All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 361–368 of 671 Items

3D Lab

ATO Clean Ultrasonic Cleaner for ATO Atomizers

ATO Clean ultrasonic cleaner is a machine specifically designed for cleaning the ATO series parts exposed to powder during the atomization stage, offering a convenient and effective cleaning.

Get quote

On backorder

· Configured to order — request lead time

3D Lab

ATO Cast Induction Vacuum Casting Furnace

The ATO Cast is a compact professional-grade induction vacuum casting furnace.

Get quote

On backorder

· Configured to order — request lead time

3DCeram · Cleaning, CERAMIC SLA

3DCeram AUTO CERAKLEANER — Automated Cleaning for Ceramic 3D-Printed Green Parts

Automated cleaning system that removes excess ceramic paste from freshly printed green parts, leaving them ready to debind — replacing slow, hands-on solvent cleaning in the ceramic AM workflow.

✓ Gentle, low-mechanical-stress cleaning of fragile green parts
✓ Batch time cut dramatically vs manual (e.g. 60 min → 5 min on 70 alumina parts)
✓ Solvent longevity + recycling · no manual solvent contact

Prints Alumina, Alumina Toughened Zirconia, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Silicone Nitride, Silicore, Tricalcium Phosphate, Zirconia 3Y, Zirconia 8Y

Get quote

In stock

· Lead time, utilities and installation confirmed at quote — configured to order. Install and training included.

3DCeram · CERAMIC SLA

3DCeram C1000 FLEXMATIC Industrial Ceramic SLA 3D Printer – Serial Production | 320×320×200 mm

Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.

320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
Lead time: configured to order — install, training & debind/sinter support from California.

Build 12.6×12.6×7.9 in / 320×320×200 mm

Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

3DCeram · CERAMIC SLA

3DCeram C101 EASY LAB Ceramic SLA 3D Printer – Lab & Material Development | 100×100×150 mm

Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.

Open parameters — qualify new ceramics & formulations, not just vendor recipes.
Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
Lead time: configured to order — install, training & scale-up support from California.

Build 3.9×3.9×5.9 in / 100×100×150 mm

Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

3DCeram · Multi-material Ceramic SLA

3DCeram C101 HYBRID Multi-Material Ceramic SLA 3D Printer – Two Materials in One Layer | 100×100×150 mm

Multi-material ceramic SLA printer that prints two materials in the same layer — ceramic plus a second ceramic, metal or polymer — on a 3.9×3.9×5.9 in / 100×100×150 mm platform. It makes functionally graded and multi-material ceramic parts single-material printing can't. Full print → debind → co-sinter workflow supported by Additive Plus.

Two materials in one layer — ceramic + ceramic, metal or polymer.
Open-parameter R&D — 100×100×150 mm build, cartridges from 60 mL.
Lead time: configured to order — material-pair & co-sinter support from California.

Build 3.9×3.9×5.9 in / 100×100×150 mm

Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

3DCeram · Multi-material Ceramic SLA

3DCeram C900 HYBRID Multi-Material Ceramic SLA 3D Printer – Up to 4 Materials | 300×300×100 mm

Production-scale multi-material ceramic SLA system: alongside the base ceramic it deposits up to three additional materials in one part, via dispensers from needle valve to micro-distribution, all in CPS 2.0. On an 11.8×11.8×3.9 in / 300×300×100 mm platform with a fine 35 µm UV laser. Full print → debind → co-sinter workflow supported by Additive Plus.

Up to 4 materials in one part — base ceramic + 3 dispensed materials.
Fine 35 µm UV laser — 355 nm, detail across the 300×300 mm platform.
Lead time: configured to order — material-set & co-sinter support from California.

Build 11.8×11.8×3.9 in / 300×300×100 mm

Prints ATZ, Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Tricalcium Phosphate, Zirconia 8Y

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

3DCeram · CERAMIC SLA

Cordierite 3D Printing Paste

Print near-zero-expansion cordierite parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dimensionally stable oxide ceramic.

✓ Coefficient of thermal expansion near zero — dimensional stability through thermal cycling
✓ Aerospace optics, metrology and vacuum hardware; >98% dense after sintering
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Equipment

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)