In stock
Nexa3D Replacement Air Filters for XiP – Activated-Carbon Set
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
$53
Looking for Nexa3D resins? They are discontinued. See current replacements →
Uncured resin has a smell, and the XiP’s airflow is what keeps it in check. These activated-carbon filters adsorb resin odour and VOCs as air passes through the printer — swap them on a schedule and the chamber and the room around it stay noticeably cleaner.
Compatibility & Specifications
- Type: activated-carbon air filter set
- Function: captures resin odour and VOCs from the printer’s internal airflow
- Compatible printer: Nexa3D XiP desktop printer (not XiP AiR cartridge or XiP Pro filters)
- Part: genuine Nexa3D XiP consumable (XIP_FILTERS)
- Replace when: odour increases or per your maintenance interval
Why Source Through Additive Plus
Genuine Nexa3D consumables, stocked in the US and shipped in about two business days. We support the XiP, so you get the right filter for the right unit — no guessing between the XiP, XiP AiR and XiP Pro. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D Replacement Air Filters for XiP – Activated-Carbon Set
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.
- Two pneumatic heads, independent pressure for each cartridge
- Independent heating up to 60 °C for each cartridge
- Shared UV 365/405 nm · 120 °C glass platform kept
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
Made to order
· Ships in 2–3 weeks
The genuine Nexa3D Everlast-1 membrane keeps your XiP Pro producing consistent parts at industrial volume.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — even resin replenishment for repeatable parts, build after build
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
A fresh membrane on schedule is the cheapest insurance against downtime.
In stock
· 5–15 Business Days
Replacement light-engine protective glass for Nexa3D NXE printers with the LE5 light engine (NX Pro generation). The glass shields the projector optics from resin and debris; a scratched or fouled pane scatters light and softens prints, so swapping it restores clean projection.
- ✓ Protective glass for the NXE LE5 / NX Pro light engine
- ✓ Match your light-engine generation before ordering (LE1–LE4 uses a different kit)
- ✓ Genuine Nexa3D kit (P/N 12018) · currently on backorder — contact us for lead time
Out of stock
· Out of stock — send us a request and we will check availability
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business daysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer are these air filters for?
What do the filters actually do?
How often should they be changed?
Place your order, or talk to an engineer first
Order Nexa3D Replacement Air Filters for XiP – Activated-Carbon Set direct, or talk to materials engineer