3D Printing Post-Processing Equipment & Systems

Post-Processing Equipment

Post-processing decides whether additive manufacturing scales. Done by hand, cleaning, support removal and surface finishing can reach up to 50% of a part’s cost — and manual results vary from part to part, which blocks reproducible production.Additive Plus supplies automated post-processing systems that make those steps repeatable: depowdering, support and resin removal, IPA-free cleaning, and vibratory finishing for both polymer and metal parts — each shipped with US install, operator training and service.

18 products From $7,400

Showing 9–16 of 18 Post-Processing Equipment

AM Solutions, Rösler · Surface finishing

AM Solutions M1 Basic — Entry-Level Vibratory Finishing System

Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.

✓ Automated deburr, smooth and clean for metal and plastic parts
✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
✓ Lead time: 5–8 weeks — built to order · install + training included
✓ Starter consumable included — 25 L of finishing media, ready to run out of the box

From $32,460

Add to cart

Made to order

· Lead time: 5–8 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Surface finishing

AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts

Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.

✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California

From $20,560

Add to cart

Made to order

· 4-6 weeks

AM Solutions, Rösler · Surface finishing

AM Solutions M4 — Mobile 2-in-1 Vibratory Finishing System

Mobile 2-in-1 vibratory mass-finishing system that deburrs, smooths and cleans metal and plastic 3D-printed parts with an integrated cleaning centrifuge and water recycling — no plumbing needed.

✓ Deburr, smooth, matte and clean in one 120 L machine
✓ Integrated water treatment — plug-and-play, <69 dB(A)
✓ Lead time: 6–9 weeks — built to order · install + training included
✓ Starter consumable included — 75 L of finishing media, ready to run out of the box

From $55,920

Add to cart

Made to order

· Lead time: 6–9 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Cleaning, Surface finishing

AM Solutions S1 Wet — Automated Wet-Blasting Cleaning & Finishing System

Automated wet-blasting cell that cleans and surface-finishes metal and polymer 3D-printed parts with a water-media slurry — dust-free, spark-free, no ATEX compliance needed.

✓ Wet blasting for metal LPBF parts + polymers — no dust, no ATEX
✓ PLC recipes, closed-loop water + media recycling
✓ Lead time: 8–12 weeks — built & configured to order

From $167,280

Add to cart

Made to order

· Lead time: 8–12 weeks — built & configured to order. Install and operator training included.

AM Solutions, Rösler · Cleaning, Surface finishing

AM Solutions S1 — Automated Depowdering & Surface Finishing System

Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.

✓ Depowdering + surface finishing in one ATEX-compliant cell
✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
✓ Lead time: 6–9 weeks — built to order · install + training included

From $69,920

Add to cart

Made to order

· Lead time: 6–9 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Cleaning, Surface finishing

AM Solutions S2 — Continuous Automated Depowdering & Finishing System

Fully automated continuous blasting line that cleans and surface-finishes whole powder-bed print jobs in 24/7 operation — load a full build, walk away.

✓ Continuous 24/7 depowdering + surface finishing, hands-free
✓ 5-nozzle PU loop belt + rotary screen drum · SLS / MJF / HSS, any brand
✓ Lead time: 8–14 weeks — built & configured to order

From $176,815

Add to cart

Made to order

· Lead time: 8–14 weeks — built & configured to order. Install, line integration and training included.

Nexa3D · LSPc, SLA, XiP

Nexa3D Freeform Injection Molding (FIM) Desktop Package — Dissolvable-Mold Tooling on the XiP

A desktop package to run Freeform Injection Molding: print a dissolvable mold in xMOLD resin on the Nexa3D XiP, inject real production material into it, then dissolve the mold away — end-use parts from a printed tool, at a fraction of hard-tooling cost.

✓ Print the mold, mold the part, dissolve the mold — ~2 days CAD-to-part
✓ Inject thermoplastics, TPE, LSR silicone, MIM metal, CIM ceramic
✓ Package: XiP printer + xMOLD resin + xWASH FiM · priced by configuration

Get quote

In stock

· Configured and quoted to your setup (incl. injection press). Install and training included; lead time confirmed at quote.

Oryx · Support removal

Oryx SCA1200HT Desktop Support Removal Station — Heated Soluble-Support Bath | 46 L

Desktop automated station that removes dissolvable support material from FDM and PolyJet 3D-printed parts in a heated, agitated water-detergent bath — no IPA, no hand-picking.

✓ Automated heated soluble-support removal (50–85 °C) for FDM & PolyJet
✓ 46 L tank · 10×10×12 in basket · quiet desktop footprint
✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing

Get quote

In stock

· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, install guidance included.

Post-Processing Equipment

Not sure which post-processing step? We'll map your line in 20 min.

Browse other post-processing equipment

Have a CAD? Have a quote in 24h.