Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
With every system
- Starter detergent + operator guidance matched to your materials
- US support and spares CE / cTÜVus, 1-year warranty
Other Equipment, ORYX WashStation, Post-Processing Equipment, Wash&Cure · Support removal
Oryx SCA1200HT Desktop Support Removal Station — Heated Soluble-Support Bath | 46 L
Desktop automated station that removes dissolvable support material from FDM and PolyJet 3D-printed parts in a heated, agitated water-detergent bath — no IPA, no hand-picking.
- ✓ Automated heated soluble-support removal (50–85 °C) for FDM & PolyJet
- ✓ 46 L tank · 10×10×12 in basket · quiet desktop footprint
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
Price held 7 days after order.
US-built · CE / cTÜVus
1-year warranty + US support
What your production engineer actually checks
What your production engineer actually checks
Hands-off, heated, repeatable
The SCA1200HT dissolves soluble support in a heated, agitated water-detergent bath with selectable presets (50, 60, 70, 85 °C, plus heat-off). A spray-nozzle pump drives even flow on a timer, so support removal runs unattended and repeatably — not by hand and not by guesswork. Over-temp and water-level alarms make it safe to leave running.
An applications engineer on the line
Not a ticket queue. We post-process AM parts in-house, so detergent, temperature and cycle advice comes from the floor. Sub-4h reply, NDA standard.
46.2 L
Tank capacity (12.2 gal)
10×10×12 in
Removable basket (25×25×30 cm)
50–85 °C
Heated presets (+ heat-off)
FDM + PolyJet
Soluble-support removal
CE / cTÜVus
Certified · 1-yr warranty
About this product
The Oryx SCA1200HT is a desktop station that automatically removes dissolvable support material from FDM and PolyJet 3D-printed parts. Parts soak in a heated, agitated water-detergent bath that dissolves the support away on a timed cycle — no IPA, no hand-picking, no damaged features.
Why FDM shops run the SCA1200HT
Automated soluble-support removal on the bench — heated, quiet, hands-off.
Heated, automated dissolution
A heated tank with selectable presets (50, 60, 70, 85 °C, plus heat-off) and a spray-nozzle pump dissolves soluble support on a timer — unattended, and far faster than picking supports by hand.
Water-based, no IPA
Runs water-soluble/caustic support detergents (such as Stratasys WaterWorks/EcoWorks) — no IPA and no flammable solvents, so there is no explosion-proof requirement and a simpler EHS review.
FDM & PolyJet materials
Removes soluble support around ABS, ASA, PC, nylon and PEEK parts, and dissolves printed molds and supports in workflows like Freeform Injection Molding. One station for the whole soluble-support workflow.
Safe to leave running
Over-temperature and water-level alarms halt the cycle if something is out of range. It is quiet, desktop-sized, US-built, and carries CE, cTÜVus, RoHS, WEEE and RCM approvals.
How the SCA1200HT runs a load
Load the basket, pick the temperature, walk away.
Step 01
Load and set
Place parts in the stainless basket (10×10×12 in), choose the temperature preset for the material and set the timer.
Step 02
Heated dissolution
The heated detergent solution circulates through a spray nozzle, dissolving soluble support evenly around the parts while you do other work.
Step 03
Rinse and unload
Lift out the basket, rinse, and unload clean parts with the support gone — no picking, no marks on fine features.
Where the SCA1200HT fits
FDM and PolyJet shops that want support removal off the bench-vice.
FDM / FFF parts
ABS, ASA, PC, nylon soluble support
PolyJet parts
Soluble support dissolution
PEEK & high-temp
Heated presets to 85 °C
FIM demolding
Dissolve printed molds & supports
Service bureaus
Unattended, repeatable batches
Jigs & fixtures
Clean tooling, hands-off
Key specifications
- Process: automated heated soluble-support removal — water-detergent bath, spray-pump agitation
- Tank capacity: 12.2 gallons / 46.2 L · basket: 10 × 10 × 12 in (25 × 25 × 30 cm)
- Heating: presets 50, 60, 70, 85 °C + heat-off · materials: FDM (ABS, ASA, PC, nylon, PEEK) + PolyJet
- External: 26.0 × 17.5 × 20.5 in (66.0 × 44.5 × 52.0 cm)
- Power: 100–120 V~ 12 A or 220–240 V~ 9 A, 50–60 Hz · manual fill/drain
- Approvals: CE / cTÜVus / RoHS / WEEE / RCM · 1-year warranty · US-built
See the Specifications tab for the full datasheet.
Not sure the SCA1200HT is the right station?
Same Oryx line — pick by volume and method.
Tell us your printer, materials and part volume — an applications engineer will confirm whether the SCA1200HT fits or whether the industrial SCA3600 is the better call, and which support detergent to run. We post-process AM parts ourselves. Sub-4h reply, NDA standard.
Why source the SCA1200HT through Additive Plus
- Authorized Oryx partner — US sales, support and spares through one contact
- Starter support-removal detergent and operator guidance with every unit
- Application support from a team that post-processes AM parts in-house
- <24h response · 200+ AM systems delivered across 23 countries
| Brand | Oryx |
| Technology | Support removal |
| Country of origin | USA |
| Maximum Capacity | 12.2 gallons (46.2 liters) |
| Processing | Heated water-detergent bath, spray-pump agitation |
| External Dimensions | 26.0×17.5×20.5 in (66.0×44.5×52 cm) |
| Removable Parts Basket | 10×10×12 in (25.0×25.0×30.0 cm) |
| Heated Presets | 50, 60, 70, 85 °C + heat-off |
| Power Requirements | 100-120V~ 50-60Hz 12A or 220-240V~ 50-60Hz 9A |
| Regulatory Approvals | CE / cTUVus / RoHS / WEEE / RCM |
| Warranty | 1 Year |
See your supports dissolve clean
Send us a batch of your FDM or PolyJet parts and we will remove the soluble support on the SCA1200HT in California — you inspect the result before you commit to a system.
Other products teams run alongside Oryx SCA1200HT Desktop Support Removal Station — Heated Soluble-Support Bath | 46 L
Media blasting · Surface finishing
AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.
- ✓ Automated deburr, smooth and clean for metal and plastic parts
- ✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
- ✓ Lead time: 5–8 weeks — built to order · install + training included
- ✓ Starter consumable included — 25 L of finishing media, ready to run out of the box
From $32460
Add to cart
On backorder
· Lead time: 5–8 weeks — built to order. Install and operator training included.
Depowdering stations · Cleaning, Surface finishing
AM Solutions S2 — Continuous Automated Depowdering & Finishing System
Fully automated continuous blasting line that cleans and surface-finishes whole powder-bed print jobs in 24/7 operation — load a full build, walk away.
- ✓ Continuous 24/7 depowdering + surface finishing, hands-free
- ✓ 5-nozzle PU loop belt + rotary screen drum · SLS / MJF / HSS, any brand
- ✓ Lead time: 8–14 weeks — built & configured to order
From $176815
Add to cart
On backorder
· Lead time: 8–14 weeks — built & configured to order. Install, line integration and training included.
ORYX WashStation · Support removal
Oryx SCA3600 Industrial Support Removal Station — Heated Soluble-Support Bath | 102 L
Industrial, high-throughput station that removes dissolvable support material from large or many FDM and PolyJet 3D-printed parts in a heated, agitated water-detergent bath — no IPA, no hand-picking.
- ✓ 102 L heated tank · 16×16×14 in basket · No-Heat mode for PolyJet
- ✓ Automated soluble-support removal for FDM & PolyJet, on a rolling cart
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
In stock
· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, install guidance included.
Plastic Injection Molding Machine
Polypropylene (PP) CM500LN Natural Pellets - 2 lbs
Very High Flow Impact Copolymer for Thin-Wall Molding
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $75
Add to cart
In stock
Post-Processing Equipment · Cleaning, Surface finishing
AM Solutions S1 Wet — Automated Wet-Blasting Cleaning & Finishing System
Automated wet-blasting cell that cleans and surface-finishes metal and polymer 3D-printed parts with a water-media slurry — dust-free, spark-free, no ATEX compliance needed.
- ✓ Wet blasting for metal LPBF parts + polymers — no dust, no ATEX
- ✓ PLC recipes, closed-loop water + media recycling
- ✓ Lead time: 8–12 weeks — built & configured to order
From $167280
Add to cart
On backorder
· Lead time: 8–12 weeks — built & configured to order. Install and operator training included.
Accessories APSX
Dryer Oven
General purpose oven for heating the plastic pellets up to 437° F.
From $900
Add to cart
In stock
Other Accessories and Spare Parts · FFF
UltiMaker PVA Removal Station
Efficient 3D Printing Support Removal Tool.
From $1095
Add to cart
On backorder
From teams running Oryx support removal
Unedited feedback from production and R&D leads.
★★★★★
Hand-picking supports off nylon parts was killing us. The SCA1200HT dissolves them overnight and the parts come out clean and undamaged.
GW
Grant Whitaker Production Engineer · Industrial manufacturing
★★★★★
Sits on a bench, plugs into a normal outlet, and the temperature presets mean we just pick the material and walk away.
PL
Petra Lang Lab Manager · Service bureau
★★★★★
No IPA, no fumes — the water-based solution passed our EHS review with no special handling. Consistent results every batch.
HR
Hassan Reyes AM Engineer · Aerospace
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What does the SCA1200HT actually do?
The Oryx SCA1200HT automatically removes dissolvable (soluble) support material from 3D-printed parts. Parts sit in a stainless basket inside a heated tank, where an agitated water-plus-detergent solution dissolves the support away on a timed cycle. It replaces slow, inconsistent hand-picking of supports with an unattended, repeatable process.
Which printers and materials is it for — is this a resin/IPA wash station?
No — the SCA1200HT is not a resin or IPA wash station. It is built for FDM/FFF and PolyJet parts, dissolving soluble support around ABS, ASA, PC, nylon and PEEK parts using a water-based caustic detergent (such as Stratasys WaterWorks/EcoWorks). It is also used to dissolve away printed molds and supports in workflows like Freeform Injection Molding.
What support solution does it use?
The SCA1200HT runs water-soluble/caustic support-removal detergents — no IPA, TPM or flammable solvents. The stainless tank is built for caustic solutions, so there is no explosion-proof/ATEX requirement. Additive Plus supplies the detergent and advises the right concentration for your material.
What part sizes does it handle?
The removable stainless basket measures 10 × 10 × 12 in (25 × 25 × 30 cm), inside a 12.2-gallon (46.2 L) heated tank. That suits single parts and small batches from a desktop FDM or PolyJet printer. For larger or higher-volume parts, Additive Plus offers the industrial SCA3600 with a 16 × 16 × 14 in basket.
Does it heat the solution, and how hot?
Yes. The SCA1200HT heats the detergent solution with user-selectable presets of 50, 60, 70 and 85 °C, plus a heat-off mode for materials that should be processed at room temperature. Heat speeds up dissolution; the presets let you match temperature to the material without overheating delicate parts.
Is it safe to run unattended?
Yes. The SCA1200HT is designed for unattended, automated operation with over-temperature and water-level alarms that halt the cycle if something is out of range. It runs quietly on a desktop, uses a non-flammable water-based solution, and carries CE, cTÜVus, RoHS, WEEE and RCM approvals.
What power does it need?
The SCA1200HT runs on 100–120 V~ (12 A) or 220–240 V~ (9 A), 50–60 Hz — a standard outlet. External dimensions are 26.0 × 17.5 × 20.5 in (66.0 × 44.5 × 52.0 cm). You fill and drain the tank manually; no plumbing or compressed air is required.
What is the lead time and warranty?
The SCA1200HT is US-built and ships from Additive Plus with a 1-year warranty; lead time is confirmed at quote. Every unit includes operator guidance and starter detergent, with support and spares through a single US point of contact. Request a quote for pricing and availability.
Place your order, or talk to an engineer first
Order Oryx SCA1200HT Desktop Support Removal Station — Heated Soluble-Support Bath | 46 L direct, or talk to materials engineer