All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 553–560 of 671 Items

Nexa3D

Nexa3D XiP Alignment Kit – Build-Plate Calibration Accessory | P/N 12347-01

Genuine Nexa3D XiP Alignment Kit for build-plate leveling on the Nexa3D XiP desktop resin 3D printer — part 12347-01, in US stock and ships in 2 business days.

✓ Genuine Nexa3D alignment kit — part 12347-01 (Rev A)
✓ Levels and aligns the XiP build platform for flat first layers
✓ In US stock — ships in 2 business days

From $8

Add to cart

In stock

· 2 Business Days

3DCeram · CERAMIC SLA

Silicon Nitride 3D Printing Paste

Print silicon nitride (Si₃N₄) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to one of the hardest, most thermal-shock-resistant ceramics.

✓ 881 MPa 4-point bending strength at >97% density, 11 Weibull modulus
✓ Thermal-shock resistant with low wettability against molten metal
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Silicore 3D Printing Paste

Print robust, leachable Silicore foundry cores on 3DCeram's Ceramaker laser-SLA platform for complex, demanding castings.

✓ Higher-strength silica core formulation — survives handling and assembly
✓ Good leachability and low shrinkage (0.20% max to 1500 °C); all alloys except cobalt
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Sygnis · DIW

Sygnis Ceramic Paste for Direct Ink Writing (DIW) – Al₂O₃, ZrO₂, SiC & YSZ | Heat-Resistant Insulating Parts

Direct Ink Writing–ready ceramic pastes for robust, thermally stable, electrically insulating parts — from alumina to zirconia and silicon carbide.

Alumina (Al₂O₃), YSZ, zirconia (ZrO₂), silicon carbide (SiC), aluminosilicate and titania (TiO₂)
Formulated for DIW / paste extrusion — heat-resistant, high-strength, insulating components
Proven across automotive, medical, chemical and food-industry applications

Priced and supplied per configuration — composition, pack size and lead time confirmed at quote. NDA standard.

Request a quote →

Get quote

On backorder

· Supplied per configuration — pack size and lead time confirmed at quote.

Sygnis · DIW

SYGNIS F-NIS 23151 3D Printer

A simple, reliable desktop DIW platform for printing silicones, ceramic pastes and photopolymers — ideal for proof-of-concept and proprietary-material R&D.

230×150×150 mm tempered-glass bed, heated to 120 °C · pneumatic extrusion to 4 bar
Prints any one-component paste or semi-liquid — silicones, ceramics, resins, conductive pastes
Three versions — add UV (365/405 nm) and a heated printhead as your work demands

From $11,705 · six configurations. Built to order — pick your version and place the order, or talk to an engineer first. NDA standard.

Build 9×5.9×5.9 in / 230×150×150 mm

From $11705

Get quote

On backorder

Sygnis · DIW

Sygnis Silicone for Direct Ink Writing (DIW) — Printable Silicone Ink | 20–80 Shore A

Printable liquid silicone for Direct Ink Writing (DIW) — low viscosity for clean extrusion and low-temperature curing, in a tunable 20–80 Shore A hardness range for flexible, durable printed parts.

✓ 20–80 Shore A · service range −50 °C to 200 °C
✓ Low viscosity, low-temperature cure · bonds to metal, glass, ceramic, plastic
✓ For DIW / paste-extrusion printing · priced per configuration

Get quote

In stock

· Priced and shipped per configuration — hardness grade, pack size and lead time confirmed at quote.

3DCeram · CERAMIC SLA

Tricalcium Phosphate 3D Printing Paste

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Nexa3D · LSPc, DLP, XiP

Nexa3D x45 Natural Tough Prototyping Resin – LSPc Production Supply | 220 kg Drum

x45 Natural is BASF Forward AM's tough general-purpose photopolymer for Nexa3D LSPc printers, supplied as a 220 kg production drum — 52 MPa tensile, 12% elongation and build speeds above 15 cm/hr, sized for high-throughput XiP Pro and NXE fleets.

✓ Production-scale supply: one traceable 220 kg lot feeds a whole printer fleet
✓ Tough general-purpose resin: 52 MPa tensile, 12% elongation, Shore 85 D
✓ Ultrafast on XiP Pro and NXE — over 15 cm/hr with validated NexaX profiles
✓ Made-to-order drum — lead time confirmed at quote

From $31331

Add to cart

On backorder

· Made-to-order production drum — lead time confirmed at quote. Contact us to schedule supply to your production cadence.

Equipment

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)