Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
On backorder
With every system
- Install & training commissioning, US power planning and operator onboarding on BuildStar / MakeStar®
- Validated profiles proven parameter sets for your materials and large parts
3D printers, Business 3D Printers, Engineering 3D Printers, Jigs&Fixtures 3D Printers, Large Format 3D Printers, Manufacturing 3D Printers, Nylon 3D printers, Plastic Powder, SLS 3D Printers · SLS
Farsoon Flight HT601P-4 Large-Format SLS 3D Printer – Quad-Fiber Cubic 600 Build | 600×600×600 mm
The Farsoon Flight HT601P-4 is a large-format quad-fiber SLS 3D printer — a 600 × 600 × 600 mm cubic build, four 300 W fiber lasers (1,200 W total) scanning to 20 m/s, and a 220 °C chamber for engineering polymers.
- ✓ Cubic 600 mm build · quad 300 W fiber lasers for speed and detail
- ✓ Efficiency and Quality scan modes · adjustable laser spot size
- ✓ Lead time: configured to order — US install, training and support
Price held 7 days after order.
Install + training included
Tailored service plan
What your process engineer actually checks
What your process engineer actually checks
Quad-fiber speed and detail
Four 300 W fiber lasers scan the 600 mm cubic bed at up to 20 m/s; Efficiency Mode overlaps them for speed while Quality Mode and adjustable spot size deliver fine detail — throughput and precision from one large-format machine.
An applications engineer on the line
Pre-sale help with large-part orientation, warp control and material choice; post-sale troubleshooting and validated parameters. A named engineer replies within 24 hours — we run SLS ourselves, NDA standard.
600×600×600 mm
Build volume
4×300 W fiber
Quad lasers
Up to 20 m/s
Scan speed
220 °C
Max chamber temp
Efficiency / Quality
Scan modes
Open
Material platform
About this product
The Farsoon Flight HT601P-4 is a large-format, quad-fiber SLS system built for speed and detail: four 300 W fiber lasers — 1,200 W total — scan a 600 × 600 × 600 mm cubic build at up to 20 m/s, with a 220 °C chamber for engineering polymers. Efficiency and Quality scan modes plus adjustable laser spot size tune each build for throughput or fine detail. It pairs an open platform with an interchangeable build cartridge and an Advanced Powder Management System for continuous production. Debuted at Formnext 2024. Sold, installed and supported in the US by Additive Plus.
Why production teams choose the Flight HT601P-4
Quad-fiber speed and detail on a large cubic bed — with open process control.
Cubic 600 mm build volume
A 600 × 600 × 600 mm cube — 23.6 in per side, 216 L — prints tall or bulky single parts and dense nested batches that a 400 mm system can’t fit.
Quad 300 W fiber lasers
Four 300 W fiber lasers — 1,200 W total — scan the 600 mm bed in parallel at up to 20 m/s (66 ft/s) for high-throughput production.
Efficiency & Quality modes
Adjustable laser spot size plus Efficiency Mode (overlapping lasers for speed) and Quality Mode (single-laser for fine detail) tune each build for throughput or precision.
Open platform, continuous production
Full parameter control with an interchangeable build cartridge, an Advanced Powder Management System that recycles, mixes and sieves powder, and smart production-line integration.
How Additive Plus delivers your Flight HT601P-4
A large-format production SLS system is only as good as the team behind it — here’s how we set you up.
Step 01
Configure & qualify
We confirm the material set and configuration for your parts and volumes, and help qualify the powders you plan to run on the open platform.
Step 02
Install & train
US-based installation and commissioning, power sorted for your site, and operator training on Farsoon’s BuildStar / MakeStar® workflow.
Step 03
Validated profiles & support
Proven parameter sets for your materials, large-part DfAM guidance, and local warranty and service — a named engineer replies within 24 hours.
Materials
The Flight HT601P-4 runs an open range of production SLS polymers. Additive Plus helps match the material to your application and provides validated parameters for each.
| Material | Type | Typical use |
|---|---|---|
| PA12 · PA11 | Nylon | Large functional and end-use parts |
| PA6 | Higher-temperature nylon | Parts needing more heat and stiffness |
| PBT | Engineering thermoplastic | Dimensionally stable technical parts |
| TPU | Elastomer | Flexible parts and lattices |
Farsoon’s open platform runs additional qualified SLS powders — ask our engineer.
Key specifications
| Technology | Selective laser sintering (SLS) · quad fiber · large-format cubic · open platform |
| Build volume | 23.6 × 23.6 × 23.6 in / 600 × 600 × 600 mm (216 L) |
| Laser | Quad fiber · 4×300 W (1,200 W total) |
| Scan speed | Up to 20 m/s (66 ft/s) |
| Scan modes | Efficiency (overlapping lasers) / Quality (single-laser) · adjustable spot size |
| Max chamber temperature | 220 °C (428 °F) |
| Thermal control | Multi-zone temperature control · infrared thermal monitoring |
| Powder handling | Advanced Powder Management System (recycle · mix · sieve) · interchangeable cartridge · smart production-line integration |
| Atmosphere | Nitrogen |
| Materials | PA6 · PBT · PA11 · PA12 · TPU |
Layer thickness, machine footprint and weight per the manufacturer datasheet — request the full data set from our engineer. See the Specifications tab for more.
Typical applications
Where large-format quad-fiber SLS earns its place.
Large single parts
Tall housings, ducts and covers to 600 mm
High-throughput production
Efficiency Mode across four fiber lasers
Fine-detail parts
Quality Mode, single-laser precision
Automotive
Ducting, jigs and interior parts
Consumer goods
Large functional and cosmetic parts
Flexible TPU parts
Large elastomer parts and lattices
Not sure the Flight HT601P-4 is the right Farsoon SLS system?
Compare it with the rest of the Farsoon polymer range we carry.
Tell us your part size, materials and production volume — an applications engineer will confirm whether the quad-fiber HT601P-4 or the CO₂ HT601P-2 fits, share validated parameters, and arrange a demo or sample build. Sub-4h reply, NDA standard.
Why source the Flight HT601P-4 through Additive Plus
- US sales, install & support. Installation and commissioning, US power sorted for your site, operator training and local warranty.
- Open platform, properly used. We help develop and validate profiles for your materials and large parts.
- Demo before you commit. Run your parts as a service or evaluate a system before purchase.
- Large-part DfAM help. Orientation, nesting, warp control, material selection and post-processing from engineers who run SLS.
- <24h response. 200+ qualified systems delivered across 23 countries.
| Brand | Farsoon Technologies |
| Country of origin | China |
| Build Volume | 23.6×23.6×23.6 in, 600×600×600 mm |
| Build Materials | PA11, PA12, PA6, PBT, TPU |
| Technology | SLS |
| Printing Materials | Plastic Nylon Powders |
| Laser Type | Quad fiber laser, 4×300W (1200W total) |
| Scanner | Digital galvo; scan speed up to 20 m/s; adjustable spot size |
| Scan Modes | Efficiency Mode (overlapping lasers) / Quality Mode (single-laser) |
| Max. Chamber Temperature | 220°C ( 428℉ ) |
| Thermal Field Control | Multi-zone temperature control + infrared thermal monitoring |
| Powder Management | Advanced Powder Management System — recycle, mix, sieve; interchangeable cartridge; smart production line integration |
| Comprehensive Software | BuildStar, MakeStar® |
| Inert Gas Protection | Nitrogen |
| Compatible Materials | PA6, PBT, PA11, PA12, TPU |
Product videos
Want proof before you commit?
Send us your large part and target material — we'll build it on our Farsoon SLS so you can hold the result before you invest.
Other products teams run alongside Farsoon Flight HT601P-4 Large-Format SLS 3D Printer – Quad-Fiber Cubic 600 Build | 600×600×600 mm
Business 3D Printers · Multi-material Ceramic SLA
3DCeram C101 HYBRID Multi-Material Ceramic SLA 3D Printer – Two Materials in One Layer | 100×100×150 mm
Multi-material ceramic SLA printer that prints two materials in the same layer — ceramic plus a second ceramic, metal or polymer — on a 3.9×3.9×5.9 in / 100×100×150 mm platform. It makes functionally graded and multi-material ceramic parts single-material printing can't. Full print → debind → co-sinter workflow supported by Additive Plus.
- Two materials in one layer — ceramic + ceramic, metal or polymer.
- Open-parameter R&D — 100×100×150 mm build, cartridges from 60 mL.
- Lead time: configured to order — material-pair & co-sinter support from California.
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
On backorder
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
Business 3D Printers · SLA
Kings 850Pro Industrial SLA 3D Printer – Marble Chassis | 33×33×20 in / 850×850×500 mm
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for automotive panels, one-piece patterns, dental models, and architectural forms — without stitching or Z-seam artifacts.
- ✓ 33×33×20 in / 850×850×500 mm build chamber — a full fascia pattern or a batch of shoe lasts in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
On backorder
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
Business 3D Printers · Ceramic SLA (laser stereolithography)
3DCeram C3601 Ultimate Ceramic 3D Printer – Quad-Laser SLA | 600×600×300 mm
Quad-laser SLA ceramic 3D printer for serial production — a 600×600×300 mm build envelope, four 405 nm UV lasers, and an open architecture that runs any qualified ceramic paste.
- ✓ Largest plate in the 3DCeram line — 600×600×300 mm (23.6×23.6×11.8 in)
- ✓ Support-free top-down SLA · surface roughness under 2 µm
- ✓ Lead time: configured to order — full print → debind → sinter workflow supported
On backorder
· Built to order — contact us for the current lead time and installation schedule.
Business 3D Printers · SLA
Kings 1200Pro Industrial SLA 3D Printer – Marble Chassis | 47×32×24 in / 1200×800×600 mm
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for long single-piece parts — automotive patterns, extended trim, one-piece molds — without stitching or Z-seam artifacts.
- ✓ 47×32×24 in / 1200×800×600 mm build chamber — a full-length bumper pattern in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
On backorder
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
Business 3D Printers · SLS
Farsoon 403P Series SLS 3D Printer – Open-Platform Polymer, Nylon & TPU Production | 400×400×450 mm
Open-platform industrial SLS system for polymer production — a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall), CO₂ laser and eight-zone thermal control. Runs nylons, filled compounds and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Open-parameter SLS — full process control, any compatible powder, build rates to 4.0 L/h.
- Broad materials — PA12, filled nylons, glass-bead, TPU & PP; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Prints FS1088A-TPU, FS1092A-TPU, FS3150CF, FS3250MF, FS3300PA-F, FS3401GB-F, FS4100PA, FS6140GF (for HT403P only), Ultrasint® PA6 (for HT403P only), Ultrasint® PP nat 01
On backorder
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Advanced Plastic filament · FFF + CFC (Composite Fiber Coextrusion)
Anisoprint PROM IS 500 Continuous-Fiber Composite FFF 3D Printer – CFC | 600×420×300 mm
The Anisoprint PROM IS 500 is an industrial continuous-fiber composite 3D printer that coextrudes continuous carbon or basalt fiber inside an engineering polymer — producing parts around 860 MPa tensile at ~1.4 g/cm³, roughly twice lighter than aluminum, across a 23.6×16.5×11.8 in / 600×420×300 mm build volume.
- ✔ CFC continuous fiber steered along load paths — ~860 MPa tensile at ~1.4 g/cm³
- ✔ Up to 4 swappable heads: fiber + plastic + soluble support
- ✔ High-temp extruder to 400 °C — PEEK & PEI (ULTEM), heated chamber/bed to 160 °C
- ✔ Made to order — request a quote for lead time, spares & support
Prints Continuous carbon & basalt fiber, PA, PEEK, PEI (ULTEM), PC
On backorder
· Made to order — lead time, spares and long-term support confirmed with the vendor at quote. Request a quote.
Business 3D Printers · CERAMIC SLA
С101 EASY FAB
The 3D printer to develop & prototype.
On backorder
Business 3D Printers · SLS
Farsoon HT601P-2 Large-Format SLS 3D Printer – Dual-CO₂ Cubic 600 Build | 600×600×600 mm
The Farsoon HT601P-2 is a large-format SLS 3D printer built for lower cost per part — a 600 × 600 × 600 mm cubic build, dual 100 W CO₂ lasers reaching up to 12 kg of finished parts per day, and a 220 °C chamber for engineering polymers.
- ✓ Cubic 600 mm build · dual CO₂ for lower cost per part
- ✓ Open platform — PA6, PBT, PA11, PA12, TPU
- ✓ Lead time: configured to order — US install, training and support
On backorder
· Lead time: configured to order — request a build slot. US installation and operator training included.From teams running the Flight HT601P-4
Unedited feedback from production and R&D leads.
★★★★★
Efficiency Mode across four lasers cut our large-batch build times enough to add capacity without a second machine.
NK
N. Kowalski Operations Manager · Contract Manufacturing
★★★★★
Quality Mode gave us the surface detail our consumer parts needed at production speed.
JF
J. Ferreira Production Director · Industrial Manufacturing
★★★★★
Additive Plus dialed in PA6 and helped us balance speed versus detail on big parts — strong support.
HB
H. Berg Materials Engineer · Aerospace
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What size parts can the Flight HT601P-4 build?
The Farsoon Flight HT601P-4 has a 600 × 600 × 600 mm (23.6 × 23.6 × 23.6 in / 216 L) cubic build volume — a full 600 mm in every axis, so it handles tall or bulky single parts and dense nested batches that a 400 mm-class SLS system can't fit. The cubic envelope suits large housings, ducts and high-nest production runs.
How many lasers does the Flight HT601P-4 have and how fast is it?
The Flight HT601P-4 uses four 300 W fiber lasers — 1,200 W total — scanning in parallel at up to 20 m/s. Efficiency Mode overlaps the lasers' scan fields for maximum build speed, and an interchangeable build cartridge lets one build cool and unpack while the next runs, keeping the machine in near-continuous production.
How is the Flight HT601P-4 different from the CO₂ HT601P-2?
Both share the 600 × 600 × 600 mm cubic build and 220 °C chamber. The Flight HT601P-4 uses four 300 W fiber lasers with adjustable spot size and Efficiency/Quality scan modes — faster scanning and finer detail; the HT601P-2 uses dual 100 W CO₂ lasers and is positioned as the lower-cost option. Choose the HT601P-4 for speed and detail, the HT601P-2 for cost-efficient volume.
What materials can the Flight HT601P-4 run?
The Flight HT601P-4 runs PA12 and PA11 nylons for general functional parts, PA6 for higher heat and stiffness, PBT as an engineering thermoplastic, and TPU for flexible parts. Because it is an open platform, Additive Plus can help qualify additional SLS powders and supply validated parameters for each material you plan to run.
Is the Flight HT601P-4 an open or closed material system?
The Flight HT601P-4 is a fully open platform. You control laser, scan and thermal parameters through Farsoon's BuildStar and MakeStar® software, and you are not locked to a single powder supplier. Additive Plus helps you develop and validate profiles for third-party or custom powders so you can optimise cost and part performance.
What are Efficiency and Quality scan modes?
Efficiency Mode overlaps the four fiber lasers' scan fields for maximum build speed on large or high-nest jobs. Quality Mode uses a single laser for the finest surface detail and edge accuracy. Combined with adjustable laser spot size, you can bias each build toward throughput or precision without changing machines.
What does delivery, install and support look like?
Additive Plus sells, installs and supports the Flight HT601P-4 in the US: site and power planning, commissioning, operator training on BuildStar / MakeStar®, validated material profiles, and local warranty and service. Lead time is configured to order — request a build slot and a named engineer will confirm timing and configuration.
Place your order, or talk to an engineer first
Order Farsoon Flight HT601P-4 Large-Format SLS 3D Printer – Quad-Fiber Cubic 600 Build | 600×600×600 mm direct, or talk to materials engineer