Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
On backorder
With every system
- Install + operator training plus starter media and compound
- Validated finishing cycles set and tested at handover
Other Equipment, Media blasting, Post-Processing Equipment, Surface finishing · Surface finishing
AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.
- ✓ Automated deburr, smooth and clean for metal and plastic parts
- ✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
- ✓ Lead time: 5–8 weeks — built to order · install + training included
- ✓ Starter consumable included — 25 L of finishing media, ready to run out of the box
$32,460
Price held 7 days after order.
Install + training included
Tailored service plan
What your production engineer actually checks
What your production engineer actually checks
Automated finishing, entry-level cost
A high-frequency processing bowl (3,600 RPM, 0.65 kW drive) automates deburring, smoothing and cleaning that used to be done by hand — the lowest-cost way to bring repeatable AM finishing in-house. A 50 L sedimentation basin handles process water and it runs quiet at ≤78 dB(A).
An applications engineer on the line
Not a ticket queue. We finish AM parts in-house (AO Metal), so media, compound and cycle advice comes from the floor. Sub-4h reply, NDA standard.
220 × 590 mm
Processing bowl (8.6 × 23.2 in)
3,600 RPM
High-frequency processing
0.65 kW
Drive power
≤78 dB(A)
Noise level
50 L
Sedimentation basin
About this product
The AM Solutions M1 Basic is an entry-level automated vibratory finishing system that deburrs, smooths and cleans metal and plastic 3D-printed parts in a high-frequency processing bowl — the lowest-cost way to bring repeatable AM finishing in-house.
Why teams start with the M1 Basic
Automated finishing at the lowest entry cost in the AM Solutions range.
Automated finishing, entry-level cost
A high-frequency processing bowl automates deburring, smoothing and cleaning that used to be done by hand — the lowest-cost way to bring repeatable AM finishing in-house.
High-frequency action
Processing runs at 3,600 RPM on a 0.65 kW drive, working small parts and fine features evenly for a consistent deburr and smooth across the batch.
Integrated water handling
A 50 L sedimentation basin manages the process water on board, and the machine runs quiet at ≤78 dB(A) — suitable for a lab or a spot on the production floor.
Compact and mobile
A small footprint that moves by stacker, pallet truck or on rollers, with 24 V DC controls. Plug it in and start finishing — no complex installation.
How the M1 Basic finishes a batch
Load, run the cycle, unload clean parts.
Step 01
Load parts, media, compound
Place the AM parts with finishing media and compound into the 220 × 590 mm processing bowl and set the cycle for the material and finish.
Step 02
High-frequency cycle
The bowl vibrates at 3,600 RPM, tumbling parts against the media to deburr, smooth and clean the surface evenly.
Step 03
Separate & unload
The sedimentation basin settles the process water; separate parts from media and unload clean, evenly finished components.
Where the M1 Basic fits
Labs and shops finishing single parts and short runs.
Metal AM parts
Deburr + smooth small parts
Plastic AM parts
Smoother, cleaner surface
Functional prototypes
Consistent edge break
Single parts & short runs
Right-sized entry system
Deburr before assembly
Clean edges for fit-up
Lab & R&D finishing
Quiet, in-lab operation
Key specifications
- Process: vibratory mass finishing — high-frequency processing bowl
- Processing bowl: 220 × 590 mm / 8.6 × 23.2 in
- Processing speed: 3,600 RPM · drive power: 0.65 kW
- Sedimentation basin: 50 L · noise: ≤78 dB(A)
- Transport: stacker, pallet truck, movable by rollers
- Control voltage: 24 V DC · origin: Germany (Rösler)
See the Specifications tab for the full datasheet.
Not sure the M1 Basic is the right finisher?
Same AM Solutions line — pick by capacity and process.
Tell us your part size, material and target finish — an applications engineer will confirm whether the M1 Basic is the right entry system or whether the M4 fits better, and which media and compound to run. We finish AM parts ourselves. Sub-4h reply, NDA standard.
Why source the M1 Basic through Additive Plus
- Install and operator training included, with starter media and compound
- Media, compound, spares and service through one US point of contact
- Application support from a team that finishes AM parts in-house
- <24h response · 200+ AM systems delivered across 23 countries
| Brand | AM Solutions, Rösler |
| Technology | Surface finishing |
| Country of origin | Germany |
| Inside dimensions processing bowl | 220 x 590 mm / 8.6 x 23.2 in |
| High frequency processing | 3,600 RPM |
| Drive power | 0.65 kW |
| Sedimentation basin | 50 l |
| Noise level | ≤ 78 dB(A) |
| Control voltage | 24 V DC |
| Transport | Stacker, pallet truck, movable by rollers |
See the finish on your parts first
Send us a batch of your metal or plastic AM parts and we will deburr, smooth and clean a sample set in California — you inspect the finish before you commit to a system.
Other products teams run alongside AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
ORYX WashStation · Support removal
Oryx SCAWaterjet Support Removal Spray Booth — Pressurized Waterjet | 5 gal
Enclosed pressurized-waterjet spray booth for fast, targeted support-material removal on 3D-printed parts — manual dual-pressure wands, no heat and no detergent, cleaning in minutes.
- ✓ Dual-pressure waterjet wands up to 1700 psi — bulk and fine detail
- ✓ No heat, no detergent, no plumbing required — mobile or direct-plumb
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
In stock
· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, setup guidance included.
Plastic Injection Molding Machine
APSX-PIM Plastic Material Starter Kit
Curated Plastic Set for Fast-Track Learning on Desktop Injection Molding Machines
From $250
Add to cart
In stock
Depowdering stations · Cleaning, Surface finishing
AM Solutions S1 — Automated Depowdering & Surface Finishing System
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 6–9 weeks — built to order · install + training included
From $69920
Add to cart
On backorder
· Lead time: 6–9 weeks — built to order. Install and operator training included.
Accessories APSX
Pace 8889-0150P1 Arm-Evac Fume Extraction
Low profile, compact unit fits under workbench.
From $1250
Add to cart
In stock
Accessories APSX
UNMACHINED OVERSIZED BLOCK FOR APSX-PIM
6061 Aluminum material with mounting holes
From $60
Add to cart
In stock
Plastic Injection Molding Machine
APSX-PIM MUD Base (Half-Inch Pitch)
Mount, align, and swap 3D-printed or metal mold inserts on the APSX-PIM — in minutes.
- ✔ Bushings & guide pins pre-installed · inserts mount on a ½″ grid of 1/4-20 threads (9×7 per side)
- ✔ Rapid changeovers for prototype molds, low-volume runs, and training
- ✔ Genuine APSX accessory · sourced direct from the U.S. manufacturer
From $750
Add to cart
In stock
Other Equipment
Nexa3D XiP AiR Air filter
The XiP AiR is a bluetooth-enabled desktop air filter and purifier. It comes with a HEPA filter specifically designed for Nexa3D with 5X the normal activated carbon to remove nuisance smells and hazardous VOC's from the printing environment. Only available in US and Canada.
From $214
Add to cart
In stock
Plastic Injection Molding Machine
Cyclic Olefin Copolymer 8007S Pellets - 2 lbs
A glass clear polymer with high chemical resistance and non-reactive surface.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $120
Add to cart
In stock
From teams running AM Solutions post-processing
Unedited feedback from production and R&D leads.
★★★★★
The M1 Basic was our first step off manual deburring. Small footprint, repeatable results, and it paid for itself in labor fast.
NF
Nadia Fischer Process Engineer · Industrial manufacturing
★★★★★
Perfect size for our single parts and short runs. Easy to run and the finish is consistent batch to batch.
OC
Owen Clarke Lab Manager · Medical devices
★★★★★
Quiet enough to sit right in the lab, and the sedimentation basin keeps the process water manageable.
HK
Hana Kim R&D Engineer · Consumer products
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What does the M1 Basic do?
The AM Solutions M1 Basic is an entry-level vibratory mass-finishing system. Parts move with finishing media and a compound in a high-frequency processing bowl, which deburrs, smooths and cleans metal and plastic 3D-printed parts. It automates finishing work that would otherwise be done by hand, giving repeatable results at the lowest entry cost in the AM Solutions finishing range.
Is the M1 Basic a blasting machine?
No. The M1 Basic is a vibratory mass-finishing system, not a blaster. It uses media and compound in a vibrating bowl rather than a media stream. For depowdering and blasting of powder-bed parts, Additive Plus offers the S-series; the M1 Basic is for deburring, smoothing and cleaning.
Which materials and parts is the M1 Basic for?
The M1 Basic finishes metal and plastic 3D-printed parts and is sized for single parts and small batches. Its 220 × 590 mm processing bowl suits smaller components and fine features. An Additive Plus applications engineer can recommend media and compound for your material and target finish.
What are the M1 Basic specifications?
The M1 Basic has a 220 × 590 mm (8.6 × 23.2 in) processing bowl with high-frequency processing at 3,600 RPM and a 0.65 kW drive. A 50 L sedimentation basin manages process water. It runs at ≤78 dB(A) with 24 V DC controls and is moved by stacker, pallet truck or on rollers.
How does the M1 Basic compare to the M4?
The M1 Basic is the entry-level, compact option for single parts and small batches, while the M4 offers a much larger 120 L machining volume with an integrated cleaning centrifuge and water treatment for bigger parts and higher throughput. Start with the M1 Basic for occasional finishing; step up to the M4 for production volume.
Does the M1 Basic need special installation?
The M1 Basic is compact and mobile — moved by stacker, pallet truck or on rollers — and runs on standard controls, so it is straightforward to place on the production floor. Additive Plus confirms utilities and includes install and operator training so your team runs known-good cycles from day one.
What media and compound does it use?
The M1 Basic runs AM Solutions finishing media and compound matched to the part material and target finish, with a sedimentation basin to manage the process water. Additive Plus supplies starter media and compound with the machine and handles reorders through one US point of contact.
What is the lead time and what is included?
The M1 Basic is built to order, typically 5–8 weeks. Additive Plus includes install and operator training plus starter media and compound, with spares and service through a single US point of contact — so your team is finishing parts with repeatable results from handover.
Place your order, or talk to an engineer first
Order AM Solutions M1 Basic — Entry-Level Vibratory Finishing System direct, or talk to materials engineer