In stock
- Lot-matched resin sealed and batch-traceable for repeatable prints
- Validated LSPc profile exposure and cure settings for your Nexa3D printer
Nexa3D xMODEL15-Gray Resin – Fast High-Detail Model Photopolymer for XiP and NXE | 5 kg
Nexa3D xMODEL15-Gray is an economical 405 nm LSPc photopolymer for fast, high-detail concept and appearance models — 55 MPa tensile, 78–80 Shore D, with a neutral gray finish that reads surface detail in design reviews.
- ✓ High detail and a paintable, plate-ready finish
- ✓ Runs on Nexa3D XiP, XiP Pro and NXE 400 / NXE 400 Pro — 405 nm LSPc
- ✓ In US stock — ships in 2 business days, lot-matched for repeatable prints
$268
What your process engineer actually checks
Exposure, cure and detail you can trust
xMODEL15 resolves fine features at 405 nm with a smooth as-printed finish. The validated exposure and post-cure profile is published for XiP, XiP Pro and NXE 400 — you print to a known recipe, not a guess, and reorders match lot-to-lot.
A materials engineer on the line
Questions on cure settings, finishing or switching from another model resin? Our engineers run Nexa3D LSPc resins in-house. Sub-4h reply, NDA standard.
Nexa3D xMODEL15-Gray is an economical LSPc photopolymer for fast, high-detail concept and appearance models. Gray reads surface detail and shadow better than darker resins under review lighting, prints in minutes on Nexa3D LSPc systems, and sands, primes and paints cleanly.
Why engineers choose xMODEL15
A model resin picked for detail, speed and a finish you can present.
High-detail resolution
Crisp text, thin walls and sharp edges straight off the plate — LSPc pixel-level accuracy for appearance and fit models.
Fast LSPc throughput
Low 200–300 mPa·s viscosity and 405 nm cure keep whole-plate builds to minutes, so design iterations land the same day.
Gray reads detail
Neutral gray shows surface transitions and draft angles clearly in photos and design reviews — the default choice for form studies.
Batch-consistent
Formulated to ASTM-referenced properties and stocked lot-matched, so a reorder prints to the same profile without re-tuning.
How we supply xMODEL15
Formulated, batch-tested and lot-matched before it reaches your vat.
Formulated & tested
Each batch is produced to the published xMODEL15 property set and validated against ASTM tensile, hardness and HDT methods.
Stocked & lot-matched
Held in US inventory and shipped lot-matched, so repeat orders drop into the same validated LSPc print profile.
Print, wash & cure
Print on any 405 nm Nexa3D LSPc system, wash in xClean then IPA, and UV post-cure to reach full mechanical properties.
Physical and mechanical properties
| Property | Method | Value |
|---|---|---|
| Viscosity, 30 °C | GB/T 22235 | 200–300 mPa·s |
| Modulus of elasticity | ASTM D638 | 1800 MPa |
| Tensile strength | ASTM D638 | 55 MPa |
| Elongation at break | ASTM D638 | 10% |
| Shore hardness (0s, 3s) | ASTM D2240 | 78–80 D |
| HDT @ 0.45 MPa | ASTM D648 | 58.3 °C |
| HDT @ 1.82 MPa | ASTM D648 | 53.3 °C |
| Water absorption (24 h) | ASTM D570 | 0.7% |
| Density | GB/T 4472 | 1.09–1.10 g/cc |
Printed properties depend on part geometry, orientation and post-cure. Values are typical, not a specification.
Typical applications
Where a fast, high-detail model resin earns its place.
Compatible printers & post-processing
xMODEL15 is a 405 nm LSPc photopolymer. The 5 kg bottle feeds Nexa3D NXE 400 / NXE 400 Pro and XiP Pro systems; the same resin ships as a 1.5 kg cartridge for the XiP and XiP Pro desktops. Wash printed parts in xClean followed by IPA, then UV post-cure to reach the full mechanical property set. See the Technical Data Sheet below for the validated cure recipe.
Not sure xMODEL15 is the right model resin?
Compare it with the other Nexa3D model resins in the same LSPc family.
Why source xMODEL15 through Additive Plus
- Genuine Nexa3D xMODEL15 resin — lot-matched and stocked in the US, shipped in 2 business days.
- Validated LSPc print and cure profiles for XiP, XiP Pro and NXE 400 — no guesswork on exposure.
- Materials engineers who run these resins in-house — sub-4h reply, NDA standard.
- Volume pricing and official purchase orders supported for production accounts.
Downloads
| Brand | Nexa3D |
| Available colors | Gray |
| Weight | 5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Technology | LSPc |
| Package | 5 kg bottle |
| Material form | Liquid photopolymer resin |
| Printer | NXE 400, NXE 400 Pro, XiP, XiP Pro |
| Tensile Strength | 55 MPa |
| Tensile Modulus (MPa) | 1800 MPa |
| Elongation at Break (%) | 10% |
| Shore Hardness (3s) | 78–80 D |
| [email protected] MPA (°C) | 58.3 °C |
| Water Absorption (24hr) % | 0.7% |
| Resin Type | General |
| Application | Engineering, Manufacturing |
Product videos
We stock the full Nexa3D LSPc resin line and support official purchase orders and volume pricing. Tell us your printer and monthly volume and we'll match the right resin and quantity.
Other products teams run alongside Nexa3D xMODEL15-Gray Resin – Fast High-Detail Model Photopolymer for XiP and NXE | 5 kg
Crystal-clear resin for precision parts. Low viscosity = effortless flow & void-free prints.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
xMODEL17-Clear is a high-clarity prototyping resin from Nexa3D — fine feature detail and transparency at very high print speed.
- ✓ High optical clarity for see-through models, fluidics, and light-transmitting prototypes
- ✓ Fine feature resolution with fast throughput on Nexa3D systems
- ✓ Genuine Nexa3D resin for NXE-series printers · 5 kg · ships from US stock in 2 business days
In stock
· 2 Business Days
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
In stock
· Express 2–3 wks · Standard 6–8 wks
Maraging tool steel. Easy to harden. AM-proven. Genuine Carpenter PowderRange® M300 (1.2709) for LPBF, EBM & DED metal 3D printing.
- ✓ Exceptional strength & hardness after simple aging
- ✓ Low-distortion AM processability (vs. H13/M2)
- ✓ Full COA on every lot · small volumes · in US stock, ready to ship
In stock
· In US stock · ready to ship
- ✓ Weather- and UV-stable — holds color, gloss, and strength outdoors
- ✓ Ships dry with a lot datasheet + drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Implant-grade. Biocompatible. Wear-resistant. Genuine Carpenter PowderRange® CCM cobalt-chrome (CoCrMo, ASTM F75) for LPBF, EBM & DED metal 3D printing.
- ✓ VIM-melted, nitrogen gas-atomized — COA on request
- ✓ Excellent biocompatibility & non-magnetic (MRI-safe)
- ✓ Sold in small, workable volumes · in US stock, ready to ship
In stock
· In US stock · ready to ship
xMOLD is Nexa3D’s dissolvable resin for Freeform Injection Molding — print the mould on an LSPc printer, inject a real production thermoplastic, then dissolve the mould away in solvent. Injection-moulded parts without cutting steel tooling.
- ✓ Tooling in hours, not weeks — revise the mould in CAD and reprint the same day
- ✓ Compatible with thousands of commercial injection materials, including reinforced grades
- ✓ Fully dissolvable — undercuts and internal features release without side actions
- ✓ Genuine Nexa3D · 5 kg · in stock — ships within 5–7 business days
Open-platform alternative: Cubic Ink Mold 400 VP — water-breakable Freeform Injection Molding resin, in stock. Print parameters for XiP available. View Mold 400 VP →
In stock
· Ships in 1–2 business days from US stock.
Cyanate-ester-like LSPc resin for stiff, heat-resistant functional parts and injection-molding inserts — 5 kg bottle.
- ✓ 135 MPa flexural strength, 3250 MPa flexural modulus
- ✓ 128 °C glass transition (DMA, E″)
- ✓ Runs on NXE 400/400Pro, XiP and XiP Pro
In stock
· Ships in 1–2 business days from US stock.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which Nexa3D printers is xMODEL15 compatible with?
What colors and sizes does xMODEL15 come in?
How do I post-process xMODEL15 parts?
What is xMODEL15 best used for?
How should I store xMODEL15 resin?
Is xMODEL15 biocompatible or certified for medical or dental use?
Can I get a sample before ordering in volume?
Place your order, or talk to an engineer first
Order Nexa3D xMODEL15-Gray Resin – Fast High-Detail Model Photopolymer for XiP and NXE | 5 kg direct, or talk to materials engineer