Made to order
- Validated cure recipes pre-loaded for approved Nexa3D resins
- Install and training with US-based service and spares
Nexa3D xCURE Post-Curing Station – UV + Thermal Curing for Nexa3D Resins | 16 L
Production post-curing station combining 365 + 405 nm UV light with 30-60 °C heat in a 16 L chamber - validated cure recipes for Nexa3D photoplastics, up to three build plates per cycle.
- ✓ Six dual-wavelength LED strips, 360° chamber coverage
- ✓ Three modes: UV only, heat only, UV + heat
- ✓ Built to order - request current lead time
$7,875
What your process engineer actually checks
Cure you can repeat
Six 365 + 405 nm LED strips give 360° coverage against a reflective interior, and heat is controlled from 30 to 60 °C in 1 °C steps. Validated recipes per resin mean the same part comes out with the same mechanical properties on Monday and on Friday - not a cure guess that changes with operator or ambient temperature.
An applications engineer on the line
Questions on cure sequence, resin compatibility, or why a part is still tacky? Our engineers run resin post-processing in-house, so you get a worked answer rather than a ticket number. Sub-4h reply, NDA standard. Use the Talk to applications engineer button above.
Nexa3D xCURE is a production post-curing station that combines dual-wavelength UV light and controlled heat to finish resin parts to consistent, repeatable mechanical properties — build after build.
Why production teams cure on the xCURE
Post-curing is where resin parts reach full strength — the xCURE makes that step measurable and repeatable.
Dual-wavelength coverage
Six 365 + 405 nm LED strips wrap the chamber in 360° light with a reflective interior, covering the initiator range of Nexa3D photoplastics for even cure.
Heat plus light, three modes
30–60 °C in 1 °C increments across three modes — UV only, heat only, or UV + heat — so each material runs its correct thermal-cure sequence.
Validated resin recipes
Pre-loaded workflow-cure profiles for approved Nexa3D resins, plus a custom-input option. Consistent results without dialing in cure by trial and error.
Production capacity
A 16 L chamber takes the full NXE 400 print envelope — up to three build plates at once, or a basket for loose parts cured individually.
How the xCURE fits your workflow
Three steps from washed parts to finished, spec-ready components.
Load
Cure parts directly on the build plate, stack up to three plates, or drop loose parts in the basket. No re-fixturing between steps.
Select recipe
Pick the validated profile for your resin on the LCD, or enter a custom time-temperature-mode sequence with the rotary knob.
Cure
The chamber runs the UV and thermal sequence to full cure — delivering consistent mechanical properties part to part and build to build.
Specifications
| Parameter | Value |
|---|---|
| Chamber / part capacity | 16 L (full Nexa3D NXE 400 print envelope) |
| Light source | 6 dual-wavelength LED strips, 365 + 405 nm, 360° coverage |
| Total input power | 360 W |
| Heat range | 30–60 °C, 1 °C increments |
| Cure modes | UV only · heat only · UV + heat |
| Capacity | Up to 3 build plates, or loose-parts basket |
| Interface | LCD with rotary knob; USB recipe updates |
| Footprint (W×D×H) | 21 × 20 × 32 in / 533 × 508 × 813 mm |
| Weight | 110 lb / 50 kg (empty) |
| Power supply | US 100–120 VAC 60 Hz · EU 200–240 VAC 50 Hz |
Typical applications
Wherever resin parts need repeatable, fully cured mechanical performance.
Not sure the xCURE is the right post-processing step?
Washing and curing are two stages — here is the rest of the Nexa3D post-processing line.
Why source the xCURE through Additive Plus
- Authorized Nexa3D partner — US sales, service, and spare parts from our California facility.
- We run resin post-processing in-house — cure-recipe guidance from engineers, not a ticket queue.
- Install, training, and a tailored service plan available with every system.
- Under-24h response · 200+ AM systems delivered across 23 countries.
| Brand | Nexa3D |
| Country of origin | USA |
| Technology | UV LED + Thermal Post-Curing |
| Build Volume | 16 L chamber (full NXE 400 print envelope) |
| Weight | 110 lb / 50 kg (empty) |
Product videos
The xCURE finishes what the xWASH starts. Run both and parts go from build plate to spec-ready without re-fixturing between stages. Tell us your daily part volume and we will size the pair to your throughput.
Other products teams run alongside Nexa3D xCURE Post-Curing Station – UV + Thermal Curing for Nexa3D Resins | 16 L
In stock
Bluetooth-enabled desktop air purifier built for resin 3D printing - a HEPA stage plus a carbon stage carrying roughly 5× the activated carbon of a comparable unit, to pull resin odour and VOCs out of the room.
- ✓ Two-stage HEPA + activated-carbon filtration
- ✓ Sits on the bench - no ducting or extraction hookup
- ✓ In US stock - ships in 2 business days
Available in the United States and Canada only.
In stock
· 2 Business Days
All-in-one desktop wash and post-cure station for parts printed on the Nexa3D XiP.
- ✓ 5.5 L sealed wash bucket with a basket that takes the XiP build plate whole
- ✓ Magnetic stirring, runs on xCLEAN or isopropanol
- ✓ 405 nm LED cure tower with rotating base and reflector hood
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
In stock
· 1–2 Business Days
Production parts washer sized to the NXE 400 build volume - a 35 L Tritan reservoir with bi-directional variable-speed magnetic-impeller agitation that cleans two full build platforms per cycle.
- ✓ Accepts 2 × NXE400 / NXD200 platforms, or a loose-parts basket
- ✓ Automatic Z-axis and sealed lid cut solvent exposure and evaporation
- ✓ Built to order - request current lead time
Made to order
· Built to order - contact us for current lead time
In stock
· 1–2 Business Days
Zetasinter 4L is a tubular furnace for sintering printed metal parts under controlled atmosphere.
- ✔ Sinters under argon or argon and hydrogen — the atmosphere metal parts need
- ✔ Sized for prototyping and small production runs, not for a service bureau queue
- ✔ Runs on 220 V, 6 kW — no plant-level power supply required
Freight and installation requirements confirmed with you before the order is placed.
Made to order
· Ships from California · timeline confirmed at quotation
In stock
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers and resins is the Nexa3D xCURE compatible with?
What UV wavelengths does the xCURE use and why are there two?
Why does the xCURE add heat, and what is the temperature range?
How many parts or build plates can the xCURE process at once?
Do I still need a parts washer if I have the xCURE?
What power supply and floor space does the xCURE need?
How do I control the xCURE and can cure recipes be updated?
Place your order, or talk to an engineer first
Order Nexa3D xCURE Post-Curing Station – UV + Thermal Curing for Nexa3D Resins | 16 L direct, or talk to materials engineer