Made to order
- US installation commissioning and operator training included
- Validated parameters a parameter set for your first production alloy
Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm
The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.
- ✓ 2×500 W — dual fiber lasers
- ✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
What your process engineer actually checks
Throughput per square foot
Two 500 W lasers over a 425 mm long envelope on a 37.5 sq ft / 3.48 m² footprint. In an additive factory the number that matters is parts per square foot per year, and this frame is built around it.
An applications engineer on the line
Not a ticket queue — engineers who run LPBF in production in-house at AO Metal. Alloy qualification, parameter development, troubleshooting. Sub-4h reply, NDA standard.
The Farsoon FS200M-2 is a dual-laser LPBF system built for series production in molds, tooling and automotive. A long 16.7×9.1×11.8 in / 425×230×300 mm envelope, two 500 W lasers and a 37.5 sq ft / 3.48 m² footprint — the format for parts that repeat, not one-offs.
Why engineers choose the FS200M-2
Four things your process engineer will check first.
A long envelope, not a square one
425×230×300 mm suits parts that are long rather than bulky — sole molds, rails, manifolds. You nest more of them per plate than a square frame of the same volume would allow.
Dual-laser scanning with a robust recoater
Two 500 W lasers at up to 32.8 ft/s / 10 m/s, paired with industry-leading communication speed and a recoater built for continuous running. Faster production without giving up surface quality.
Top-feed powder, no build interruption
A high-efficiency top-feed system and a separate powder delivery unit handle material without disturbing the build in progress.
Two-stage filtration, 3.48 m² footprint
An integrated two-stage filter module stretches operating time between filter changes, and the compact floor plan lets you pack more machines per square foot of factory.
How we deliver and support it
What happens between the purchase order and your first qualified part.
Scope the cell
We size the configuration against your part mix, then plan power, argon or nitrogen supply and extraction with your facilities team. Machine envelope is 91.3×59.1×78.7 in / 2320×1500×2000 mm; EUR/China: 400V±10%, 3~/N/PE, 50Hz, 25A. The US transformer ships with the machine.
Install and train in the USA
Commissioning and operator training by our US service team. First builds are run together, so your operators hand over parts rather than a checklist.
Parameters, spares, engineer
Validated parameter sets for your alloy, US-held spares, and an applications engineer who has run LPBF in production in-house at AO Metal. Sub-4h reply, NDA standard.
What the FS200M-2 is built for
Dual-Laser Metal LPBF for Series Production. The FS200M-2 runs two 500 W fiber lasers over a 16.7×9.1×11.8 in / 425×230×300 mm build envelope. Full specifications are in the Specifications tab below.
Powder handling and workflow
Qualified materials
Farsoon lists 316L and AlSi10Mg, with ST1, Maraging Steel Grade 300 and 420 in process development for the FS200M-2. Because the platform is open, a grade outside that list is a parameter development project rather than a dead end, and one we can run with you. The alloys we stock are lot-certified and held in the USA.
Typical applications
Where FS200M-2 systems are actually running.
A production case, in numbers
| Metal shoe sole mold, 316L | Figure |
|---|---|
| Machine | FS200M-2, dual laser |
| Material | 316L |
| Build time | 17 hours |
| Envelope used | 16.7×9.1×11.8 in / 425×230×300 mm |
Case as published by Farsoon. Your build time depends on geometry, nesting and parameter set.
An aluminium heat exchanger with 0.2 mm walls
Farsoon publishes an automotive heat exchanger built on the FS200M-2 with partner SAPW: internal channels and a minimum wall thickness of 0.2 mm, in aluminium. Against machining and welding it removes the joints entirely, which is usually where this class of part fails.
Not sure the FS200M-2 is the right frame size?
Three Farsoon LPBF platforms either side of it.
Taller partsFarsoon FS301MView printer →
More lasersFarsoon FS350MView printer →
Why source the FS200M-2 through Additive Plus
- US sales, installation, commissioning and operator training by our own service team.
- Applications engineering from a team that runs LPBF in production in-house at AO Metal — parameter development, not a ticket queue.
- Lot-certified metal powders stocked in the USA for the alloys this machine runs.
- Leasing and financing available on capital equipment.
- Print a paid benchmark part in California before you commit to a system.
- Response under 24 hours · 200+ AM systems delivered across 23 countries.
| Brand | Farsoon Technologies |
| External Dimensions (L×W×H) | 91.3×59.1×78.7 in / 2320×1500×2000 mm |
| Build Volume | 425×230×300 mm (16.7×9.1×11.8 in) |
| Net Weight | Approx. 4409 lb / 2000 kg |
| Layer thickness | 0.0008–0.0039 in / 0.02–0.1 mm |
| Scanning Speed | Max. 32.8 ft/s / 10 m/s |
| Laser Type | Dual fiber lasers, 2×500W |
| Scanner | F theta lenses |
| Inert Gas Protection | Argon/Nitrogen |
| Average Inert Gas Consumption in Process | 3-5 L / min |
| Operating system | 64 bit Windows 10 |
| Software | BuildStar, MakeStar® |
| Data File Format | STL |
| Key Software Features | Open machine key parameters, real-time build parameter modification, three-dimensional visualization, diagnostic functions |
| Power Supply | EUR/China: 400V±10%, 3~/N/PE, 50Hz, 25A · US: transformer supplied with the machine |
| Operating Ambient Temperature | 71.6-82.4 °F / 22-28 °C |
| Material | 316L, 420, AlSi10Mg, ST1, 18Ni300 |
| Technology | Metal LPBF |
| Printing Materials | Metal Powders |
Send your STL and we print a paid benchmark part on a Farsoon metal LPBF system in California, with the parameter set and the cost per part written up.
Other products teams run alongside Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm
Compact industrial SLA. Marble frame. Vacuum recoating. A high-performance platform for footwear lasts, dental models, engineering prototypes and patterns — without stitching or Z-seam artifacts.
- ✓ 24×24×16 in / 600×600×400 mm build chamber — nests a full tray of lasts or arches per run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
The XiP Pro is Nexa3D's industrial resin 3D printer — class-leading build volume and print speed for functional prototypes and end-use production at low cost per part.
- ✓ LCD-based LSPc (Lubricant Sublayer Photocuring) vat photopolymerization for accuracy and dimensional stability
- ✓ Class-leading build volume and print speed for high production throughput
- ✓ Runs validated and Open resins via NexaX Pro · full xWASH / xCURE post-processing available
Made to order
· Built to order — contact us for current lead time
- ✔ 2.5×1.5×1.0 m build box — the largest in the line, full molds and cores in one piece
- ✔ Plus: 312–519 L/h at ~13 s/layer · High-Speed: 213–355 L/h — CAD to sand mold in a day
- ✔ Nitrogen-free furan or inorganic binder; onboard AC, sand recovery & mixer
- ✔ Lead time: configured to order — request a quote for delivery & installation
Made to order
· Lead time: configured to order — request a quote for delivery and installation.
The InssTek MX-Fab is an all-in-one 5-axis DED metal 3D printer with a 31×39×28 in / 800×1000×700 mm work envelope — a 1,000 W (up to 2,000 W) ytterbium fiber laser, DMT closed-loop melt-pool control, and up to six powder feeders for multi-material and functionally graded parts.
- ✔ 5-axis DED with real-time DMT melt-pool feedback — dense, near-net-shape metal
- ✔ 30+ qualified alloys: Ti, Ni superalloys, stainless & tool steel, CoCr, Cu — multi-material in one build
- ✔ Fabrication, cladding, and repair on one platform
- ✔ Lead time: configured to order — request a quote for delivery & installation
Made to order
· Quote on request
Open-platform industrial SLS system for polymer production — a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall), CO₂ laser and eight-zone thermal control. Runs nylons, filled compounds and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Open-parameter SLS — full process control, any compatible powder, build rates to 4.0 L/h.
- Broad materials — PA12, filled nylons, glass-bead, TPU & PP; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
- ✔ CFC continuous fiber steered along load paths — ~860 MPa tensile at ~1.4 g/cm³
- ✔ Up to 4 swappable heads: fiber + plastic + soluble support
- ✔ High-temp extruder to 400 °C — PEEK & PEI (ULTEM), heated chamber/bed to 160 °C
- ✔ Made to order — request a quote for lead time, spares & support
Made to order
· Made to order — lead time, spares and long-term support confirmed with the vendor at quote. Request a quote.
Large-format, high-throughput SLS system: dual 100 W CO₂ lasers drive build rates up to 15 L/h across a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build, with a 220 °C chamber for high-performance polymers. Open platform, modular build-station architecture. Sold, installed and supported in the US by Additive Plus.
- Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
- Dual CO₂ · up to 15 L/h — high-volume production; 220 °C chamber, broad materials.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.
A desktop package to run Freeform Injection Molding: print a dissolvable mold in xMOLD resin on the Nexa3D XiP, inject real production material into it, then dissolve the mold away — end-use parts from a printed tool, at a fraction of hard-tooling cost.
- ✓ Print the mold, mold the part, dissolve the mold — ~2 days CAD-to-part
- ✓ Inject thermoplastics, TPE, LSR silicone, MIM metal, CIM ceramic
- ✓ Package: XiP printer + xMOLD resin + xWASH FiM · priced by configuration
In stock
· Configured and quoted to your setup (incl. injection press). Install and training included; lead time confirmed at quote.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which alloys are qualified for the Farsoon FS200M-2?
Why is the FS200M-2 build envelope long rather than square?
Is the FS200M-2 an open system, or are we locked to vendor parameters?
What part size does the FS200M-2 handle, and what fits in one build?
What does installation and training in the USA involve for the FS200M-2?
How does the FS200M-2 compare with the other Farsoon metal platforms?
Can we test the FS200M-2 before committing to a purchase?
Place your order, or talk to an engineer first
Order Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm direct, or talk to materials engineer