Equipment
Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.
- ✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
- ✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
- ✓ 3DMIX paste for the 3DCeram Ceramaker, 0.5 L container — buy 5 or more containers and save 15% (applied automatically in your cart)
Made to order
· Made to order by 3DCeram in France — typically ships in 3–4 weeks; exact lead time confirmed with your order.
xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.
- ✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
- ✓ Compatible with thousands of commercial injection materials, including reinforced grades
- ✓ Fully dissolvable — undercuts and internal features release without side actions
- ✓ Genuine Nexa3D · 5 kg · in stock — ships in 5–15 business days
Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →
In stock
· 5–15 Business Days
Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.
- ✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
- ✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
- ✓ 3DMIX paste for the 3DCeram Ceramaker, 0.5 L container — buy 5 or more containers and save 15% (applied automatically in your cart)
Made to order
· Made to order by 3DCeram in France — typically ships in 3–4 weeks; exact lead time confirmed with your order.
Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.
- ✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ 3DMIX paste for the 3DCeram Ceramaker, 0.5 L container — buy 5 or more containers and save 15% (applied automatically in your cart)
Made to order
· Made to order by 3DCeram in France — typically ships in 3–4 weeks; exact lead time confirmed with your order.
The Shining 3D FreeScan Combo is a dual-mode handheld 3D scanner combining blue laser and infrared VCSEL in a 620 g package, achieving up to 0.02 mm accuracy for metrology, reverse engineering and inspection.
- ✓ Up to 0.02 mm accuracy in laser modes — tested to VDI/VDE 2634 & ISO 10360 in Shining 3D’s ISO 17025 lab
- ✓ Dual light source — 26-line blue laser + marker-free infrared VCSEL in one device
- ✓ Four scan modes — deep bores to large assemblies without switching hardware
- ✓ 1-year Shining 3D warranty · authorized Shining 3D reseller in the US
- ✓ Ship date confirmed by email after you order
Made to order
· Ship date confirmed by email after you order
Handheld laser scanner with a 98-line marker-free mode and 0.02 mm accuracy with markers — Deep Hole Scan for holes, deep pockets, and fin walls.
- ✓ 98 laser lines for marker-free scanning of feature-rich parts
- ✓ Up to 3,010,000 points/s scan rate, point distance 0.01–3 mm
- ✓ Deep Hole Scan with 26 or single laser line
- ✓ 1-year Shining 3D warranty
- ✓ Ship date confirmed by email after you order
Made to order
· Ship date confirmed by email after you order
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for automotive panels, one-piece patterns, dental models, and architectural forms — without stitching or Z-seam artifacts.
- ✓ 1000 × 1000 × 600 mm build chamber — a full bumper fascia or a batch of shoe lasts in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for long single-piece parts — automotive patterns, extended trim, one-piece molds — without stitching or Z-seam artifacts.
- ✓ 47×32×24 in / 1200×800×600 mm build chamber — a full-length bumper pattern in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.Not sure which system fits?
Tell us your application. We'll send our top recommendation.
Browse all categories
Printers, materials, print services and lab equipment — including AO Metal, the LPBF printer we design and build ourselves.
Have a CAD? Have a quote in 24h.
Upload your file or talk to an engineer — no obligation, no spam, NDA on request. First-time customers get free DfAM review.