Prints Aluminium, Copper, HEA alloys, Magnesium, Nickel, Reactive metals, Refactory metals, Stainless Steel, Titanium

Get quote

On backorder

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Noble Ultrasonic Precious Metal Powder Atomizer – Gold, Silver & Platinum | Zero-Loss Recovery

ATO Noble is an ultrasonic atomizer built for precious metals — it turns gold, silver, platinum and palladium feedstock into fine, spherical powder with Zero Loss recovery, so almost none of the high-value metal is lost. TIG melting under an inert argon atmosphere (oxygen below 0.1%) keeps chemistry and karat unchanged through atomization.

✓ Purpose-built for gold (9–24ct), silver, platinum, palladium and iridium
✓ Zero Loss Technology — closed-loop gas and filtration recover unused metal
✓ Spherical, high-flow powder · particle size tuned by ultrasonic frequency
✓ Lead time: configured to order — request current lead time

Prints Ag, Au 18ct, Au 99,99%, Au 9ct, Ir 99%, Precious metals, Pt

Get quote

On backorder

· Configured to order — request lead time

Equipment

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)