In stock
- COA on request — PSD, sphericity, flow rate, chemistry
- Mutual NDA before any file or spec review
304/304L Stainless Steel Powder for EBM — 45–106 µm, 10 kg
304 powder price: $265 per 10 kg ($26.50/kg)
Low-carbon austenitic stainless steel in the coarse 45–106 µm cut for electron-beam powder bed systems. Good corrosion resistance, especially against intergranular corrosion; non-magnetic when annealed. Made by Carpenter Additive (PowderRange 304L).
Values from the Carpenter PowderRange 304L datasheet.
Which 304/304L is right for your build?
All of them are in our catalog at a published price. Pick by machine, timing and country of origin.
| Powder | Particle size | Origin | Availability | Good fit for | 10 kg | |
|---|---|---|---|---|---|---|
 Carpenter Additive 304L FFine cut | 15–45 µm · LPBF | Confirmed per lot | In stock | Laser powder bed fusion | $545 | View |
 Carpenter Additive 304L EThis page | 45–106 µm · EBM | Confirmed per lot | In stock | Electron-beam powder bed systems | $265 | Add to cart |
Need a specific country of origin for a government or defense program? Ask before ordering and we will confirm it in writing for your lot.
What is in the container
Specification from the manufacturer. The certificate for your lot is available on request.
Specification
Type analysis, PowderRange 304L datasheet (Carpenter Additive). Single figures are maximum except where noted.
| Element | wt% |
|---|---|
| Iron (Fe) | Balance |
| Chromium (Cr) | 18.0–20.0 |
| Nickel (Ni) | 8.0–11.0 |
| Manganese (Mn) | 2.0 |
| Silicon (Si) | 1.00 |
| Copper (Cu) | 0.75 |
| Molybdenum (Mo) | 0.75 |
| Phosphorus (P) | 0.040 |
| Carbon (C) | 0.030 |
| Sulfur (S) | 0.030 |
| Powder property | Requirement |
|---|---|
| Particle size | 45–106 µm cut; the datasheet lists only the 15–45 µm F cut, so limits for this cut are on the lot certificate |
| D10 / D50 / D90 | measured and reported on the lot certificate |
| Melting and atomization | Nitrogen gas atomized |
What comes with your lot
From the manufacturer certificate
- Chemistry against the specification limits on the left
- Particle size distribution: D10, D50, D90
- Flow rate and apparent density
- Lot number for traceability
The certificate for your lot is available on request. The manufacturer datasheet for this alloy has no particle image; ask us if you need one.
How the printed metal performs
Carpenter does not publish printed-property data on the datasheet for this alloy. Ask our materials engineer for available data, or qualify the alloy on test coupons from your machine.
Heat treatment
Carpenter datasheet, process guidance
- 304L cannot be strengthened by heat treatment.
- Solution anneal to improve corrosion resistance; the datasheet does not give a schedule, so follow your specification.
- Non-magnetic in the annealed condition.
- Finishing: machining, abrasive flow machining, shot peening, grinding, polishing and chemical milling all work.
How this 304L compares
Published tensile data, X–Y direction unless noted, one representative condition per alloy. Conditions differ, so use this to shortlist, not to design.
Will it run on my printer?
The 45–106 µm E cut is made for electron-beam powder bed fusion and powder-fed directed energy deposition. For laser powder bed fusion, use the 15–45 µm F cut listed above. Check the particle-size range your machine maker specifies.
Store sealed
Keep the container closed, dry and at room temperature until you load the printer.
Sieve
Sieve before loading and every time you reuse powder recovered from a build.
ATO Sieve · quoteLoad
Fill the hopper or powder feeder and run your machine’s vacuum or inert-gas procedure.
Print and relieve
Stress-relieve on the plate, then remove parts and supports.
Recover
Collect unfused powder, sieve it and return it to a sealed container.
Delfin Mistral 451 BL D2 — ATEX metal powder vacuum · $7,175Wear a respirator, gloves and eye protection when handling metal powder. Read the safety data sheet before first use.
Printed on AO Metal
Real builds on the LPBF printers we sell, and what teams make from this alloy.
Parts printed on AO Metal printers, which we sell. Alloys, parameters and powder lots differ from part to part; these photos show the process, not parts made from this specific powder lot.
- Medical devices
- Chemical processing equipment
- Water and boiler components
Applications as listed by Carpenter Additive for PowderRange 304L.
Ordering, delivery and our promise
10 kg of 45–106 µm powder, sealed, traceable to its Carpenter lot certificate.
The ship date shows next to the Add to Cart button. Shipping cost is calculated at checkout.
Card or PayPal at checkout, an invoice, or a purchase order — choose how you buy next to Add to Cart.
100 kg and more: ask for a volume quote with your alloy, quantity and ship-to.
If the powder is not right, we make it right.
If your lot’s chemistry or particle size falls outside its certificate or this page, or it arrives damaged or wrong, tell us within 14 days of delivery. We replace it or refund you, and we pay for shipping both ways.
Complete the workflow
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
- ✓ Conductive / antistatic build — no static build-up around ignition-sensitive powder
- ✓ For stainless, nickel & non-reactive AM powder — reactive metals need the inert unit
- ✓ In US stock · ships in 2 business days · genuine Delfin unit · ATEX docs on request
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 4–8 weeks — built to order · install + training included
Corrosion-resistant. Biocompatible. Production-ready. Genuine Carpenter PowderRange® 316L austenitic stainless steel for LPBF, EBM & DED metal 3D printing.
- ✓ Gas-atomized, low-oxygen — COA on request
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ In US stock — ready to ship
Other alloys in US stock now
Premium-grade LPBF powders, COA on request — add to cart or request a formal quote.
Carpenter Additive · Made in Sweden316L Stainless Steel Powder for Metal 3D PrintingIn stock · ships in ~2 business days$670 / 10 kg · $67.00/kg
Carpenter Additive · Made in USA15-5 Stainless Steel Powder for Metal 3D PrintingIn stock · ships in ~2 business days$570 / 10 kg · $57.00/kg
Carpenter Additive · Made in USA304 Stainless Steel Powder for Metal 3D PrintingIn stock · ships in ~2 business days$545 / 10 kg · $54.50/kg
Carpenter Additive · Made in AustriaAluminum Alloy Powder AlSi10MgIn stock · ships in ~2 business days$815 / 10 kg · $81.50/kgCommon questions
Don't see yours? Email [email protected] — NDA on request.
Is this 304L stainless steel powder powder for laser powder bed fusion (LPBF)?
What is PowderRange 304L stainless steel powder (45–106 µm)?
Can 304L stainless steel be heat treated to make it stronger?
Which processes and shielding gas does 304L powder work with?
What is the difference between 304L and 316L powder?
Does 304L stainless steel powder come with a certificate of analysis?
How fast does 304L stainless steel powder ship, and how can I pay?
Place your order, or talk to an engineer first
Order 304 Stainless Steel Powder for EBM | 45–106 µm - 10 kg / 22 lbs direct, or talk to materials engineer