Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
In every order
- SDS + technical datasheet linked on every order — no separate request needed
- No HazMat shipping — ships standard ground, no Dangerous Goods surcharge
Materials, Cleaners for Postprocessing Materials, DLP 3D Printing Materials, Engineering, Manufacturing, Resin 3D Printing Materials · LSPc, DLP, XiP
Nexa3D xCLEAN parts washing solution, 1 liter
Nexa3D xCLEAN parts-washing solvent — 3x IPA's saturation limit, no HazMat shipping, clears photopolymer resin residue in about 5 minutes.
- ✓ 3x IPA's saturation limit — fewer bath changeovers
- ✓ Not a Dangerous Good at this size — ships without HazMat freight
- ✓ Ships in 1–2 business days from Gardena, CA stock
$24
Price held 7 days after order.
NDA standard
Ships in 1–2 business days
What your process engineer actually checks
What your process engineer actually checks
3x IPA's saturation limit, before you change the bath
xCLEAN holds roughly three times the resin-saturation capacity of isopropyl alcohol before the wash bath needs replacing — fewer changeovers, less spent solvent to dispose of. It rinses clean in water and leaves none of the greasy residue typical of TPM or DPM.
No HazMat shipping, no ATEX cabinet
xCLEAN is not classified as a Dangerous Good under IATA or EU transport rules at these order sizes, so it ships without hazardous-freight surcharges and doesn't require ATEX-rated storage the way some resin solvents do. It's still a combustible liquid — keep it capped, away from heat and open flame.
A materials engineer on the line
Questions on resin compatibility, wash-cycle time, or whether your automated washer handles xCLEAN? A materials engineer answers directly — most replies in under 4 hours, NDA standard.
About this product
xCLEAN is Nexa3D’s dedicated parts-washing solvent for photopolymer resin prints — a 2-butoxyethanol-based formulation built to replace IPA, TPM, and DPM in the wash station, not another version of them.
Why process engineers switch from IPA to xCLEAN
Spec-backed differences, not marketing claims
3x IPA’s saturation limit
A liter of xCLEAN holds roughly three times the resin load isopropyl alcohol can before the bath needs changing — fewer changeovers, less spent solvent.
Rinses clean, no greasy film
Made from smaller molecules than TPM or DPM. Parts rinse clean in water instead of carrying the greasy residue those solvents leave behind.
No HazMat shipping
Not classified as a Dangerous Good under IATA or EU rules at these order sizes — it ships without hazardous-freight surcharges or special paperwork.
Recoverable by distillation
Recycle and recover xCLEAN with a vacuum-assist solvent distillation unit, extending working life well past a single wash cycle.
STEP 01
Wash
Agitate or ultrasonic-wash printed parts in xCLEAN — uncured resin typically clears in about 5 minutes.
STEP 02
Rinse
Rinse in water. No greasy TPM/DPM film to wipe down afterward.
STEP 03
Recover
Once saturation nears the practical limit, recover xCLEAN with vacuum-assist distillation instead of disposing of the full bath.
Chemical & Safety Specifications
| Property | Value |
|---|---|
| Primary component | 2-Butoxyethanol, >98% (CAS 111-76-2) |
| Physical state / color | Liquid, colorless, mild sweet/ester odor |
| Specific gravity (20°C) | 0.90 g/cm³ |
| Dynamic viscosity (20°C) | 3.3 mPa·s |
| Flash point (closed cup) | 67°C |
| Boiling point | 171°C |
| Solubility in water | 900 g/L (25°C) — rinses off in water |
| GHS classification | Combustible liquid (H227); harmful if swallowed/inhaled; skin & eye irritant; may cause drowsiness |
| Transport (DOT/IATA) | Not regulated as a Dangerous Good below 450 L (119 gal) — ships without HazMat surcharge |
Full hazard statements, handling, and PPE guidance are in the Safety Data Sheet — see Downloads below.
Compatibility
- Works across most photopolymer resin systems — not limited to Nexa3D’s own resins or printers.
- Compatible with most automated and closed-loop washing units on the market, including Nexa3D’s Wash+Cure station.
- Not approved for cleaning parts printed from biocompatible resins — follow the resin manufacturer’s wash guidance for those applications.
Typical applications
Dental & orthodontic models
High-volume DLP/SLA production
Engineering prototypes
Functional and form-fit parts
Jewelry & casting patterns
Clean burnout-ready surfaces
Automotive & consumer parts
Fixtures, housings, prototypes
Production post-processing
High-throughput wash stations
Not sure 1 liter is the right size for your throughput? Same chemistry, larger volumes:
More volume, same chemistryxCLEAN, 5 litersView product →Production volumexCLEAN, 5 gallonsView product →Pairs with xCLEANNexa3D Wash+Cure stationView station →
Tell us your wash volume and equipment — a materials engineer will recommend the right size and cycle settings.
Why Source Through Additive Plus
- Authorized Nexa3D reseller — genuine xCLEAN, shipped from Gardena, CA stock.
- A materials engineer answers compatibility and wash-cycle questions — most replies in under 4 hours.
- Stock the size that matches your throughput: 1 L, 5 L, or 5 gal, same chemistry, no reformulation risk.
| Brand | Nexa3D |
| Weight | 1000 ml |
| Country of origin | USA |
| Printing Materials | Other Materials |
| Platform | XiP |
| Technology | LSPc, DLP, XiP |
Product videos
Going through more than a liter a month?
Step up to 5 liters or 5 gallons — same xCLEAN, lower cost per liter.
Production teams save on a per-liter basis at the 5-liter and 5-gallon sizes — same formulation, no requalification. Compare sizes above, or ask a materials engineer which fits your wash-cycle volume.
Frequently bought together
Complete the workflow
Other Equipment
Nexa3D Wash+Cure
The Wash+Cure is tailored for washing and post-curing the parts printed on the XiP printer. It's is an all-in-one, automated post-processing system.
From $636
Add to cart
Accessories
Nexa3D Resin Vat for XiP – Replacement Vat Assembly
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
From $543
Add to cart
2 Business Days
Consumables
Nexa3D Everlast-2 Membrane for XiP
The genuine Nexa3D Everlast-2 membrane keeps your XiP producing clean, consistent parts — print after print.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — second-generation interface for sharp feature definition
- ✔ Ships from our Los Angeles warehouse in 5–15 business days · free U.S. shipping over $200
Order a spare today — a worn membrane shouldn't cost you a print day.
From $149
Add to cart
5–15 Business Days
Not ready for a full liter? Ask a materials engineer about a small trial pour before you commit.
Other products teams run alongside Nexa3D xCLEAN parts washing solution, 1 liter
Composite Tooling · SLS
KSPA12BK Nylon Powder – High-Performance Black SLS Printing Material for Durable Parts
Cost per kg: $75. Cost per pound: $34
The plastic nylon powder is supplied in a packaging of 10 kg/22.05 lbs.
A premium black nylon powder for superior performance.
From $750
Add to cart
In stock
Engineering
Creatbot PETG Filament - 1kg
PETG filament for FDM 3D printing — the tough, low-warp all-rounder that prints as easily as PLA but takes impact and chemical exposure like a functional part, for brackets, enclosures, and water-contact fixtures.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
From $20
Add to cart
In stock
DLP 3D Printing Materials · LSPc, DLP, XiP
Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg
xFLEX475-Black is a medium-soft, rubber-like elastomer — 150% elongation at failure, up to 50% energy return, solvent-resistant.
- ✓ Resilient with snap-back and tear resistance — pipes and manifolds, handles, seals, gaskets, midsoles
- ✓ 150% elongation at failure, up to 50% energy return, resistant to most solvents
- ✓ Genuine Nexa3D resin for the XiP · 1.5 kg cartridge · ships from US stock in 2 business days
From $415
Add to cart
In stock
· 2 Business Days
Composite Tooling · Metal LPBF
Ti64 Titanium Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs
Lightweight. High strength-to-weight. Biocompatible. Genuine AVIMETAL Ti-6Al-4V (Grade 5) titanium for LPBF metal 3D printing.
- ✓ Gas-atomized, low-oxygen — full COA on every lot
- ✓ Strong value alternative, sold in small workable volumes
- ✓ Fast dispatch from Los Angeles (ELI / Grade 23 on request)
Prints Ti-6Al-4V Grade 23 (ELI), Ti-6Al-4V Grade 5 (TC4)
From $1280
Get quote
In stock
· 10–20 business days
Engineering · FFF, LFAM
Caracol ABS Pellets – Cost-Effective Feedstock for Large-Format 3D Printing
Cost-effective ABS pellets qualified for large-format additive manufacturing (LFAM) — stiff, impact-tough parts and tooling at pellet cost, unreinforced or glass-fiber reinforced.
- ✓ Stiff and impact-tough — machines, sands, and paints cleanly for masters and tooling
- ✓ Ships dry with a lot datasheet + drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Composite Tooling
SLM 280 SS316 Build Plate | SLM 280 SS316 Build Platform 73.66 mm
The SLM 280 SS316 Build Platform is a corrosion-resistant stainless steel build plate engineered for demanding additive manufacturing environments. Manufactured from premium 316 stainless steel and precision-ground for superior flatness, this SLM 280 SS316 build plate delivers reliable first-layer adhesion, stable thermal performance, and consistent industrial-grade LPBF results.
Need a custom stainless steel build platform or alternative alloy for your LPBF system? Request a custom quote — we manufacture precision steel and specialty alloy build plates for most industrial metal 3D printers.
Prints 316L
From $1600
Get quote
In stock
· Express 2–3 wks · Standard 6–8 wks
LPBF (DMLS) 3D Printing Materials · Metal LPBF
A-Powder IN625 Nickel Powder for Metal 3D Printing | LPBF Compatible – 10 kg / 22 lbs
Corrosion-resistant. High-temperature. Weldable. Genuine AO Metal Inconel 625 nickel superalloy for LPBF metal 3D printing.
- ✓ Gas-atomized, low-oxygen — full COA per lot
- ✓ China-produced — workable volumes, no mill minimums
- ✓ Fast dispatch from Los Angeles
Prints IN625
From $1090
Get quote
In stock
· 10–20 business days
DLP 3D Printing Materials
Loctite 3D IND405 Black 1 kg
PP-like black resin: high elongation/impact for end-use jigs, housings & parts.
From $180
Add to cart
In stock
From process engineers running Nexa3D xCLEAN parts washing solution, 1 liter
Unedited feedback from customers who reorder Nexa3D xCLEAN parts washing solution, 1 liter.
★★★★★
Cure profile loaded straight into our printer and hit spec on the first build. We stopped burning plates on test prints.
MK
Marcus K.
Process Engineer · Industrial Design
★★★★★
Asked about post-cure for a functional part on a Friday. A materials engineer replied Monday with actual elongation data.
PS
Priya S.
R&D Lead · Medical Devices
★★★★★
Batch-to-batch viscosity is identical. Surface finish is repeatable run after run — no resurprises.
DR
Diego R.
Production Lead · Consumer Products
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is Nexa3D xCLEAN and how is it different from isopropyl alcohol (IPA)?
xCLEAN is Nexa3D's dedicated parts-washing solvent for photopolymer resin prints — a 2-butoxyethanol-based formulation, not IPA. It holds roughly three times the resin-saturation capacity of IPA before the bath needs changing, so a liter of xCLEAN lasts through far more wash cycles. It also rinses clean in water rather than leaving the greasy film common with IPA, TPM, or DPM at end of shift.
Which resins and 3D printers is xCLEAN compatible with?
xCLEAN is formulated to work across most photopolymer resin systems and is compatible with most automated and closed-loop washing units on the market, including Nexa3D's own Wash+Cure station. It is not approved for cleaning parts printed from biocompatible resins — follow the resin manufacturer's wash guidance for those applications.
Does xCLEAN require special shipping or storage like other resin-cleaning solvents?
No. xCLEAN is not classified as a Dangerous Good under IATA or EU transport rules at the order sizes sold here, so it ships without HazMat freight surcharges. It should still be stored in a tightly closed container away from heat, sparks, and open flame — it is a combustible liquid with a 67°C closed-cup flash point — but it does not require ATEX-rated storage or handling.
How long does a wash cycle take with xCLEAN?
Nexa3D's own testing shows xCLEAN typically clears uncured resin residue in about 5 minutes in an ultrasonic or agitated wash cycle — faster than TPM- or DPM-based alternatives. Exact time depends on part geometry, resin type, and wash equipment.
Can xCLEAN be recycled or reused?
Yes. xCLEAN can be recovered and reused with a vacuum-assist solvent distillation unit, extending the working life of a single liter well past a single wash cycle. Nexa3D recommends distillation once bath saturation nears its practical limit — about three times what IPA can handle.
What size should I order — 1 liter, 5 liters, or 5 gallons?
The 1-liter bottle of xCLEAN suits a single desktop wash station or occasional post-processing. Production teams running multiple builds a day typically move to the 5-liter or 5-gallon size to cut per-liter cost and reduce reorder frequency — all three ship the same xCLEAN chemistry.
Is xCLEAN safe to handle, and what PPE does it require?
xCLEAN carries GHS warnings for skin and eye irritation and drowsiness or dizziness from vapor exposure, and it is a combustible liquid, so gloves, eye protection, and adequate ventilation are recommended per the Safety Data Sheet. It is less hazardous to handle than TPM or DPM alternatives and does not require ATEX-rated equipment.
Do you offer a purchase order or volume pricing for xCLEAN?
Yes — for orders of 50+ liters of xCLEAN or an official purchase order, contact our materials engineering team for volume pricing and lead-time confirmation.
Place your order, or talk to an engineer first
Order Nexa3D xCLEAN parts washing solution, 1 liter direct, or talk to materials engineer