In stock
Zetasinter 4L Furnace Tube
Replacement alumina tube for the Zetasinter 4L debinding and sintering furnace.
- ✔ Direct replacement part for the Zetasinter 4L
- ✔ Genuine Zetamix by Nanoe component
- ✔ Shipped from California, invoiced in USD
$2,620
The furnace tube is the working envelope of your Zetasinter 4L
Genuine 4L component
This is the alumina tube built for the Zetasinter 4L debinding and sintering furnace. Ordering the genuine Zetamix by Nanoe part keeps the fit and thermal behavior your process was validated against.
We confirm the fit first
Send us your furnace serial or part number and we confirm this is the right tube for your unit before you order. It ships from California, invoiced in USD, with a typical lead time of 10 to 20 business days.
Replacement alumina tube for the Zetasinter 4L debinding and sintering furnace — a direct-fit part built by Zetamix by Nanoe. It fits the Zetasinter 4L, not the earlier tubular furnace.
Why source it through Additive Plus
A genuine Zetamix by Nanoe part, fit-checked to your furnace and shipped from stock in the United States.
OEM alumina tube built to spec as a direct replacement for the Zetasinter 4L.
Send your furnace serial and we confirm the tube matches your unit before you order.
Stocked and shipped from California, invoiced in USD, typical lead time 10 to 20 business days.
Compatibility & specifications
- Direct replacement part for the Zetasinter 4L debinding and sintering furnace
- Fits the Zetasinter 4L, not the earlier tubular furnace
- Alumina furnace tube
- Genuine Zetamix by Nanoe component
- Typical lead time 10–20 business days depending on order queue
- Shipped from California, invoiced in USD
Before you order
Not sure this is the right part for your unit? This tube fits the Zetasinter 4L, not the earlier tubular furnace. Send us your furnace serial or part number and we confirm the right part before you order.
| Brand | Zetamix by Nanoe |
Other products teams run alongside Zetasinter 4L Furnace Tube
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement wash bucket for the Nexa3D XiP Wash+Cure station — the container that holds the cleaning solvent your printed parts are rinsed in. Swap a cracked or heavily fouled bucket to keep the wash cycle clean and contained.
- ✓ Solvent wash container for the XiP Wash+Cure
- ✓ Direct fit for the Nexa3D XiP Wash+Cure station
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.
- Two pneumatic heads, independent pressure for each cartridge
- Independent heating up to 60 °C for each cartridge
- Shared UV 365/405 nm · 120 °C glass platform kept
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
Made to order
· Ships in 2–3 weeks
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Luer-lock tip caps for Sygnis F-NIS syringe barrels — an airtight seal so you can pre-fill, store and ship barrels without waste.
- Pack of 20 · $30
- One cap fits 10, 30 and 55 ml barrels
- Airtight luer-lock seal
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Replacement 9.3-inch 4K monochrome LCD for the Nexa3D XiP — the masking screen that projects each layer through the light engine. A worn or failing LCD shows up as dim areas, stuck pixels or incomplete cures; this drop-in module restores full-resolution printing.
- ✓ 9.3″ 4K monochrome masking LCD
- ✓ Direct replacement for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which furnace does this tube fit?
When should the alumina tube be replaced?
How do I order and how long does it take?
Place your order, or talk to an engineer first
Order Zetasinter 4L Furnace Tube direct, or talk to materials engineer