3D Printing Post-Processing Equipment & Systems

Post-Processing Equipment

Post-processing decides whether additive manufacturing scales. Done by hand, cleaning, support removal and surface finishing can reach up to 50% of a part’s cost — and manual results vary from part to part, which blocks reproducible production.Additive Plus supplies automated post-processing systems that make those steps repeatable: depowdering, support and resin removal, IPA-free cleaning, and vibratory finishing for both polymer and metal parts — each shipped with US install, operator training and service.

18 products From $7,400

Showing 1–8 of 18 Post-Processing Equipment

goofoo · Filament Drying + Parts Annealing (Heat-Radiation)

goofoo FD01 PRO 2-in-1 Filament Dryer & 3D-Print Annealing Box – 4-Spool | Up to 100°C

Desktop 2-in-1 station that dries four filament spools and anneals printed parts up to 100°C — heat-radiation drying with feed-through ports so filament stays dry while you print.

✓ Dries four spools at once — feed-through ports keep filament dry mid-print
✓ Anneals printed parts up to 100°C to relieve internal stress and improve strength
✓ Preset filament profiles (PLA to PEEK/CF) auto-set the drying temperature
✓ Lead time: 2–3 weeks — ships to order

Prints ABS, HIPS, PA, PA-CF, PA-GF, PLA, PLA+, TPU, WOOD, PC, PETG

Get quote

Made to order

· Lead time: 2–3 weeks — ships to order

Zetamix by Nanoe

Zetasinter 4L — Tubular Debinding & Sintering Furnace

Zetasinter 4L is a tubular furnace for sintering printed metal parts under controlled atmosphere.

✔ Sinters under argon or argon and hydrogen — the atmosphere metal parts need
✔ Sized for prototyping and small production runs, not for a service bureau queue
✔ Runs on 220 V, 6 kW — no plant-level power supply required

Freight and installation requirements confirmed with you before the order is placed.

From $40,520

Add to cart

Made to order

· Ships from California · timeline confirmed at quotation

Zetamix by Nanoe

Zetasinter Chamber Mini — Compact Air Sintering Furnace

Zetasinter Chamber Mini is the compact version of the chamber furnace, for sintering printed ceramic parts in ambient air where floor space or budget rules out the full-size unit.

✔ Same air-sintering process as the full chamber furnace, in a smaller footprint
✔ Suited to labs and workshops running smaller ceramic parts
✔ Part of the Zetamix print-debind-sinter chain, supported from California

Freight and installation requirements confirmed with you before the order is placed.

From $16,020

Add to cart

Made to order

· Ships from California · timeline confirmed at quotation

Zetamix by Nanoe

Zetasinter Chamber — Air Sintering Furnace, 15 L

Zetasinter Chamber sinters printed ceramic parts in ambient air, up to 1600 °C.

✔ Sinters in ambient air — no gas supply, no atmosphere control to manage
✔ 1600 °C maximum: alumina at 1550 °C, white and black zirconia at 1475 °C
✔ 250 × 250 × 250 mm chamber takes real parts, not only test pieces

Freight and installation requirements confirmed with you before the order is placed.

From $18,200

Add to cart

Made to order

· Ships from California · timeline confirmed at quotation

Zetamix by Nanoe

Zetasinter Porcelain — 54 L Firing Oven

Zetasinter Porcelain is an electric oven for firing printed porcelain pieces.

✔ 54 litres — fire multiple pieces in a single run
✔ Fully configurable temperature programmer with several heating modes
✔ Runs on 230 V at 4.5 kW, light enough at 95 kg for a normal workshop

Freight and installation requirements confirmed with you before the order is placed.

From $7,400

Add to cart

Made to order

· Ships from California · timeline confirmed at quotation

3DCeram · Cleaning, CERAMIC SLA

3DCeram AUTO CERAKLEANER — Automated Cleaning for Ceramic 3D-Printed Green Parts

Automated cleaning system that removes excess ceramic paste from freshly printed green parts, leaving them ready to debind — replacing slow, hands-on solvent cleaning in the ceramic AM workflow.

✓ Gentle, low-mechanical-stress cleaning of fragile green parts
✓ Batch time cut dramatically vs manual (e.g. 60 min → 5 min on 70 alumina parts)
✓ Solvent longevity + recycling · no manual solvent contact

Prints Alumina, Alumina Toughened Zirconia, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Silicone Nitride, Silicore, Tricalcium Phosphate, Zirconia 3Y, Zirconia 8Y

Get quote

In stock

· Lead time, utilities and installation confirmed at quote — configured to order. Install and training included.

AM Solutions, Rösler · Cleaning

AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts

Automated cleaning system for large SLA 3D-printed parts and build platforms — a compound immersion process that cleans and loosens supports without IPA or critical solvents.

✓ IPA-free cleaning of large SLA parts up to 750 × 750 × 550 mm
✓ Auto-cleans the build platform · loosens supports for easy removal
✓ Lead time: 6–10 weeks — built & configured to order

From $95,700

Add to cart

Made to order

· Lead time: 6–10 weeks — built & configured to order. Install and operator training included.

AM Solutions, Rösler · Support removal

AM Solutions C1 — Automated Support & Resin Removal System (Benchtop)

Benchtop automated system that removes support structures and cleans uncured resin from delicate photopolymer 3D-printed parts — a compound dip process with no IPA or critical solvents.

✓ Automated support removal + cleaning for SLA / DLP / PolyJet parts
✓ IPA-free compound · 230 V plug-and-play benchtop
✓ Lead time: 5–8 weeks — built to order · install + training included

From $31,970

Add to cart

Made to order

· Lead time: 5–8 weeks — built to order. Install and operator training included.

Post-Processing Equipment

Not sure which post-processing step? We'll map your line in 20 min.

Browse other post-processing equipment

Have a CAD? Have a quote in 24h.