Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
QLS
ALTANA Cubic Ink High Temperature 1901 VP – High-Temp Tooling Resin (DLP/LCD/mSLA), HDT-B 272 °C | 1 kg & 5 kg
Easy-to-print DLP/LCD/mSLA resin with an HDT-B of 272 °C, superior chemical resistance and — unlike most high-temp resins — real toughness instead of brittleness.
- ✓ HDT-B 272 °C · Tg > 300 °C — holds geometry under sustained heat
- ✓ Tough, not brittle — drill, grind and machine without shattering
- ✓ Superior chemical resistance · cytotoxicity passed (ISO 10993)
- ✓ A similar alternative to Loctite IND147 for the same high-temp applications
Two bottle sizes: 1 kg — $193.80 · 5 kg — $159.60/kg (volume saving). Uncolored or Black. Invoiced per kg; USD reference.
$194
Price held 7 days after order.
What your process engineer actually checks
Heat data you can trust
The HDT-B 272 °C figure comes straight from the ALTANA TDS, verified on standard specimens. We help you match post-cure to the HDT your part actually needs.
A materials engineer on the line
Factory-trained support, not a remote ticket queue. We help you choose between HT 1901 and the Loctite IND147 grade we also stock. Sub-24h reply, NDA standard.
About this product
ALTANA Cubic Ink High Temperature 1901 VP is an easy-to-print DLP/LCD/mSLA resin with an HDT-B of 272 °C and strong chemical resistance — and, unusually for a high-temp resin, it stays tough instead of turning brittle.
Why engineers choose HT 1901 VP
Heat resistance that does not trade away toughness.
Heat that holds
HDT-B 272 °C and Tg > 300 °C. Parts keep their geometry against molten-material contact, high-pressure steam and sustained heat.
Tough, not brittle
4.8% elongation at break and 14 J/m notched Izod. Drill, grind and machine finished parts without shattering.
Superior chemical resistance
Under 0.5% mass gain across acids, bases, solvents and fuels after 24 h submersion — built for harsh service.
Clean regulatory profile
In-vitro cytotoxicity passed (ISO 10993-5/-12), low 0.4% water uptake, and 26 kV/mm dielectric strength for electrical parts.
See it in use
Printed HT 1901 parts — a fluidic manifold and translucent flanges.
Technical properties
Measured on uncolored resin (TDS v4, 13 Mar 2026). Post-cured 2×15 min UV @ 80 °C.
| Property | Value | Method |
|---|---|---|
| Viscosity (25 °C) | 230 mPa·s | DIN EN ISO 3219 |
| Density | 1.17 g/mL | DIN EN ISO 15212-1 |
| Ultimate tensile strength | 63 MPa | DIN EN ISO 527-5A |
| Tensile modulus | 2500 MPa | DIN EN ISO 527-5A |
| Elongation at break | 4.8 % | DIN EN ISO 527-5A |
| Flexural strength | 90 MPa | DIN EN ISO 178 |
| Flexural modulus | 2100 MPa | DIN EN ISO 178 |
| Izod, notched | 14 J/m | DIN EN ISO 180 |
| Shore hardness | 85 D | DIN EN ISO 7619 |
| Tg (TMA) | > 300 °C | TMA |
| HDT-A | 122 °C | DIN EN ISO 75 |
| HDT-B | 272 °C | DIN EN ISO 75 |
| Heat capacity (20 °C) | 0.96 J/(g·K) | DIN EN ISO 11357-4 |
| Dielectric strength | 26 kV/mm | IEC 60243-1 |
| Water uptake (24 h) | 0.4 % | Internal |
| In-vitro cytotoxicity | Passed | DIN EN ISO 10993-5/-12 |
| Flammability | UL 94 HB @ 3.2 mm | UL 94 |
| Colors | Uncolored / Black | — |
A similar option to Loctite IND147 High Temp
Same high-temp application class. Additive Plus stocks and supports both — a short technical comparison.
| Property | Loctite IND147 High Temp | Cubic Ink HT 1901 VP |
|---|---|---|
| HDT (0.45 MPa) | 290 °C | 272 °C |
| Ultimate tensile strength | 67 MPa | 63 MPa |
| Tensile modulus | 3200 MPa | 2500 MPa |
| Elongation at break | ~2 % | 4.8 % |
| Notched Izod | 15 J/m | 14 J/m |
| Shore hardness | 94 D | 85 D |
| Price (1 kg) | $260 | $193.80 |
Both are high-temperature, tough resins suited to the same tooling and molding applications. Additive Plus stocks and supports both, so you can compare and choose with guidance.
Print settings
Starting exposure by printer (Cubic Ink measured). Tune per geometry.
| Printer | Color | Layer | Bottom exp. | Default exp. |
|---|---|---|---|---|
| Prusa SL1S Speed (LCD, 405 nm) | Black | 50 µm | 10.0 s | 6.00 s |
| Formlabs Form 4 (LCD, 405 nm) | Uncolored / Black | 100 / 50 µm | 20.2 / 18.6 s | 0.69 / 0.44 s |
| Asiga Pro 4K80 (DLP, 385 nm) | Uncolored / Black | 100 / 50 µm | 2.3 / 22.2 s | 0.52 / 0.60 s |
Also validated on Phrozen 8K Mighty / Mega S. Wash 1–3 min (Cleaner 400 or IPA); post-cure UV at ≥80 °C, then thermal cure — e.g. +3 h at 150 °C raises HDT-B toward ~295 °C. Full parameters in the processing guide (download above).
Typical applications
Tooling · machinery · automotive · aerospace.
High-temp tooling
Molds, dies, fixtures
Injection-mold tooling
Inserts for short runs
Under-hood automotive
Heat-exposed parts
Aerospace test hardware
Elevated-temperature rigs
Machinery & fixtures
Durable functional parts
Electrical parts
High CTI > 600 V
How you run it
Print → wash → UV + thermal post-cure.
Step 01
LCD / DLP / mSLA. Validated on Formlabs Form 4, Asiga Pro 4K, Prusa SL1S and Phrozen 8K. Uncolored or black.
Step 02
Wash
1–3 min in Cubic Ink Cleaner 400 or IPA, then dry. Ultrasonic bath optional.
Step 03
Post-cure
Intense UV at ≥80 °C, then thermal post-cure (up to 130–150 °C) for full HDT. Black needs extra cure to avoid cracking.
Process guides and print settings for Formlabs, Asiga, Prusa, Phrozen and Nexa are available. Matching HDT, cost and toughness for your part? A materials engineer will help you compare HT 1901 and the Loctite IND147 grade we also stock. Sub-24h reply, NDA standard.
| Brand | ALTANA Cubic Ink |
| Available colors | Black, Uncolored |
| Print Feature | High Temp |
| Tensile Stress at Break (MPa) | 63 |
| Tensile Modulus (MPa) | 2500 |
| Elongation at Break (%) | 4.8 |
| Flexural Strength (MPA) | 90 |
| Flexural Modulus (MPa) | 2100 |
| IZOD Impact (Notched, J/m) | 14 |
| Shore Hardness (3s) | 85 |
| [email protected] MPA (°C) | 272 |
| HDT at 1.82 MPa | 122 |
| Tg °C | >300 |
| Heat Capacity J/(g*K) | 0.96 |
| Water Absorption (24hr) % | 0.4 |
Frequently bought together
Complete the workflow
QLS
ALTANA Cubic Ink Rigid 2000 VP – Rigid High-Strength Industrial Resin, HDT 122 °C (DLP/LCD/mSLA) | 1 kg & 5 kg
Easy-to-print all-round industrial resin with excellent rigidity, an HDT of 122 °C and outstanding chemical resistance — for functional prototypes and demanding industrial parts.
- ✓ 92 MPa tensile · 3600 MPa modulus · HDT-B 122 °C — stiff and heat-stable
- ✓ Outstanding chemical resistance (<1% mass gain) & 0.3% water uptake
- ✓ Post-machinable (drill, grind); long-term thermal stability
- ✓ A cost-effective alternative to Loctite IND249 High Temp
Two bottle sizes: 1 kg — $228.00 · 5 kg — $180.12/kg (volume saving). Invoiced per kg; USD reference.
From $228
Add to cart
Limited US stock (black) · other colors/sizes ship in ~10 business days
QLS
ALTANA Cubic Ink Mold 400 VP – Water-Breakable Casting & Injection-Molding Resin (DLP/LCD/mSLA) | 1 kg & 5 kg
Water-breakable One-Shot Mold (OSM) resin: 3D-print a sacrificial mold, cast or inject your real target material, then dissolve the mold in plain water — minimal swelling, clean automated release.
- ✓ One-Shot Mold tech — takes real fill temperature & pressure (up to 380 °C, 1200 bar)
- ✓ Breaks up completely in water, minimal swelling — no solvent, no mechanical breakout
- ✓ Compatible with silicones, epoxies, PU, PEEK, PPS, PA-GF and low-melt metals
- ✓ Always in stock · ships in ~2 business days
Two bottle sizes: 1 kg — $296.40 · 5 kg — $272.46/kg (volume saving). Invoiced per kg; USD reference.
From $296
Add to cart
In stock · ships in ~2 business days
QLS
ALTANA Cubic Ink Tough 2100 VP – Fast Functional Resin, Impact-Resistant & Tough (DLP/LCD/mSLA) | 1 kg & 5 kg
Fast, easy-to-print functional resin with a strong balance of toughness, impact resistance and HDT — robust enough for drilling, grinding and real functional parts.
- ✓ High impact resistance — 36 J/m notched Izod, 12% elongation, 380 J/m unnotched
- ✓ 73 MPa tensile · 2800 MPa modulus · 84 Shore D — stiff yet not brittle
- ✓ Post-machinable (drill, grind); uncolored, black & custom colors
- ✓ A cost-effective alternative to Loctite IND403 HDT80
Two bottle sizes: 1 kg — $159.60 · 5 kg — $129.96/kg (volume saving). Invoiced per kg; USD reference.
From $159
Add to cart
Limited US stock (black) · other colors/sizes ship in ~10 business days
Other products teams run alongside ALTANA Cubic Ink High Temperature 1901 VP – High-Temp Tooling Resin (DLP/LCD/mSLA), HDT-B 272 °C | 1 kg & 5 kg
3D Printed Parts & Models
Fun & Unique 3D Printed Toys – Fidgets, Miniatures & More
Unleash creativity and fun with our collection of 3D printed toys!
In stock
QLS
ALTANA Cubic Ink High Performance 4-4800 VP – Impact-Resistant Final-Part Resin (DLP/LCD/mSLA) | 1 kg & 5 kg
Highly impact-resistant, flexible final-part resin with good toughness, scratch resistance and heat resistance (HDT-B 90 °C), plus a clean regulatory profile.
- ✓ 44 J/m notched · 350 J/m unnotched Izod · 16% elongation — durable end-use parts
- ✓ HDT-B 90 °C, UV-stable, low water uptake, cytotoxicity passed (ISO 10993)
- ✓ Scratch-resistant; uncolored, black, blue, pink, grey
- ✓ A similar option to Loctite IND406 / 3843 for final-part production
Two bottle sizes: 1 kg — $250.80 · 5 kg — $228.00/kg (volume saving). Invoiced per kg; USD reference.
From $250
Add to cart
In stock
· Limited US stock (grey) · other colors/sizes ship in ~10 business days
3D Printed Parts & Models
Dynamic & Unique 3D Printed Wall Art – Moving Designs & Electronics
Transform your walls with cutting-edge 3D printed wall art that blends creativity, movement, and technology. Whether you want moving 3D printed wall art or intricate 3D print wall art with electronics, we offer unique designs to elevate any space.
In stock
QLS
ALTANA Cubic Ink Rigid 2000 VP – Rigid High-Strength Industrial Resin, HDT 122 °C (DLP/LCD/mSLA) | 1 kg & 5 kg
Easy-to-print all-round industrial resin with excellent rigidity, an HDT of 122 °C and outstanding chemical resistance — for functional prototypes and demanding industrial parts.
- ✓ 92 MPa tensile · 3600 MPa modulus · HDT-B 122 °C — stiff and heat-stable
- ✓ Outstanding chemical resistance (<1% mass gain) & 0.3% water uptake
- ✓ Post-machinable (drill, grind); long-term thermal stability
- ✓ A cost-effective alternative to Loctite IND249 High Temp
Two bottle sizes: 1 kg — $228.00 · 5 kg — $180.12/kg (volume saving). Invoiced per kg; USD reference.
From $228
Add to cart
In stock
· Limited US stock (black) · other colors/sizes ship in ~10 business days
QLS
ALTANA Cubic Ink Tough 2100 VP – Fast Functional Resin, Impact-Resistant & Tough (DLP/LCD/mSLA) | 1 kg & 5 kg
Fast, easy-to-print functional resin with a strong balance of toughness, impact resistance and HDT — robust enough for drilling, grinding and real functional parts.
- ✓ High impact resistance — 36 J/m notched Izod, 12% elongation, 380 J/m unnotched
- ✓ 73 MPa tensile · 2800 MPa modulus · 84 Shore D — stiff yet not brittle
- ✓ Post-machinable (drill, grind); uncolored, black & custom colors
- ✓ A cost-effective alternative to Loctite IND403 HDT80
Two bottle sizes: 1 kg — $159.60 · 5 kg — $129.96/kg (volume saving). Invoiced per kg; USD reference.
From $159
Add to cart
In stock
· Limited US stock (black) · other colors/sizes ship in ~10 business days
QLS
ALTANA Cubic Ink Rigid 300 VP High Resolution – Fine-Detail Precision Resin (DLP/LCD/mSLA) | 1 kg & 5 kg
Rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
- ✓ Ultra-thin layers & crisp XY resolution — fine-detail precision parts
- ✓ 37 MPa tensile · 1900 MPa modulus · 8% elongation — rigid yet not brittle
- ✓ Very low water uptake (0.3%) & strong chemical resistance
- ✓ Fast printing thanks to high reactivity
Two bottle sizes: 1 kg — $216.60 · 5 kg — $175.56/kg (volume saving). Invoiced per kg; USD reference.
From $216
Add to cart
In stock
· Made to order · ships in ~10 business days
QLS
ALTANA Cubic Ink Mold 400 VP – Water-Breakable Casting & Injection-Molding Resin (DLP/LCD/mSLA) | 1 kg & 5 kg
Water-breakable One-Shot Mold (OSM) resin: 3D-print a sacrificial mold, cast or inject your real target material, then dissolve the mold in plain water — minimal swelling, clean automated release.
- ✓ One-Shot Mold tech — takes real fill temperature & pressure (up to 380 °C, 1200 bar)
- ✓ Breaks up completely in water, minimal swelling — no solvent, no mechanical breakout
- ✓ Compatible with silicones, epoxies, PU, PEEK, PPS, PA-GF and low-melt metals
- ✓ Always in stock · ships in ~2 business days
Two bottle sizes: 1 kg — $296.40 · 5 kg — $272.46/kg (volume saving). Invoiced per kg; USD reference.
From $296
Add to cart
In stock
· In stock · ships in ~2 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What temperature can HT 1901 VP withstand?
It has a heat deflection temperature (HDT-B) of 272 °C and a glass transition temperature above 300 °C. Depending on post-cure, HDT can be pushed toward ~290 °C. It is designed for sustained high-heat tooling and molding.
Is it brittle like other high-temp resins?
No — that is the point of the material. It keeps 4.8% elongation at break and 14 J/m notched Izod, so parts can be drilled, ground and machined without shattering.
How does it compare to Loctite IND147 High Temp?
Both are high-temperature, tough resins suited to the same tooling and molding applications, with comparable HDT (272 vs 290 °C). Additive Plus stocks and supports both Cubic Ink HT 1901 ($193.80/kg) and Loctite IND147 ($260/kg), so you can compare and choose with guidance.
Is it safe for skin-contact or medical-adjacent parts?
The cured material passed in-vitro cytotoxicity testing (ISO 10993-5/-12) and has a favorable regulatory profile. The liquid resin must be handled with proper PPE until fully cured; an SDS ships with every order.
Which printers and colors are available?
Open LCD, DLP and mSLA systems, validated on Formlabs Form 4, Asiga Pro 4K, Prusa SL1S and Phrozen 8K. Available uncolored or black; note that black should not be printed above 50 µm layers.
How is it washed and cured?
Wash 1–3 minutes in Cubic Ink Cleaner 400 or IPA. Post-cure with intense UV at ≥80 °C, followed by a thermal post-cure up to 130–150 °C to reach full heat resistance.
Place your order, or talk to an engineer first
Order ALTANA Cubic Ink High Temperature 1901 VP – High-Temp Tooling Resin (DLP/LCD/mSLA), HDT-B 272 °C | 1 kg & 5 kg direct, or talk to materials engineer