Made to order
- Validated cure profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
Loctite 3D IND475 A60 High Rebound White1 kg
White elastomer resin: High rebound & tear resistance for lattices/prototypes. Easy printing.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
$225
What your process engineer actually checks
Validated, load-and-print cure profiles
Every resin ships with a tested exposure/cure profile for the printers we sell and a datasheet covering viscosity, cure energy, mechanical properties, and shelf life. Dial the build in once, reorder the same chemistry.
An materials engineer on the line
Questions on layer adhesion, post-cure schedules, elongation, yellowing, or chemical resistance? A materials engineer answers directly. Most replies in under 4 hours, NDA standard.
Engineered for applications demanding true elastic recovery, LOCTITE 3D IND475 redefines high-performance elastomers with unprecedented energy return properties. This industrial-grade UV resin cures into a fatigue-resistant material that delivers 98% rebound efficiency – outperforming conventional rubbers in cyclic applications while maintaining exceptional tear resistance.
Breakthrough Elastic Performance
-
Instant Energy Recovery: 0.2-sec snap-back response for vibration damping and impact absorption
-
True Elastomeric DNA: Mimics injection-molded rubber behavior with 400% elongation at break
-
Zero Post-Processing: Fully functional straight off the print bed – no thermal curing required
Industry-Specific Applications
Automotive
-
Engine vibration dampeners
-
EV battery seal gaskets
-
Door seal prototypes
Industrial
-
Pneumatic actuator membranes
-
Conveyor system bumpers
-
Robotic contact pads
Consumer Tech
-
Wearable device seals
-
Haptic feedback components
-
Shock-absorbing soles
Technical Superiority in Production
-
Void-Free Printing: Low viscosity (120 cP) enables intricate lattice structures
-
Micro-Tolerance Accuracy: ±25μm dimensional stability across prints
-
Cross-Platform Compatibility: Optimized for 385-420nm DLP/SLA systems
Sustainability Edge: 30% reduced material waste vs. traditional gasket manufacturing methods
| Brand | Henkel Loctite |
| Available colors | White |
| Print Feature | Flex |
| Young's Modulus (MPa) | 1.1 ± 0.5 |
| Tensile Stress at Break (MPa) | 3.1 ± 0.3 |
| Elongation at Break (%) | 201 ± 16 |
| Shore Hardness (3s) | 62 |
| Water Absorption (72hr) % | 4.5 + 0.1 |
| Solid Density g/cm3 | 1.06 |
| Heat Capacity J/(g*K) | 0.41 ± 0.01 |
| Viscosity at 25°C (77°F) cP | 900-1700 |
| Liquid Density g/cm³ | 1.00 |
| Resin Type | Flexible |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We formulate and qualify. Custom variants on request.
Need a tuned resin, a filled or castable formulation, or a profile for a printer we don't list yet? Our materials team qualifies custom formulations and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside Loctite 3D IND475 A60 High Rebound White1 kg
In stock
· 1–2 Business Days
Dynamism PVA 2.85mm water-soluble support filament for dual-extrusion FDM — dissolves cleanly in plain water to release complex geometries, internal channels, and deep overhangs, with strong adhesion to PLA, nylon, TPU, PVB, and PETG.
- ✓ Dissolves in plain water — no solvents, no scarring
- ✓ Bonds to PLA, nylon, TPU, PVB & PETG (dual-extrusion)
- ✓ 2.85mm · 1kg · sealed with desiccant
Made to order
· On backorder — contact us for current lead time.
Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.
- ✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 10 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 10 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
Strong. Biocompatible. No preliminary cast. KeyTray prints custom individual impression trays straight from the digital scan — Class I biocompatible, with 85 MPa flexural strength and Shore D 86 so the tray survives seating and removal from an undercut without distorting the impression. Compatible with all impression materials; compound waxes and border-molding materials adhere as they would to a conventional tray.
1 kg bottle, translucent blue. Currently out of stock — contact us for the next lot date.
Out of stock
· Out of stock — contact us for the next lot date
Carbon-fiber PLA filament for FDM 3D printing — high stiffness (6320 MPa flexural modulus) and a matte, professional finish with PLA-easy printing, for rigid jigs, fixtures, drone and RC parts, and technical display models.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
- PLA filament for FibreSeeker 3 — fast prototypes and fiber-reinforced parts
- 1.75 mm, grey
In stock
· In stock · ships from the US
- PETG matrix plastic for FibreSeeker 3 — plain FFF or with continuous fiber
- 1.75 mm, black
In stock
· In stock · ships from the USPlace your order, or talk to an engineer first
Order Loctite 3D IND475 A60 High Rebound White1 kg direct, or talk to materials engineer