In stock
- Lot-matched resin sealed and batch-traceable for repeatable prints
- Validated LSPc profile exposure and cure settings for your Nexa3D printer
Nexa3D xMODEL35-Black Resin – Rigid High-Temp Photopolymer for XiP | 1.5 kg
What your process engineer actually checks
Numbers you can design to
Every value on this card comes from the official Nexa3D xMODEL35 technical data sheet with the ASTM method named next to it — 87 °C HDT at 1.82 MPa, 2300 MPa flexural modulus, 83 D Shore hardness. No rounded-up figures, and legacy numbers from older sheets are not reused.
A materials engineer on the line
Questions on cure settings, finishing or switching from another resin? Our engineers run Nexa3D LSPc resins in-house. Sub-4h reply, NDA standard.
Nexa3D xMODEL35-Black is a rigid, high-performance LSPc photopolymer that combines strength, stiffness and temperature resistance in a single 1.5 kg cartridge for XiP and XiP Pro. With 87 °C HDT at 1.82 MPa and a 2300 MPa flexural modulus, it is the grade to reach for when a printed model, jig or light end-use part has to hold its shape under load and warmth.
Why engineers choose xMODEL35
Published ASTM data from the Nexa3D technical data sheet — not marketing estimates.
87 °C HDT at 1.82 MPa
Parts stay dimensionally honest in warm fixtures, under lamps and through heated finishing steps that soften general-purpose model resins.
2300 MPa flexural modulus
Stiff enough for snap-fit housings and locating jigs, with 108 MPa flexural stress and 53 MPa ultimate tensile strength.
21 / 112 J/m IZOD impact
Notched and unnotched values per ASTM D256, with 9% elongation at break — rigid, but not glassy in normal handling.
630 cP at 30 °C
Low viscosity recoats and drains quickly in LSPc printing, and UL94 HB at 1.5 mm is documented for enclosure work.
How we supply xMODEL35
From Nexa3D formulation to a cured part on your bench.
Formulated & tested
Nexa3D formulates xMODEL35 for 405 nm LSPc and publishes ASTM D638, D790, D256 and D648 data, so you design to measured numbers.
Stocked & lot-matched
We hold xMODEL35-Black 1.5 kg cartridges in US stock, sealed and batch-traceable, and dispatch in 2 business days.
Print, wash & cure
Load the cartridge in XiP or XiP Pro, wash in xClean then IPA, dry, and post-cure to reach the published properties.
Physical and mechanical properties
| Property | Method | Value |
|---|---|---|
| Young’s modulus | ASTM D638 | 1765 MPa |
| Ultimate tensile strength | ASTM D638 | 53 MPa |
| Elongation at break | ASTM D638 | 9% |
| Viscosity, 25 °C | ASTM D7867 | 950 cP |
| Viscosity, 30 °C | ASTM D7867 | 630 cP |
| Flexural modulus | ASTM D790 | 2300 MPa |
| Flexural stress | ASTM D790 | 108 MPa |
| IZOD impact (notched / unnotched) | ASTM D256 | 21 / 112 J/m |
| HDT @ 0.45 MPa | ASTM D648 | 64 °C |
| HDT @ 1.82 MPa | ASTM D648 | 87 °C |
| Glass transition (DMA tan δ) | ASTM D4065 | 112 °C |
| Shore hardness | ASTM D2240 | 83 D |
| Water absorption (24 h) | ASTM D570 | 0.42% |
| Flammability | UL94 | HB (1.5 mm) |
| Liquid density | ASTM D4052 | 1.11 g/cm³ |
Printed properties depend on part geometry, orientation and post-cure. Values are typical, not a specification.
Typical applications
Where the stiffness and heat numbers actually earn their keep.
Compatible printers & post-processing
This 1.5 kg cartridge of xMODEL35-Black is made for the Nexa3D XiP and XiP Pro desktop LSPc printers. The same resin is also sold as a 5 kg bottle, which additionally feeds the NXE 400 and NXE 400 Pro. After printing, wash parts in xClean for no more than 2 minutes, follow with an IPA rinse of no more than 5 minutes, then dry fully before curing. Post-cure for 2 × 30 minutes in the XiP Cure unit, or a single 60-minute cycle in xCURE. The values in the table are measured on fully cured specimens, so a shortened cure will leave parts softer and lower in HDT than the data sheet suggests.
Not sure xMODEL35 is the right resin?
Three neighbours in the Nexa3D LSPc line, depending on budget, application and package size.
Why source xMODEL35 through Additive Plus
- Genuine Nexa3D xMODEL35-Black — lot-matched, US stock, ships in 2 business days
- Validated LSPc exposure and cure profiles for XiP and XiP Pro
- Materials engineers who run these resins in-house — sub-4h reply, NDA standard
- Volume pricing and official purchase orders supported for production accounts
Downloads
| Brand | Nexa3D |
| Available colors | Black |
| Weight | 1.5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Technology | LSPc |
| Package | 1.5 kg cartridge |
| Material form | Liquid photopolymer resin |
| Printer | XiP, XiP Pro |
| Tensile Strength | 53 MPa |
| Tensile Modulus (MPa) | 1765 MPa |
| Elongation at Break (%) | 9% |
| Shore Hardness (3s) | 83 D |
| [email protected] MPA (°C) | 64 °C |
| Water Absorption (24hr) % | 0.42% |
| Flexural Modulus (MPa) | 2300 MPa |
| Flexural Strength (MPA) | 108 MPa |
| IZOD Impact (Notched, J/m) | 21 J/m |
| Resin Type | General, High-temp, Rigid |
| Application | Engineering, Manufacturing |
Product videos
We stock the full Nexa3D LSPc resin line and support official purchase orders and volume pricing. Tell us your printer and monthly volume and we'll match the right resin and quantity.
Other products teams run alongside Nexa3D xMODEL35-Black Resin – Rigid High-Temp Photopolymer for XiP | 1.5 kg
Rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
- ✓ Ultra-thin layers & crisp XY resolution — fine-detail precision parts
- ✓ 37 MPa tensile · 1900 MPa modulus · 8% elongation — rigid yet not brittle
- ✓ Very low water uptake (0.3%) & strong chemical resistance
- ✓ Fast printing thanks to high reactivity
Made to order
· Ships in <10 business days
High-heat PC pellets qualified for large-format additive manufacturing (LFAM) — high heat deflection, high impact, and dimensional stability for big tooling at pellet cost.
- ✓ High heat deflection and high impact — holds shape where ABS and PET-G soften
- ✓ Ships sealed with a lot datasheet + high-temperature drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
xABS3843-Black is a tough, high-modulus resin with the look and feel of injection-molded black ABS.
- ✓ Excellent flexural and tensile strength with a relatively high elongation — durable functional parts
- ✓ Injection-molded black ABS aesthetics for enclosures, housings, and snap-fit assemblies
- ✓ Genuine Nexa3D resin for the XiP · 1.5 kg cartridge · not in stock, available on request
Out of stock
· Not in stock — available on request
Nexa3D xMODEL15-Black is an economical 405 nm LSPc photopolymer for fast, high-detail concept and appearance models — 55 MPa tensile, 78–80 Shore D, with a smooth, finish-ready surface.
- ✓ High detail and a paintable, plate-ready finish
- ✓ Runs on Nexa3D XiP, XiP Pro and NXE 400 / NXE 400 Pro — 405 nm LSPc
- ✓ In US stock — ships in 2 business days, lot-matched for repeatable prints
In stock
· 2 Business Days
Need a titanium build platform for a different printer model or custom dimensions? Request a custom quote — we manufacture precision titanium build plates and additive manufacturing platforms for most metal AM systems.
In stock
· Express 2–3 wks · Standard 6–8 wks
Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.
- ✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Print aluminium nitride (AlN) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a ceramic that conducts heat yet insulates electrically.
- ✓ 163 W/m·K thermal conductivity with electrical insulation — power-electronics substrates
- ✓ Print conformal cooling and channelled geometries not possible by pressing
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
- ✓ High toughness & thermal-fatigue resistance for die-casting tooling
- ✓ Gas-atomized — COA on request
- ✓ Sold in small, workable volumes
Available to order
· Lead time on requestCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which Nexa3D printers run xMODEL35-Black 1.5 kg?
What colors and package sizes does xMODEL35 come in?
How do I wash and post-cure xMODEL35 parts?
What is xMODEL35 best used for?
How should xMODEL35 cartridges be stored?
Is xMODEL35-Black biocompatible or certified for medical use?
Can I test xMODEL35 before committing to volume?
Place your order, or talk to an engineer first
Order Nexa3D xMODEL35-Black Resin – Rigid High-Temp Photopolymer for XiP | 1.5 kg direct, or talk to materials engineer