In stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
Creatbot PETG Filament - 1kg
PETG filament for FDM 3D printing — the tough, low-warp all-rounder that prints as easily as PLA but takes impact and chemical exposure like a functional part, for brackets, enclosures, and water-contact fixtures.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
$20
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
Why engineers choose Creatbot PETG Filament
Four things engineers check before standardizing on a functional all-round filament.
Tough, not brittle
Higher impact resistance and layer adhesion than PLA — parts flex under load instead of snapping. A dependable choice for brackets, clips, and enclosures that get handled.
Chemical & moisture resistant
Resists water, dilute acids, and many solvents where PLA degrades — suitable for splash-exposed fixtures, containers, and outdoor-adjacent parts.
±0.02mm diameter tolerance
Tight, consistent diameter means steady extrusion — no mid-print under-extrusion from a loose spot or clogs from a tight one.
Prints without an enclosure
Low warping and strong bed adhesion mean reliable prints on an open-frame machine — none of the cracking or lifting that ABS demands.
How we ship it
Every spool of Creatbot PETG Filament leaves Gardena, CA the same way.
Print profile confirmed
Nozzle and bed temperatures verified on a CreatBot F430 before the spool is listed — not copied from a generic PETG spec sheet.
Sealed with desiccant
Vacuum-bagged with the original desiccant pack so the spool is dry on arrival, not just at the factory.
Ships from L.A. stock
In stock at our Gardena facility — 1–2 business day dispatch, datasheet included in the box.
Print compatibility
Runs on any FDM/FFF printer with a heated bed to 80°C and a nozzle rated to 250°C — no enclosure required. Slower speeds and light part cooling give the cleanest surface and strongest layers. Full mechanical and thermal property values (tested to ISO 527, ISO 178, ISO 75, and ISO 1183) are listed in the Specifications tab below.
Recommended print settings
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 230°C – 250°C |
| Build plate temperature | 70°C – 80°C |
| Chamber temperature | Not required |
| Print speed | 30 – 60 mm/s |
| Cooling fan | Low to medium |
| Nozzle type | Standard brass |
Typical applications
Where production and engineering teams run Creatbot PETG Filament.
Storage & handling
Store Creatbot PETG Filament in a cool, dry place inside its original sealed bag with the desiccant. PETG absorbs moisture over time — for long-term storage or humid environments use a dry box, or moisture shows up as stringing, bubbling, and weaker layer adhesion.
Not sure PETG is the right fit?
Three reasons teams pick a different CreatBot filament — tap the closest match.
Need heat resistance & smoothingCreatBot ABS FilamentView filament →
Need higher strength & heatCreatBot Ultra PA FilamentView filament →
Why source through Additive Plus
- Validated print profile — nozzle and bed temperatures confirmed on a CreatBot F430, not copied from a generic spec sheet.
- In-stock at our Gardena, CA facility — ships in 1–2 business days, datasheet in every box.
- A materials engineer on the line for diameter, moisture, or compatibility questions — sub-4h reply, NDA standard.
- Custom variants on request — color-matched or specialty PETG spools qualified for your application.
| Brand | CreatBot |
| Printing Materials | Plastic Filaments |
| Solid Density g/cm3 | 1.24 |
| Tensile Strength | 49 |
| Tensile Modulus (MPa) | 1650 |
| Flexural Strength (MPA) | 68 |
| Flexural Modulus (MPa) | 1600 |
| Deflection Temperature | 64 |
| Glass Transition Temperature | 80 |
| Printer | CreatBot F430 |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Printing Speed | 40mm/s |
| Infill | 100%，+/- 45° |
| Nozzle size | 0.4mm |
| Layer thickness | 0.2mm |
| Plastic Class | Standard |
| Reinforcement | Unfilled |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We source and qualify. Custom variants on request.
Need a filled, flame-retardant, or color-matched filament, or a profile for a printer we don't list yet? Our materials team qualifies the spool and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside Creatbot PETG Filament - 1kg
PP-like black resin: high elongation/impact for end-use jigs, housings & parts.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
In stock
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
Bulk washing solvent for rinsing uncured resin off SLA and LSPc 3D-printed parts — holds around 3× the dissolved resin of IPA and has a higher flash point, in a 5-gallon pack that lowers cost per litre for production.
- ✓ ~3× the resin capacity of IPA — fewer changeouts, less waste
- ✓ Higher flash point than IPA · leaves no greasy residue · water-rinse after
- ✓ 5 gallon (18.9 L) · US-made · available on request (not in stock)
Out of stock
· Not in stock — available on request
xPP405 Black is a polypropylene-like LSPc photopolymer — tough and semi-rigid with about 100% elongation at break — supplied in a 1.5 kg smart cartridge that drops straight into the Nexa3D XiP and XiP Pro.
- ✓ PP-like toughness — 100% elongation, 51 J/m notched Izod
- ✓ UV and heat-ageing tested; UL94 HB at 2 mm
- ✓ 1.5 kg smart cartridge for XiP / XiP Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
Print near-zero-expansion cordierite parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dimensionally stable oxide ceramic.
- ✓ Coefficient of thermal expansion near zero — dimensional stability through thermal cycling
- ✓ Aerospace optics, metrology and vacuum hardware; >98% dense after sintering
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.
- ✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
- ✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
KeyModel Ultra is a fast, dimensionally stable resin for dental and orthodontic models — ivory shade, crisp margins.
- ✓ Built for accurate dental and orthodontic models with sharp detail and stable dimensions
- ✓ High print speed for high-volume lab throughput on Nexa3D NXE-series printers
- ✓ Genuine Nexa3D resin · Ivory · 1 kg · ships from US stock in 2 business days
In stock
· 2 Business Days
Rigid black static-dissipative LSPc photopolymer: surface resistivity of about 10⁷ Ω to ASTM D257, with measured part surface resistance of 10⁶–10⁸ Ω from a dispersed discrete carbon-nanotube network. 5 kg bottle for Nexa3D NXE 400 and XiP.
- ✔ 10⁶–10⁸ Ω measured surface resistance — inside the 10⁶–10⁹ Ω static-dissipative band
- ✔ 68.1 MPa tensile, 97.4 MPa flexural, Shore D 87, HDT 91.3 °C at 0.45 MPa
- ✔ 5 kg bottle, Black — held in US stock, ships in 1–2 business days
In stock
· Ships in 1–2 business days from US stock.
Turbine-grade. High-temperature. Wear-resistant. Genuine Carpenter PowderRange® 939W (IN939) nickel superalloy for LPBF & EBM metal 3D printing.
- ✓ High-temp strength, wear, oxidation & corrosion resistance
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on every lot · in US stock, ready to ship
In stock
· In US stock · ready to shipPlace your order, or talk to an engineer first
Order Creatbot PETG Filament - 1kg direct, or talk to materials engineer