Packaging

Showing 1–8 of 129

FibreSeeker · FFF

FibreSeeker 3 — Continuous Carbon Fiber 3D Printer

Desktop continuous-fiber 3D printer for load-bearing parts that replace machined aluminum.

In stock in the US — ship date confirmed by email after you order.
1-year warranty in every bundle · 2 years with Pro and Enterprise
US service from Starter up · support line +1 (747) 800-4854

Build 11.81×11.81×9.65 in, 300×300×245 mm

Prints PLA, Carbon Fibre X-CCF, Glass Fibre X-CGF, Glass-filled Nylon PACF, Glass-filled PETG PETGF, PA Filament, PC, PETG

From $2,699

Get quote

In stock

· In stock · ships from the US

APSX · PIM (Plastic Injection Molding)

APSX-PIM V3 Desktop Injection Molding Machine – 5-Ton Clamp | 30 cc Shot | Engineering Resins

5-ton (11,000 lbf) desktop injection molder — 1.83 cu-in / 30 cc shot, up to 626°F / 330°C, running PC, nylon, ABS, PP and other engineering thermoplastics on standard or custom aluminum molds.

✓ Fully automatic multi-mode with ejector molds — ~60 s cycle; manual single-mode with the included test mold
✓ Runs on a standard 115 V (US) or 230 V (EU) outlet — 250 lb benchtop footprint, mold swap in ~15 min
✓ Lead time: ships in about 1 week — made in Cincinnati, OH, with US-based support

From $13,500

Get quote

In stock

· About 1 week

3D Lab

ATO Passivation Module

The ATO Passivation Module is an automated safety system that passivates reactive metal powder — dosing controlled oxygen into the sealed container to build a protective oxide layer before it is opened.

✓ Controlled oxygen dosing builds a uniform protective oxide layer
✓ No ignition or explosion risk when the container is opened
✓ Automated, hands-off 1–2 hour cycle · works with ATO containers
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Pure | Ultrasonic Metal Powder Cleaning & Drying System

ATO Pure is an ultrasonic cleaning-and-drying station that reconditions used or freshly atomized metal powder — removing sub-5 µm fines, surface films and moisture, then drying it for reuse.

✓ Ultrasonic cleaning + integrated drying in one automated cycle
✓ Removes ultra-fine particles while preserving particle sphericity
✓ Recovers degraded powder — extends lifecycle, cuts material cost
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

3D Lab · Ultrasonic atomization

ATO Wipe | Ultrasonic Feedstock Cleaning System for Metal Powder Production

ATO Wipe is an ultrasonic wire-and-rod cleaning station that prepares feedstock for ultrasonic atomization — stripping oils, oxides and residues before the metal reaches the melt.

✓ Ultrasonic + mechanical brushing for deep surface decontamination
✓ Wire and rod compatible · automatic and manual modes
✓ Native to the ATO suite — feeds ATO Lab Plus, ATO Sparq and rod feeders
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

3D Lab

ATO Multi Rod Feeding System

The ATO Multi Rod Feeding System feeds multiple round rods — 4 to 10 mm diameter in self-locking collets, up to 1200 mm total length — into an ATO ultrasonic atomizer for longer, less-attended runs.

✓ Up to 1200 mm total rod length in an extended tube container
✓ Round rods 4–10 mm in self-locking collets (4, 6, 8, 10 mm)
✓ Longer runs, fewer reloads than single-rod feeding
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

3D Lab

ATO Single Rod Feeding System

The ATO Single Rod Feeding System feeds rod feedstock — 1 to 10 mm diameter, up to 110 mm long, including cast rods — directly into an ATO ultrasonic atomizer.

✓ Atomizes rods 1–10 mm diameter (best on 4–6 mm), up to 110 mm long
✓ Works with cast rods — atomize as-cast alloys directly
✓ Upgradeable to a Custom Shape Feeder for non-standard feedstock
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

3D Lab

ATO Wire Feeding System

The ATO Wire Feeding System feeds wire feedstock into an ATO ultrasonic atomizer in a continuous, automated process — for reactive and non-reactive alloys, using standard welding-market wire.

✓ Continuous, automated wire feed for stable powder output
✓ Long-spool compatibility — fewer changes, higher uptime
✓ Accepts standard welding-market wire — no feedstock lock-in
✓ Lead time: configured to order — request current lead time

Get quote

Made to order

· Configured to order — request lead time

Have a CAD? Have a quote in 24h.