3DCeram · CERAMIC SLA
3DCeram C1000 FLEXMATIC Industrial Ceramic SLA 3D Printer – Serial Production | 320×320×200 mm
Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.
- 320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
- 7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
- Lead time: configured to order — install, training & debind/sinter support from California.
Build 12.6×12.6×7.9 in / 320×320×200 mm
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
3DCeram · CERAMIC SLA
3DCeram C101 EASY LAB Ceramic SLA 3D Printer – Lab & Material Development | 100×100×150 mm
Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Open parameters — qualify new ceramics & formulations, not just vendor recipes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Build 3.9×3.9×5.9 in / 100×100×150 mm
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
3DCeram · Multi-material Ceramic SLA
3DCeram C900 HYBRID Multi-Material Ceramic SLA 3D Printer – Up to 4 Materials | 300×300×100 mm
Production-scale multi-material ceramic SLA system: alongside the base ceramic it deposits up to three additional materials in one part, via dispensers from needle valve to micro-distribution, all in CPS 2.0. On an 11.8×11.8×3.9 in / 300×300×100 mm platform with a fine 35 µm UV laser. Full print → debind → co-sinter workflow supported by Additive Plus.
- Up to 4 materials in one part — base ceramic + 3 dispensed materials.
- Fine 35 µm UV laser — 355 nm, detail across the 300×300 mm platform.
- Lead time: configured to order — material-set & co-sinter support from California.
Build 11.8×11.8×3.9 in / 300×300×100 mm
Prints ATZ, Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Tricalcium Phosphate, Zirconia 8Y
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
Farsoon Technologies · SLS
Farsoon 252P Series SLS 3D Printer – Open Platform | 250×250×320 mm
Production-grade SLS platform for polymer R&D and small-batch manufacturing. Available in three chamber configurations — HT252P (428°F/220°C), ST252P (536°F/280°C) and UT252P (644°F/340°C) — the 252P processes PA12, PA11, PA6, TPU, PPS, PEEK and PAEK on a fully open-parameter platform.
- ✓ Eight-zone radiant heating — bed uniformity ≤ 2°C, no cold-corner warping
- ✓ Fully open parameters — laser, speed, layer thickness, temperature all user-accessible
- ✓ PEEK / PAEK capable (UT252P) — 644°F/340°C max chamber, rare at this build class
- ✓ Lead time: configured to order — US install, operator training and validated profiles included
Build 9.8x9.8x12.6 in / 250x250x320 mm
Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT
Made to order
· Configured to order — US install, training and validated profiles included; contact us for current lead time.
Farsoon Technologies · SLS
Farsoon 403P Series SLS 3D Printer – Open-Platform Polymer, Nylon & TPU Production | 400×400×450 mm
Open-platform industrial SLS system for polymer production — a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall), CO₂ laser and eight-zone thermal control. Runs nylons, filled compounds and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Open-parameter SLS — full process control, any compatible powder, build rates to 4.0 L/h.
- Broad materials — PA12, filled nylons, glass-bead, TPU & PP; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 15.7x15.7x17.7 in / 400x400x450 mm, 15.7x15.7x21.3 in / 400x400x540 mm
Prints FS1088A-TPU, FS1092A-TPU, FS3150CF, FS3250MF, FS3300PA-F, FS3401GB-F, FS4100PA, FS6140GF (for HT403P only), Ultrasint® PA6 (for HT403P only), Ultrasint® PP nat 01
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Farsoon Technologies · SLS
Farsoon eForm SLS 3D Printer – Compact Open-Platform Polymer System | 250×250×320 mm
Versatile open-platform SLS system that brings industrial polymer sintering into a compact 9.8×9.8×12.6 in / 250×250×320 mm footprint — a high-precision CO₂ laser, eight-zone thermal control and fully open parameters. An accessible step into production SLS. Sold, installed and supported in the US by Additive Plus.
- Open-parameter SLS — full process control, any compatible powder, workshop-friendly frame.
- Production materials — PA12, filled nylons, glass-bead & PP; nitrogen atmosphere.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 9.8x9.8x12.6 in / 250x250x320 mm
Prints FS3150CF, FS3250MF, FS3300PA, FS3401GB, FS4100PA, Ultrasint® PP nat 01
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Farsoon Technologies · SLS
Farsoon Flight® 403P SLS 3D Printer – Fiber-Laser High-Performance Polymer | 400×400×450 mm
Fiber-laser SLS system: a 500 W fiber laser with dynamic optics drives build rates up to 6 L/h with a fine ~100 µm contour spot, on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for high-performance polymers and demanding production, with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- 500 W fiber laser — up to 6 L/h, ~100 µm contour for crisp features.
- High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 15.7×15.7×17.7 in / 400×400×450 mm
Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
