In stock
Nexa3D Build Plate for XiP – Replacement Print Platform
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
$260
Every XiP print starts on the build plate, so a flat, clean platform is the foundation of a reliable job. When a plate warps, gouges or simply stops holding parts, first layers fail and prints let go mid-build. This genuine replacement plate brings the printer back to dependable adhesion.
Compatibility & Specifications
- Type: machined build platform / print plate
- Function: the surface prints adhere to and grow from
- Compatible printer: Nexa3D XiP desktop resin printer (not XiP Pro)
- Part: genuine Nexa3D XiP build plate (XIP_BP1)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. A spare plate keeps a printer farm moving when one gets tired. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D Build Plate for XiP – Replacement Print Platform
Replacement light-engine protective glass for Nexa3D NXE printers with the LE5 light engine (NX Pro generation). The glass shields the projector optics from resin and debris; a scratched or fouled pane scatters light and softens prints, so swapping it restores clean projection.
- ✓ Protective glass for the NXE LE5 / NX Pro light engine
- ✓ Match your light-engine generation before ordering (LE1–LE4 uses a different kit)
- ✓ Genuine Nexa3D kit (P/N 12018) · currently on backorder — contact us for lead time
Made to order
· Currently on backorder — contact us for lead time
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
Electropolished stainless-steel dispensing tips for the Sygnis F-NIS direct-ink-writing (DIW) system — free of silicones and chlorides for sterile and fine work, with color-coded diameters from 0.20 to 1.50 mm for precise, consistent flow.
- ✓ Electropolished cannula — accurate, consistent extrusion
- ✓ Six color-coded bores 0.20–1.50 mm · luer-lock fit · 25.4 mm length
- ✓ In US stock · sold in packs of 20 · ships in 2 business days
In stock
· 2 Business Days
Solid replacement build plate assembly for the Nexa3D NX Pro (NXE 400 series). Its continuous flat surface gives parts a full-contact base. Swap a worn or warped plate to keep first-layer adhesion reliable across the build area.
- ✓ Solid, continuous machined platform
- ✓ Fits Nexa3D NX Pro (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12390) · ships in 2 business days
In stock
· 2 Business Days
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement masking LCD module for the Nexa3D XiP Pro industrial resin printer — the display that defines every cured layer under the light engine. A worn LCD shows as dim zones, stuck pixels or incomplete cures; this drop-in module restores full-resolution output.
- ✓ Masking LCD module for the XiP Pro light engine
- ✓ Direct replacement for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D replacement resin vat container for the XiP desktop resin 3D printer — the rigid outer tray that holds the Everlast membrane and resin during printing. In stock at our US facility, ships in 2 business days.
- ✓ Outer vat container / tray for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part — pairs with the XiP Everlast membrane
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printer is this build plate for?
Is this a genuine Nexa3D part?
When should the build plate be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Build Plate for XiP – Replacement Print Platform direct, or talk to materials engineer