In stock
Nexa3D 9.3″ 4K Monochrome LCD Module for XiP – Replacement Masking Screen
Replacement 9.3-inch 4K monochrome LCD for the Nexa3D XiP — the masking screen that projects each layer through the light engine. A worn or failing LCD shows up as dim areas, stuck pixels or incomplete cures; this drop-in module restores full-resolution printing.
- ✓ 9.3″ 4K monochrome masking LCD
- ✓ Direct replacement for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
$499
Looking for Nexa3D resins? They are discontinued. See current replacements →
The masking LCD is the heart of the XiP’s LSPc engine — it defines every layer the light engine cures. Over time pixels wear, and prints start showing dim zones or incomplete cures. This genuine 9.3-inch 4K monochrome module is a direct replacement that brings the printer back to full resolution.
Compatibility & Specifications
- Type: 9.3″ 4K monochrome masking LCD module
- Function: projects each layer mask for the LSPc light engine
- Compatible printer: Nexa3D XiP desktop resin printer (not XiP Pro)
- Part: genuine Nexa3D XiP LCD module (XIP_LCD1)
- Replace when: stuck/dim pixels, uneven cure or repeated screen-related layer failures
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. We sell and support the XiP, so the module you receive matches your printer exactly — with sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D 9.3″ 4K Monochrome LCD Module for XiP – Replacement Masking Screen
Eight-colour glaze kit for finishing parts printed in Zetamix Porcelain filament.
- ✔ Eight colours in one kit
- ✔ Made for parts printed and fired in Zetamix Porcelain
- ✔ Genuine Zetamix by Nanoe
In stock
· Ships from California · 10–20 business days
Genuine Nexa3D XiP Alignment Kit for build-plate leveling on the Nexa3D XiP desktop resin 3D printer — part 12347-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D alignment kit — part 12347-01 (Rev A)
- ✓ Levels and aligns the XiP build platform for flat first layers
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Antistatic starter kit for Delfin vacuums with a 2-inch (50 mm) inlet: hose, wand, floor brush, nozzle and connectors in one box, so the vacuum is ready to clean on day one.
- ✓ Fits the Mistral 300 BL D2 and the Mistral 451 BL Inert
- ✓ 10 ft hose · double bend wand · 16.9 in floor brush · cone nozzle · connectors
- ✓ Genuine Delfin kit · ship date confirmed by email after you order
In stock
· Ship date confirmed by email
Replacement masking LCD module for the Nexa3D XiP Pro industrial resin printer — the display that defines every cured layer under the light engine. A worn LCD shows as dim zones, stuck pixels or incomplete cures; this drop-in module restores full-resolution output.
- ✓ Masking LCD module for the XiP Pro light engine
- ✓ Direct replacement for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printer is this LCD module for?
Is this a genuine Nexa3D part?
When should the LCD be replaced?
Place your order, or talk to an engineer first
Order Nexa3D 9.3″ 4K Monochrome LCD Module for XiP – Replacement Masking Screen direct, or talk to materials engineer