Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
On backorder
With every system
- Install + operator training plus starter compound
- Validated cleaning recipes set and tested at handover
Other Equipment, Post-Processing Equipment, Wash&Cure · Cleaning
AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts
Automated cleaning system for large SLA 3D-printed parts and build platforms — a compound immersion process that cleans and loosens supports without IPA or critical solvents.
- ✓ IPA-free cleaning of large SLA parts up to 750 × 750 × 550 mm
- ✓ Auto-cleans the build platform · loosens supports for easy removal
- ✓ Lead time: 6–10 weeks — built & configured to order
$95,700
Price held 7 days after order.
Install + training included
Tailored service plan
What your process engineer actually checks
What your process engineer actually checks
IPA-free, safer, lower operating cost
The C1 Max cleans with a temperature-controlled compound in a combined chemical, thermal and mechanical process — no IPA and no critical solvents. That means simpler handling, fewer EHS controls and lower running cost than a solvent bath, on parts up to 750 × 750 × 550 mm.
An applications engineer on the line
Not a ticket queue. We run AM post-processing in-house, so recipe, compound and workflow advice comes from the floor. Sub-4h reply, NDA standard.
750 × 750 × 550 mm
Processing space (29.5 × 29.5 × 21.7 in)
575 L
Fill volume
IPA-free
Compound immersion process
Auto
Build-platform cleaning
~850 kg
Weight
About this product
The AM Solutions C1 Max is an automated cleaning system for large SLA 3D-printed parts and build platforms. It cleans with a temperature-controlled compound — a combined chemical, thermal and mechanical process — without IPA or critical solvents, and loosens supports for easy removal.
Why SLA labs run the C1 Max
IPA-free cleaning built for large platforms — and it cleans the platform too.
IPA-free, safer, lower cost
A temperature-controlled compound cleans through combined chemical, thermal and mechanical action — no IPA, no critical solvents. Simpler handling, fewer EHS controls and lower running cost than a solvent bath.
Built for large SLA platforms
A 750 × 750 × 550 mm processing space and 575 L fill volume handle large-format SLA parts and full build platforms — ready for systems like the 3D Systems ProX 800 and SLA 750.
Cleans the build platform too
The C1 Max automatically cleans the used SLA build platform along with the parts, removing a slow manual scrub-down and keeping platforms ready for the next build. Supports loosen for easy removal.
Automated and monitored
Storable recipes, a fill-level sensor and automatic compound dosing via an integrated pump keep cleaning consistent batch to batch — load the basket, select the recipe, and the system manages the cycle.
How the C1 Max cleans a load
Load, run the compound cycle, unload clean parts and platform.
Step 01
Load parts and platform
Place the SLA parts and the build platform into the basket and select the stored recipe for the resin and load.
Step 02
Compound immersion cycle
The basket is immersed in the temperature-controlled compound, where chemical, thermal and mechanical action lift uncured resin and loosen supports.
Step 03
Auto-dose & unload
Automatic dosing and level monitoring keep the bath in spec; unload clean parts and a cleaned platform, ready for support removal or the next build.
Where the C1 Max fits
Large-format SLA shops that want cleaning off IPA and off the bench.
Large SLA parts
Up to 750 × 750 × 550 mm
SLA build platforms
Auto-cleaned, no scrub-down
Support loosening
Faster, gentler removal
Engineering resin parts
Consistent, repeatable clean
Service bureaus
High-throughput SLA cleaning
ProX 800 / SLA 750
Ready for large-format systems
Key specifications
- Process: automated compound immersion cleaning — chemical + thermal + mechanical, IPA-free
- Processing space: 29.5 × 29.5 × 21.7 in / 750 × 750 × 550 mm
- Fill volume: 575 L · dosing: automatic via integrated pump
- Compound: RAM-D1 / RAM-D1M / RAM-D1R
- Footprint: ~1050 × 1915 × 1876 mm · weight: ~850 kg · power: 400 V, CEE 32 A
- Control voltage: 24 V DC · origin: Germany (Rösler)
See the Specifications tab for the full datasheet.
Not sure the C1 Max is the right cleaner?
Match the system to your part size and workflow.
Tell us your printer, part sizes and resins — an applications engineer will confirm whether the C1 Max fits your platform and workflow. We run AM post-processing ourselves, so the recommendation comes from the floor, not a catalog. Sub-4h reply, NDA standard.
Why source the C1 Max through Additive Plus
- Install and operator training included, with validated cleaning recipes
- Compound, spares and service through one US point of contact
- Application support from a team that runs AM post-processing in-house
- <24h response · 200+ AM systems delivered across 23 countries
| Brand | AM Solutions, Rösler |
| Technology | Cleaning |
| Country of origin | Germany |
| Dimensions of the processing space | 750 x 750 x 550 mm, 29.5 x 29.5 x 21.7 in |
| Fill volume | 575 liters |
| Subsequent dosing | With integrated pump |
| Recommended compound | RAM-D1; RAM-D1M, RAM-D1R |
| Transport | stacker, movable by rollers |
| Control voltage | 24 V DC |
See your SLA parts come out clean
Send us a batch of your large SLA parts and we will clean them on the C1 Max in California, IPA-free — you inspect cleanliness and support removal before you commit to a system.
Other products teams run alongside AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts
Plastic Injection Molding Machine · PIM (Plastic Injection Molding)
APSX-PIM V3 Desktop Injection Molding Machine – 5-Ton Clamp | 30 cc Shot | Engineering Resins
5-ton (11,000 lbf) desktop injection molder — 1.83 cu-in / 30 cc shot, up to 626°F / 330°C, running PC, nylon, ABS, PP and other engineering thermoplastics on standard or custom aluminum molds.
- ✓ Fully automatic multi-mode with ejector molds — ~60 s cycle; manual single-mode with the included test mold
- ✓ Runs on a standard 115 V (US) or 230 V (EU) outlet — 250 lb benchtop footprint, mold swap in ~15 min
- ✓ Lead time: ships in about 1 week — made in Cincinnati, OH, with US-based support
From $13500
Get quote
In stock
· About 1 week
Plastic Injection Molding Machine
Acetal (Delrin) 900P Black Pellets - 2 lbs
Acetal Homopolymer with low viscosity and improved processing.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $65
Add to cart
In stock
Media blasting · Surface finishing
AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts
Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.
- ✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
- ✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
- ✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California
From $20560
Add to cart
On backorder
· 4-6 weeks
Media blasting · Surface finishing
AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.
- ✓ Automated deburr, smooth and clean for metal and plastic parts
- ✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
- ✓ Lead time: 5–8 weeks — built to order · install + training included
- ✓ Starter consumable included — 25 L of finishing media, ready to run out of the box
From $32460
Add to cart
On backorder
· Lead time: 5–8 weeks — built to order. Install and operator training included.
Other Equipment · xWASH-FIM
Nexa3D xWASH FIM Desktop Post-Processing Wash Station (46L)
A desktop modular demolding solution for additive manufacturing with plug-and-play operation in a wide variety of environments.
From $3850
Add to cart
On backorder
Plastic Injection Molding Machine
APSX-PIM Plastic Material Starter Kit
Curated Plastic Set for Fast-Track Learning on Desktop Injection Molding Machines
From $250
Add to cart
In stock
Other Equipment
Nexa3D xCure - 100-250V
Post-curing maximizes material properties, improving parts strength, and providing consistent mechanical performance part to part and build to build.
From $7875
Add to cart
On backorder
Accessories APSX
ASTM D256 IZOD Impact Test Mold
Standard size 6061 aluminum mold machined by the Spyder CNC for the APSX-PIM.
From $500
Get quote
In stock
From teams running AM Solutions post-processing
Unedited feedback from production and R&D leads.
★★★★★
Getting off IPA simplified our whole EHS setup, and the C1 Max cleans our large SLA platforms without the manual scrub-down.
EM
Elena Marsh Process Engineer · Industrial manufacturing
★★★★★
The automatic build-platform cleaning alone saved an operator hours a week. Parts come out clean and supports pull off easily.
VN
Victor Nunes Production Lead · Service bureau
★★★★★
Recipe control keeps cleaning consistent across shifts, and dosing is hands-off. It handles our largest SLA jobs.
SA
Sofia Adler AM Manager · Automotive
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
How does the C1 Max clean without IPA?
The AM Solutions C1 Max uses a temperature-controlled compound bath that combines chemical, thermal and mechanical action to dissolve and lift uncured resin — no IPA and no critical solvents. Parts sit in a basket that is immersed in the compound, with automatic dosing and fill-level monitoring to keep the process stable. It is a cleaner, lower-cost alternative to a solvent wash.
Which parts and printers is the C1 Max for?
The C1 Max is built for large SLA (stereolithography) parts and build platforms, with a 750 × 750 × 550 mm processing space and 575 L fill volume. It is ready for large-format systems such as the 3D Systems ProX 800 and SLA 750, and is upgradeable for the Stratasys Neo 800 and 3D Systems SLA 825. An Additive Plus engineer can confirm fit for your printer.
Does the C1 Max remove support structures?
The C1 Max loosens support structures as it cleans, which makes manual support removal much faster and gentler on the part. For a system focused on automated support and resin removal of smaller parts, Additive Plus offers the benchtop C1 (listed as the C1 Support Removal System).
Can it clean the build platform too?
Yes. A key feature of the C1 Max is that it automatically cleans the used SLA build platform along with the parts, so operators skip the manual scrubbing step. That keeps platforms ready for the next build and removes a slow, messy task from the workflow.
How automated is the cleaning process?
The C1 Max runs storable recipes with a fill-level sensor and automatic compound dosing via an integrated pump, so cleaning is consistent batch to batch rather than operator-dependent. Load the basket, select the recipe, and the system manages the cycle and media replenishment.
What compound does the C1 Max use?
The C1 Max uses AM Solutions RAM-D1 compound (variants RAM-D1M and RAM-D1R), dosed automatically during the cycle. Additive Plus supplies the compound with the system and handles reorders through one US point of contact, so you are not sourcing consumables separately.
What infrastructure does the C1 Max need?
The C1 Max needs a 400 V, 3-phase supply via a CEE 32 A connector with 24 V DC controls. External dimensions are about 1050 × 1915 × 1876 mm and it weighs around 850 kg, moved by stacker or on rollers. Additive Plus reviews utilities and layout as part of installation planning.
What is the lead time and what is included?
The C1 Max is built and configured to order, typically 6–10 weeks. Additive Plus includes install and operator training plus validated cleaning recipes, and supplies compound, spares and service through a single US point of contact — so your team runs known-good cleaning from handover.
Place your order, or talk to an engineer first
Order AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts direct, or talk to materials engineer