Made to order
- Validated cure profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
Loctite 3D 3955 HDT280 FST - Black 1 kg
Aerospace-certified black resin: Halogen-free UL94-V0, passes Airbus FST. Extreme HDT300°C for flight parts.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
$360
What your process engineer actually checks
Validated, load-and-print cure profiles
Every resin ships with a tested exposure/cure profile for the printers we sell and a datasheet covering viscosity, cure energy, mechanical properties, and shelf life. Dial the build in once, reorder the same chemistry.
An materials engineer on the line
Questions on layer adhesion, post-cure schedules, elongation, yellowing, or chemical resistance? A materials engineer answers directly. Most replies in under 4 hours, NDA on request.
LOCTITE 3D 3955 FST Black: The Aerospace-Grade Flame-Retardant Resin Redefining Flight Safety
As the first 3D printable photopolymer to pass stringent Airbus AITM standards (2-0002, 2-0007, 3-0005) and UL94 V-0 certification, LOCTITE 3955 FST Black delivers unmatched fire safety for critical aerospace, rail, and automotive applications. With a record-breaking heat deflection temperature exceeding 300°C at 0.455 MPa, this halogen-free material withstands extreme environments where traditional polymers fail.
Applications
Aerospace
-
Cockpit HVAC ducts
-
Engine bay clip fasteners
-
Cabin connector housings
Rail & Automotive
-
EV battery thermal barriers
-
High-speed train interior panels
-
Under-hood sensor mounts
Why Engineers Specify 3955
-
Replace Metals: 68% weight reduction vs. titanium fasteners
-
Accelerate Certification: Pre-validated to FST/UL/IEC standards
-
Eliminate Halogens: Zero bromine/chlorine emissions during fires
-
Extreme Environment Proven: Stable after 6-week salt spray (ASTM B117)
Storage: 8-30°C in sealed containers | Shelf life: 12 months
Industry First: The only photopolymer qualifying for permanent Airbus interior components.
| Brand | Henkel Loctite |
| Available colors | Black |
| Print Feature | High Temp, Rigid |
| Young's Modulus (MPa) | 3556 ± 194 |
| Tensile Stress at Yield (MPa) | 66.7 ± 4.7 |
| Elongation at Yield % | 2.2 ± 0.2 |
| Tensile Stress at Break (MPa) | 65.5 ± 5.4 |
| Elongation at Break (%) | 2.1 ± 0.3 |
| Poisson’s Ratio | 0.32 ± 0.02 |
| Flexural Modulus (MPa) | 4643 ± 228 |
| Shore Hardness (3s) | 82 |
| IZOD Impact (Notched, J/m) | 22.5 ± 2.8 |
| Solid Density g/cm3 | 1.39 |
| Heat Capacity J/(g*K) | 1.5 |
| Viscosity at 25°C (77°F) cP | 710 - 960 |
| Liquid Density g/cm³ | 1.26 |
| [email protected] MPA (°C) | >300 |
| HDT at 1.82 MPa | 214 |
| Resin Type | High-temp, Rigid |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We formulate and qualify. Custom variants on request.
Need a tuned resin, a filled or castable formulation, or a profile for a printer we don't list yet? Our materials team qualifies custom formulations and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside Loctite 3D 3955 HDT280 FST - Black 1 kg
Implant-grade. Biocompatible. Wear-resistant. Genuine Carpenter PowderRange® CCM cobalt-chrome (CoCrMo, ASTM F75) for DED & EBM metal 3D printing, in the coarser E cut (45–106 µm).
- ✓ VIM-melted, nitrogen gas-atomized — COA on request
- ✓ Excellent biocompatibility & non-magnetic (MRI-safe)
- ✓ Sold in small, workable volumes · in US stock, ready to ship
In stock
· In US stock · ready to ship
Made to order
· Express 2–3 wks · Standard 6–8 wks
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
Made to order
· Express 2–3 wks · Standard 6–8 wks
Chemical- and fatigue-resistant PP pellets qualified for large-format additive manufacturing (LFAM) — light, low-moisture big parts and living-hinge components at pellet cost, unreinforced or glass-fiber reinforced.
- ✓ Broad chemical resistance and living-hinge fatigue behavior — light and low-moisture
- ✓ Ships sealed with a lot datasheet + adhesion and cooling parameters for warp control
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
High-temp. Corrosion-proof. Non-magnetic. Genuine Carpenter PowderRange® 625 (Inconel® 625) nickel superalloy for DED & EBM metal 3D printing, in the coarser E cut (45–106 µm).
- ✓ Strength & corrosion resistance to 2000°F (1093°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on request · in US stock, ready to ship
In stock
· In US stock · ready to ship
- ✓ ESA/ESTEC-verified: 423 MPa flexural strength, 82 W/m-K thermal conductivity
- ✓ Solid-state sintered to 2100°C — dense, chemically inert, no powder bed
- ✓ Qualified for the 3DCeram M.A.T. platform — quote-based pricing, request a quote
In stock
· Contact for lead time
High strength. Heat-treatable. Production-ready. Genuine Carpenter PowderRange® 17-4PH precipitation-hardening stainless steel for LPBF metal 3D printing.
- ✓ Vacuum-melted, nitrogen gas-atomized — COA on request
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Out of stock — next lot expected in November
Out of stock: the next Carpenter lot is expected in November.
Out of stock
· Out of stock · next lot expected in November
- 10 kg sealed package · $75/kg · in stock
- Fine ~50 µm powder · narrow PSD · high reusability
- Materials engineer on call · setup recommendations · NDA on request
For CO₂ / infrared SLS systems · order direct below or talk to an engineer first.
In stock
What our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Place your order, or talk to an engineer first
Order Loctite 3D 3955 HDT280 FST - Black 1 kg direct, or talk to materials engineer