All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 433–440 of 500 Items

3DCeram · CERAMIC SLA

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Tricalcium Phosphate (TCP)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Nexa3D · LSPc, DLP, XiP

Nexa3D xMOLD Dissolvable Freeform Injection Molding Resin – LSPc for XiP | 5 kg

xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.

✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
✓ Compatible with thousands of commercial injection materials, including reinforced grades
✓ Fully dissolvable — undercuts and internal features release without side actions
✓ Genuine Nexa3D · 5 kg · in stock — ships in 5–15 business days

Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →

From $2,495

Add to cart

In stock

· 5–15 Business Days

3DCeram · CERAMIC SLA

Zirconia 3Y 3D Printing Paste

Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.

✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 8Y 3D Printing Paste

Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.

✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Shining 3D · Blue Laser / Infrared VCSEL

Shining 3D FreeScan Combo 3D Scanner – 0.02 mm Accuracy | Dual-Mode Laser + Infrared

The Shining 3D FreeScan Combo is a dual-mode handheld 3D scanner combining blue laser and infrared VCSEL in a 620 g package, achieving up to 0.02 mm accuracy for metrology, reverse engineering and inspection.

✓ Up to 0.02 mm accuracy in laser modes — tested to VDI/VDE 2634 & ISO 10360 in Shining 3D’s ISO 17025 lab
✓ Dual light source — 26-line blue laser + marker-free infrared VCSEL in one device
✓ Four scan modes — deep bores to large assemblies without switching hardware
✓ 1-year Shining 3D warranty · authorized Shining 3D reseller in the US
✓ Ship date confirmed by email after you order

From $11,999

Add to cart

Made to order

· Ship date confirmed by email after you order

Shining 3D

Shining 3D FreeScan Trio Marker-Free Laser 3D Scanner – 98-Line Handheld Metrology | 0.02 mm Accuracy

Handheld laser scanner with a 98-line marker-free mode and 0.02 mm accuracy with markers — Deep Hole Scan for holes, deep pockets, and fin walls.

✓ 98 laser lines for marker-free scanning of feature-rich parts
✓ Up to 3,010,000 points/s scan rate, point distance 0.01–3 mm
✓ Deep Hole Scan with 26 or single laser line
✓ 1-year Shining 3D warranty
✓ Ship date confirmed by email after you order

Get quote

Made to order

· Ship date confirmed by email after you order

Kings3D · SLA

Kings 1000Pro Industrial SLA 3D Printer – Marble Chassis | 39×39×24 in / 1000×1000×600 mm

Large-format industrial SLA. Marble frame. Vacuum recoating. Built for automotive panels, one-piece patterns, dental models, and architectural forms — without stitching or Z-seam artifacts.

✓ 1000 × 1000 × 600 mm build chamber — a full bumper fascia or a batch of shoe lasts in one run
✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included

Build 39x39x24 in / 1000x1000x600 mm

Get quote

Made to order

· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.

Kings3D · SLA

Kings 1200Pro Industrial SLA 3D Printer – Marble Chassis | 47×32×24 in / 1200×800×600 mm

Large-format industrial SLA. Marble frame. Vacuum recoating. Built for long single-piece parts — automotive patterns, extended trim, one-piece molds — without stitching or Z-seam artifacts.

✓ 47×32×24 in / 1200×800×600 mm build chamber — a full-length bumper pattern in one run
✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included

Build 47x32x24 in / 1200x800x600 mm

Get quote

Made to order

· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.

Equipment

Have a CAD? Have a quote in 24h.