Made to order

Zetasinter Chamber — Air Sintering Furnace, 15 L

With every system

Install, operator training, and validated process settings
Tailored warranty with same-week dispatch on critical issues

Engineering, Manufacturing, Other Equipment, Post-Processing Equipment

Zetasinter Chamber — Air Sintering Furnace, 15 L

Zetasinter Chamber sinters printed ceramic parts in ambient air, up to 1600 °C.

✔ Sinters in ambient air — no gas supply, no atmosphere control to manage
✔ 1600 °C maximum: alumina at 1550 °C, white and black zirconia at 1475 °C
✔ 250 × 250 × 250 mm chamber takes real parts, not only test pieces

Freight and installation requirements confirmed with you before the order is placed.

$18,200

Prices follow supplier cost and stock availability and are updated regularly. The price you see is today's price — once you order, it's held for 7 days.

Install + training included Tailored service plan

Full stackgreen part to qualified part

<24engineer response

Demo firstbefore you commit

Same-weekservice dispatch

What to confirm before installation

Air sintering for ceramics

Zetasinter Chamber sinters printed ceramic parts in ambient air up to 1600 °C, with no gas supply and no atmosphere control to manage. It fires alumina at 1550 °C and white and black zirconia at 1475 °C. The 250 × 250 × 250 mm chamber holds a capacity of 15 litres, so it takes real parts rather than only test coupons.

We confirm your setup first

At 18 kW the Chamber needs an electrical supply planned in advance, and a fume hood is recommended. Tell us your site conditions and we confirm the power feed, the fume hood and the furnace cycle with the manufacturer before you order, so the delivered unit matches your bench rather than an assumption.

About this product

Zetasinter Chamber sinters printed ceramic parts in ambient air, up to 1600 °C. It is the furnace for alumina, zirconia and the rest of the Zetamix ceramic range, with a chamber large enough for parts rather than coupons.

Why this furnace

Air sintering to 1600 °C in a chamber sized for real parts.

Air sintering

Sinters in ambient air — no gas supply, no atmosphere control to manage.

1600 °C maximum

Alumina at 1550 °C, white and black zirconia at 1475 °C.

250 mm chamber

A 250 × 250 × 250 mm chamber takes real parts, not only test pieces.

For the ceramic range

The furnace for alumina, zirconia and the rest of the Zetamix ceramic range.

Order, install and run

At 18 kW the electrical supply is the item to plan first.

Step 01

Quote and freight

Delivered price is confirmed at quotation — freight on a furnace depends on crate size and destination.

Step 02

Install

At 18 kW the furnace needs an electrical supply planned in advance and a fume hood is recommended. Manufacturer training at your site is a separate option.

Step 03

Sinter

Fire alumina at 1550 °C or white and black zirconia at 1475 °C, up to 1600 °C in ambient air.

Materials it sinters

Ambient-air ceramics from the Zetamix range.

Alumina

Sinter at 1550 °C

White & black zirconia

Sinter at 1475 °C

Zetamix ceramics

Full ceramic range

Specifications

Process: sintering of ceramics in ambient air
Maximum temperature: 1600 °C
Sintering temperatures: alumina 1550 °C, white and black zirconia 1475 °C
Chamber dimensions: 250 × 250 × 250 mm
Capacity: 15 litres
Power: 18 kW
Dimensions (H×W×D): 1120 × 605 × 860 mm
Fume hood installation recommended

What you get and how you buy

Genuine Zetamix by Nanoe, supplied and invoiced from California in USD
Operating manual and furnace cycle guide from the manufacturer
Manufacturer training at your site available as a separate option
Delivered price confirmed at quotation — freight on a furnace depends on crate size and destination

Before you order

At 18 kW this furnace needs an electrical supply planned in advance, a fume hood is recommended for extraction, and delivered price and freight are confirmed at quotation. Tell us your site conditions and we will confirm what is required before you order. This is the air-sintering ceramic furnace; to sinter printed metal parts under argon see the Zetasinter 4L, or for a smaller air-sintering footprint see the Zetasinter Chamber Mini.

Tell us your parts, ceramics and site power and an applications engineer will confirm the furnace cycle and installation requirements before you order.

Equipment type	Air sintering furnace
Brand	Zetamix by Nanoe

Common questions

Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.

What materials and atmosphere does the Zetasinter Chamber run?

The Zetasinter Chamber sinters printed ceramic parts in ambient air, so it needs no gas supply and no atmosphere control to manage. It covers the Zetamix ceramic range, including alumina and both white and black zirconia. Because it fires in open air rather than under inert gas, it differs from the metal-focused Zetasinter 4L, which runs under argon. This makes the Chamber straightforward to site: there is no gas line to plumb, only power and extraction to plan. The 15-litre chamber suits labs moving from coupons to full parts across the alumina and zirconia grades that Zetamix supports.

What temperature and capacity does the Zetasinter Chamber reach?

The Zetasinter Chamber reaches a maximum of 1600 °C in ambient air. In practice it sinters alumina at 1550 °C and white and black zirconia at 1475 °C, so it has headroom above the grades most users run. Its chamber measures 250 × 250 × 250 mm, giving a capacity of 15 litres, which takes real parts rather than only test pieces. That volume lets you fire a batch or a larger single component in one run. The margin between the 1600 °C ceiling and the 1550 °C alumina cycle keeps the elements off their limit during routine work, which supports steadier long-term operation.

What power and utilities does the Zetasinter Chamber need?

The Zetasinter Chamber draws 18 kW, so it needs an electrical supply planned in advance rather than a standard workshop socket. The unit measures 1120 × 605 × 860 mm, so allow floor space and a stable base. A fume hood is recommended over the furnace to handle output during firing. Because it sinters in ambient air, there is no gas supply to route, which simplifies siting compared with an atmosphere furnace. We confirm the 18 kW feed, the extraction and the furnace cycle with you and with the manufacturer before the order is placed, so the electrical and ventilation work is scoped before the unit arrives.

What are the install requirements and lead time for the Zetasinter Chamber?

Before installing the Zetasinter Chamber, plan the 18 kW electrical supply and a fume hood, which the manufacturer recommends over the unit. Allow for a 1120 × 605 × 860 mm furnace on a stable base. No gas line is needed, since it sinters in ambient air. The Chamber ships from California as genuine Zetamix by Nanoe, supplied and invoiced in USD, with an operating manual and furnace cycle guide included. Manufacturer training at your site is available as a separate option. Delivered price and lead time are confirmed at quotation, since freight on a furnace depends on crate size and destination rather than a fixed figure.

Place your order, or talk to an engineer first

Order Zetasinter Chamber — Air Sintering Furnace, 15 L direct, or talk to materials engineer

Add to cart