In stock
Nexa3D Solid Build Plate Assembly for NX Pro / NXE 400 – P/N 12390
Solid replacement build plate assembly for the Nexa3D NX Pro (NXE 400 series). Its continuous flat surface gives parts a full-contact base. Swap a worn or warped plate to keep first-layer adhesion reliable across the build area.
- ✓ Solid, continuous machined platform
- ✓ Fits Nexa3D NX Pro (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12390) · ships in 2 business days
$1,372
The build plate is where every NX Pro job starts, so a flat, true platform is the foundation of reliable adhesion. This solid assembly gives parts a continuous, full-contact base. When a plate warps or stops holding prints, a fresh one restores dependable first layers across the build area.
Compatibility & Specifications
- Type: solid build plate assembly
- Benefit: continuous flat surface for a full-contact part base
- Compatible systems: Nexa3D NX Pro (NXE 400 series)
- Part number: 12390 (genuine Nexa3D assembly)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. For large builds that benefit from drainage, ask us about the slotted chamfer plate instead. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | NXD, NXE |
Other products teams run alongside Nexa3D Solid Build Plate Assembly for NX Pro / NXE 400 – P/N 12390
PVDF fluoropolymer filament for FDM 3D printing — outstanding chemical, flame, and UV resistance with a 158°C heat-deflection temperature, for parts that live in aggressive chemical, high-heat, or harsh outdoor environments.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock — request a quote for volume and lead time
In stock
- 1K continuous carbon fiber engineered for FibreSeeker 3 co-extrusion
- ~60% fiber volume fraction, tensile strength up to 900 MPa
- Continuous load paths for strong, lightweight structural parts
In stock
· In stock · ships from the US
ASA filament for FDM 3D printing — ABS-grade strength with the UV, weather, and color stability sunlight doesn't fade, plus a 90°C HDT for outdoor housings, automotive exterior parts, and signage.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
Flexible TPU 95A filament for FDM 3D printing — a Shore 95A semi-flexible elastomer with high elongation, abrasion resistance, and shock absorption, for seals, gaskets, dampers, and grips that need to bend without breaking.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
Print the pattern, burn it out clean, cast perfect metal. Engineering-grade castable resin for jewelry, dental and investment casting — stocked in Los Angeles.
- Ash-free burnout — no expansion, no cracked molds
- Fine detail: filigree, crowns, micro-features
- Runs on 405 nm LCD/DLP, LSPc and SLA printers
In stock
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
Nexa3D xMODEL15-Gray is an economical 405 nm LSPc photopolymer for fast, high-detail concept and appearance models — 55 MPa tensile, 78–80 Shore D, with a neutral gray finish that reads surface detail in design reviews.
- ✓ High detail and a paintable, plate-ready finish
- ✓ Runs on Nexa3D XiP, XiP Pro and NXE 400 / NXE 400 Pro — 405 nm LSPc
- ✓ In US stock — ships in 2 business days, lot-matched for repeatable prints
In stock
· 2 Business Days
- ✔ Very high hardness, excellent thermal performance, chemically resistant
- ✔ Print → debind → sinter — advanced technical ceramic without a powder system
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machines is this build plate for?
Is this a genuine Nexa3D part?
When should the build plate be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Solid Build Plate Assembly for NX Pro / NXE 400 – P/N 12390 direct, or talk to materials engineer