Made to order
- COA on request — PSD, sphericity, flow rate, chemistry
- Mutual NDA before any file or spec review
A-Powder AlSi10Mg Powder for Metal 3D Printing | 20–63 µm LPBF – 10 kg / 22 lbs
A-Powder AlSi10Mg Aluminum powder price: $380 per 10 kg ($38.00/kg)
A-Powder AlSi10Mg — AO Metal’s LPBF powder line, 20–63 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
What your materials team actually checks
Lightweight & thermally conductive
AlSi10Mg prints dense aluminium parts at roughly a third of the weight of steel, with high thermal conductivity — ideal for heat exchangers and lightweight structures. Heat-treatable (T6) for higher strength. Lot-tested.
A materials engineer on the line
Qualification question? We've run these alloys in production on AO Metal — parameter sets available. Sub-4h reply, NDA standard. Use the Talk to materials engineer button above.
A-Powder by AO Metal · AlSi10Mg
A-Powder AlSi10Mg is the standard aluminium alloy for laser powder bed fusion — light, thermally conductive and easy to print in thin walls and internal channels.
AlSi10Mg powder in brief
- Low weight — aluminium parts for weight-sensitive assemblies.
- Heat transfer — good thermal conductivity for heat exchangers and cooling plates.
- 20–63 µm cut — read the note below if your parameters are tuned to a finer cut.
About A-Powder. A-Powder is AO Metal’s own line of LPBF metal powders, produced in China under an ISO 9001 quality system. Additive Plus sells and supports it in the US — you order and pay here, and our materials engineer answers your questions.
Composition
| Aluminum (Al) | Balance |
| Silicon (Si) | 9.0–11.0% |
| Magnesium (Mg) | 0.25–0.45% |
Main alloying elements; the full chemistry of your lot is on its certificate of analysis.
Mechanical data
| Tensile strength, heat treated | ≥ 340 MPa |
| Yield strength, heat treated | ≥ 250 MPa |
| Elongation, heat treated | ≥ 10% |
| Hardness, heat treated | 100 HV1 |
| Thermal conductivity, heat treated | 181.5 W/(m·K) |
| Electrical conductivity | 23.2 %IACS as built · 43.1 %IACS heat treated |
| Relative density | 99.94% |
| Heat treatment | 250 °C, 2 hours |
| Thermal conductivity | 103 W/(m·K) |
Mechanical figures published by the manufacturer for this grade. Treat them as a starting point for your own qualification, not a guaranteed result on your machine.
Technical data
| Material | AlSi10Mg aluminum alloy |
| Designation | EN AC-43000 (AlSi10Mg) |
| Particle size (PSD) | 20–63 µm |
| Size distribution | D10 15–30 µm · D50 30–45 µm · D90 55–70 µm |
| Flow rate (Hall) | ≤ 90 s / 50 g |
| Apparent density | ≥ 1.1 g/cm³ |
| Tap density | ≥ 1.3 g/cm³ |
| Sphericity | ≥ 90% |
| Atomization | Gas-atomized |
| Oxygen | ≤ 0.10% |
| Brand | A-Powder by AO Metal |
| Country of origin | China |
| Package | 10 kg sealed container |
| Certificate | Lot certificate of analysis (COA) |
Typical parts
- Thermal management — heat exchangers, cold plates and manifolds.
- Housings and enclosures — thin-wall aluminium parts.
- Lightweight brackets — topology-optimized structures.
Representative LPBF parts in this alloy family.
Ordering A-Powder AlSi10Mg
- Made to order — we confirm the ship date by email after you order; if it does not suit you, we cancel and refund in full.
- One 10 kg sealed container per unit, 20–63 µm, with the certificate of analysis for the lot.
- 100 kg and more — ask for a volume quote.
- Card, PayPal or PO; a tax-exempt certificate is accepted.
Add to cart — $380 Request a volume quote
Good to know before you order
This lot is a 20–63 µm cut.
A-Powder supplies this AlSi10Mg in a 20–63 µm particle-size range, slightly coarser at the top end than the common 15–53 µm cut. Most LPBF systems run it well; if your machine or parameter set is tuned to a finer cut, ask our materials engineer first.
Made in China. If your program requires US- or allied-origin material (for example DFARS-compliant supply), see our Carpenter Additive alternative or ask our engineer.
Questions about A-Powder AlSi10Mg
What is A-Powder?
AO Metal’s own brand of LPBF metal powders, produced in China under an ISO 9001 quality system and sold and supported in the US by Additive Plus.
How is it packed and documented?
In a sealed 10 kg container, with the certificate of analysis for the lot — chemistry and particle-size data.
Will it run on my printer?
It is a 20–63 µm cut for open LPBF systems with AlSi10Mg parameters. Our materials engineer shares recommended starting parameters that you tune on your machine.
Can I order 100 kg or more?
Yes — request a volume quote and we reply with pricing and timing for your quantity.
| Brand | AO Metal |
| Technology | Metal LPBF |
| Powder Package | 10 kg, sealed drums |
| PSD (particle size distribution) | 20-63 micrometres |
| Printing Materials | Metal Powders |
| Material | AlSi10Mg |
| Country of origin | China |
| Production Method | Gas Atomization |
| Application | Composite Tooling, Engineering, Jigs & Fixtures, Manufacturing |
We atomize our own. Custom variants on request.
Tighter PSD, modified chemistry, custom blend? Our ATO atomization lab runs custom batches in 3–4 weeks. Biocompatible, refractory, proprietary — all in-house, verified before ship.
Complete the workflow
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
Immersion-separation industrial vacuum for reactive metal powder — aluminium, titanium and similar alloys — in 3D printing and powder handling. Captures powder under liquid so it's never a dry, ignition-sensitive cloud. ATEX-rated, antistatic, single-phase.
- ✓ For reactive AM powder (Al, Ti, Mg) — the safe alternative to a dry vacuum
- ✓ Two-stage antistatic filtration + grounded construction · ATEX docs on request
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
Hose and tools are not part of the standard configuration. The Delfin KT1006 accessory kit ($721) fits this 2-inch inlet: 10 ft hose, wand, floor brush and nozzle.
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 6–9 weeks — built to order · install + training included
A-Powder 316L — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
Other alloys in US stock now
Premium-grade LPBF powders, COA on request — add to cart or request a formal quote.
Carpenter Additive · Made in USAAluminum Alloy Powder AlSi10MgIn stock · ships in ~2 business days$815 / 10 kg · $81.50/kg
Carpenter Additive · Made in USAM300 Maraging Steel Powder for Metal 3D PrintingIn stock · ships in ~2 business days$1,210 / 10 kg · $121.00/kg
Carpenter Additive · Made in USAIN718 Nickel Alloy Powder for Metal 3D PrintingIn stock · ships in ~2 business days$985 / 10 kg · $98.50/kg
Amaero · Made in USATi64 Grade 23 (ELI) Titanium Alloy Powder for Metal 3D PrintingIn stock · ships in ~2 business days$2,405 / 10 kg · $240.50/kgCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What quantity do you sell — can I order a small amount?
Do you provide a Certificate of Analysis (COA)?
Place your order, or talk to an engineer first
Order A-Powder AlSi10Mg Powder for Metal 3D Printing | 20–63 µm LPBF – 10 kg / 22 lbs direct, or talk to materials engineer
